What Tires do you like - Page 2

BillyRam · 10-22-2009, 09:53 AM

I like my new tires so far. ProComp XATs 35/12.50R17 4 for the price of 3. I mostly drive on pavement and being what they are they're wonderful on the street. I did get offroad with them a few times and they do quite well for a A/T tire.
Billy

__________________
Garmon tranny SunCoast ProLoc
HTT ProStreet 66/71/13
652hp/1254tq=11.91/111.59-1/4

Got Torque · 10-22-2009, 04:01 PM

Quote:

Originally Posted by fordassassin

I would stick with the Toyo M/T or go with a Mickey Thompson ATZ or MTZ. As you already know, I ran about every set of tire and keep going back and forth.

I like the Toyo M/T and ATZ's,

Can you get the MTZ or ATZ's in a 37x12.5or13.5r22?

__________________
05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!

***meadh8*** · 10-22-2009, 04:07 PM

Quote:

Originally Posted by Got Torque

Well it's about time to get new tires. I have had 3 sets of Toyo Open Country MT. The first sets 37x13.50R20. The last set 37x13.50R22, on new MKW M19 rims. I average around 35k miles on them per set. I was looking at Kumho Mt's in this same size. Anybody have an opinion on them? Or tell me how they wear. I tow 10k everyday and am very bad about rotating. The Toyo's are really quiet for a Mud Terrain, how are the Kumhos? Anyone else have a good tire that will be 37's on a 22 in rim?

Any suggestions are appreciated.

Thanks
Ryan

just curious why you want MTs if you tow 10k every day...unless its hunting gear through a mudhole...

__________________
'07 6.7L 2500 SB 4x4 4"TBE XRTHD175ATTFASS 150ISSPRO EV2's
14.50 @ 94.2mph 1/4
Texas Trophy Trucks
918-520-2669 or 713-249-6049

Got Torque · 10-22-2009, 04:58 PM

No it's work gear. I'm on construction sites that are rutted up, tore up and usually deep sand or clay sand mix. It rains all the time here so you get the picture. Not only that MT's look way meaner on a lifted truck. Plus they are cheaper than an AT. But only a few manuf. make a 37x13.5R22. Looks like I'm going back with the Toyo I found them for 436.00 per tire

__________________
05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!

kustom4x4 · 10-25-2009, 11:34 PM

i had the kumho mt's in a 37x13.50x22 on my lifted f-250 i towed my car hauler but i did keep the tires rotated when i sold the truck i had put 35k miles on the tires and they still had 1/4 tread left, i paid $422 a tire

Got Torque · 10-28-2009, 11:13 PM

I'm looking at ssM-16's. They look good and differnent. But I did find the toyos again for 436.00 but shipping is stupid like 300 bucks. Any luck with the super swampers or even the Hankook dynapro MT's?

__________________
05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-22-2009, 09:53 AM	#13 (permalink)
BillyRam Cummins Fanatic Join Date: Aug 2008 Location: North Augusta,SC Posts: 143 Thanks: 0 Thanked 1 Time in 1 Post BillyRam's Truck Pics	I like my new tires so far. ProComp XATs 35/12.50R17 4 for the price of 3. I mostly drive on pavement and being what they are they're wonderful on the street. I did get offroad with them a few times and they do quite well for a A/T tire. Billy __________________ Garmon tranny SunCoast ProLoc HTT ProStreet 66/71/13 652hp/1254tq=11.91/111.59-1/4

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-22-2009, 04:58 PM	#16 (permalink)
Got Torque Diesel Freak Join Date: Oct 2008 Location: South Carolina Posts: 523 Thanks: 3 Thanked 11 Times in 10 Posts Got Torque's Truck Pics	No it's work gear. I'm on construction sites that are rutted up, tore up and usually deep sand or clay sand mix. It rains all the time here so you get the picture. Not only that MT's look way meaner on a lifted truck. Plus they are cheaper than an AT. But only a few manuf. make a 37x13.5R22. Looks like I'm going back with the Toyo I found them for 436.00 per tire __________________ 05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!

10-25-2009, 11:34 PM	#17 (permalink)
kustom4x4 Cummins Fan Join Date: Sep 2007 Posts: 36 Thanks: 0 Thanked 0 Times in 0 Posts kustom4x4's Truck Pics	i had the kumho mt's in a 37x13.50x22 on my lifted f-250 i towed my car hauler but i did keep the tires rotated when i sold the truck i had put 35k miles on the tires and they still had 1/4 tread left, i paid $422 a tire

10-28-2009, 11:13 PM	#18 (permalink)
Got Torque Diesel Freak Join Date: Oct 2008 Location: South Carolina Posts: 523 Thanks: 3 Thanked 11 Times in 10 Posts Got Torque's Truck Pics	I'm looking at ssM-16's. They look good and differnent. But I did find the toyos again for 436.00 but shipping is stupid like 300 bucks. Any luck with the super swampers or even the Hankook dynapro MT's? __________________ 05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!