Super swampers on a dually

Linvilles12valve · 09-12-2009, 09:29 PM

Just wonderin whose done it how much they had to space the rears and if they needed a leveling kit I would like to put at least a 34-10.50 on my truck I think it would look awesome

__________________
Linvilles12valve 97' 3500 4X4, 4:10's, #0 fuel plate slide forward, AFC cranked, Recon triple disc billet tc,tc lock up switch, Built Trans, 5" stack, isspro gauges

***ryans01*** · 09-17-2009, 11:38 PM

yeah you'd need to get a level'n kit...if you can find a set of newer 2nd gen wheels....ie- the 7 hole dually rims you won't need a spacer...but i think a 1-1/2 or 2" is all you'd need...

__________________

Ryan S.

"The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

mdtouchet · 09-19-2009, 12:44 AM

Here is mine with 35/10.5/17 SSR's with 1/4" spacer between the rear tires. They look good, but they don't last. I have 25,000 miles on them and will have to replace them soon.

__________________
Silver 06 4x4 Mega Cab Dually, 5" TBE, 2" leveling kit, BFG KM 255/75/17, Top Gun front / Frontier Gear rear bumpers, Retrax bed cover, Amp Reserch Power Steps, http://profile.myspace.com/index.cfm...ndID=146489284

09-12-2009, 09:29 PM	#1 (permalink)
Linvilles12valve Cummins Fan Join Date: Nov 2008 Location: Freedom In. Posts: 35 Thanks: 0 Thanked 0 Times in 0 Posts Linvilles12valve's Truck Pics	Super swampers on a dually Just wonderin whose done it how much they had to space the rears and if they needed a leveling kit I would like to put at least a 34-10.50 on my truck I think it would look awesome __________________ Linvilles12valve 97' 3500 4X4, 4:10's, #0 fuel plate slide forward, AFC cranked, Recon triple disc billet tc,tc lock up switch, Built Trans, 5" stack, isspro gauges

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-17-2009, 11:38 PM	#2 (permalink)
*ryans01* THE BDR Join Date: Jan 2007 Location: Walhalla, SC Posts: 1,934 Thanks: 19 Thanked 13 Times in 11 Posts ryans01's Truck Pics	yeah you'd need to get a level'n kit...if you can find a set of newer 2nd gen wheels....ie- the 7 hole dually rims you won't need a spacer...but i think a 1-1/2 or 2" is all you'd need... __________________ *Ryan S.* "The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

09-19-2009, 12:44 AM	#3 (permalink)
mdtouchet Cummins Nut Join Date: Jan 2009 Location: Erath, La. Posts: 338 Thanks: 5 Thanked 1 Time in 1 Post mdtouchet's Truck Pics	Here is mine with 35/10.5/17 SSR's with 1/4" spacer between the rear tires. They look good, but they don't last. I have 25,000 miles on them and will have to replace them soon. __________________ Silver 06 4x4 Mega Cab Dually, 5" TBE, 2" leveling kit, BFG KM 255/75/17, Top Gun front / Frontier Gear rear bumpers, Retrax bed cover, Amp Reserch Power Steps, http://profile.myspace.com/index.cfm...ndID=146489284