1992 bolt patern / offset

962 · 11-07-2009, 12:36 PM

Hello,

I have a mint 70000 miles 1992 Dodge Ram 2dr pick up 5.9L and i would like to put EOM Mag wheels from a Ram 2500 2005 265/70/17 but i wish to know if the bolt patern and the offset is the same before i purchase them . Bought are 8 nuts wheels.

If you have the info let me know

Thanks

Richard LeBar · 11-08-2009, 04:31 AM

I believe this is what you want to know: http://www.dieseltruckresource.com/d...3rd+gen+wheels

__________________
1991.5 W250 3.55 Auto CTD. DDP4, modified DennyT pin, 366, He351, 4" turbo back straight pipe, bumped timing. ~ 251.4hp/562.5 tq corrected ~ Borgeson shaft, Amsoil 4091 air filter, home-made intake, Amsoil 5W-30 synth. w/ bypass.

962 · 11-09-2009, 04:38 PM

Thanks very much

The exact info i needed. The only spacers that i found on ebay are 2'' and hope it will fit on a 2 wheels drive and hope it won't rub in the front (lower than a 4x4)

Thanks again

11-07-2009, 12:36 PM	#1 (permalink)
962 Newbie Join Date: Nov 2009 Location: Laval Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts 962's Truck Pics	1992 bolt patern / offset Hello, I have a mint 70000 miles 1992 Dodge Ram 2dr pick up 5.9L and i would like to put EOM Mag wheels from a Ram 2500 2005 265/70/17 but i wish to know if the bolt patern and the offset is the same before i purchase them . Bought are 8 nuts wheels. If you have the info let me know Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

11-08-2009, 04:31 AM	#2 (permalink)
Richard LeBar Diesel Freak Join Date: Mar 2008 Location: Thunder Bay Ontario Posts: 508 Thanks: 0 Thanked 0 Times in 0 Posts Richard LeBar's Truck Pics	I believe this is what you want to know: http://www.dieseltruckresource.com/d...3rd+gen+wheels __________________ 1991.5 W250 3.55 Auto CTD. DDP4, modified DennyT pin, 366, He351, 4" turbo back straight pipe, bumped timing. ~ 251.4hp/562.5 tq corrected ~ Borgeson shaft, Amsoil 4091 air filter, home-made intake, Amsoil 5W-30 synth. w/ bypass.

11-09-2009, 04:38 PM	#3 (permalink)
962 Newbie Join Date: Nov 2009 Location: Laval Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts 962's Truck Pics	Thanks very much The exact info i needed. The only spacers that i found on ebay are 2'' and hope it will fit on a 2 wheels drive and hope it won't rub in the front (lower than a 4x4) Thanks again