My new XD Addicts!

[08Ram3500SRW]

For those of you who haven't been over to the hawaii chapter to check out the new shoes, thought i'd post a couple pics in here for people who want to reference this wheel as it is brand new for 2009 from the XD series.

The pics are good, but don't do enough justice to how bad the wheel looks. It is sweeeeet!

So without further ado...enjoy (18x9 w/ 5.71" backspacing wrapped in 305/60R18 procomp xtreme at)

__________________
2008 Ram 3500 ST 4x4 SRW, 6.7L QCLB; 4.10 ratio, limited slip,exhaust brake, 6 speed auto, AFE Stage II Mega Cannon Intake,PW Fender Flares,Pamalu Blue Spary In,33" Xtreme a/ts on 18" XD Addicts...new suspension, and exhaust sometime down the road

[Ezra]

Very nice.

__________________
1993..w250..167k miles.asa modified intake.stan's 4in.S300 62/71 turbo.II 80hp injectors.piston lift pump.020 over gasket..ARP stud's ..IBEW. Union paid ,Union made.

[TxCTD0159]

im so freakin jealous thats the exact combo I want except with 35s looks flippin sweet!

__________________
-Dakotah 2000 Dark Blue Dodge 2500 Auto 24v ummins 4x4
6'' Black Mitres/BHAF Intake/FASS 150/Quadzilla Adrenaline w/ Pulse/3'' Lift/35'' BFGs/16'' MB Wheels/Smoked Out/Tool Box/Silencer Ring MIA

[Cummins6speed]

I like them just too much backspacing for me. I like them to stick out a little.

Now what I want to know is what you used to paint your bumper and grill?

__________________
My truck: 06 5.9 G56 4x4 Quad Cab Short Bed Patriot Blue. Smarty TNT, Valair 3600DD, DiPricol's, Home made intake w/ amsoil filter, Straight Piped w/ 7" tip, silencer ring MIA, glove box sticker MIA 2/28/09-470hp/980tq

IBEW 551-PACIFIC COAST DIESEL

[mojo1578]

Originally Posted by Cummins6speed

I like them just too much backspacing for me. I like them to stick out a little.

Now what I want to know is what you used to paint your bumper and grill?

They make a -12/4.53 version as well. I know a guy that's getting some for his 2nd gen...

__________________
2k2 QC 4x4 Graphite:Auto, Phat Shaft 62, Icebox, Eliminator, Firestorm 150'sHOT Juice w/ Attitude 518/1008

[O3Cummins]

Those are the exact wheels I am going to get! Looks great! Does anyone know if it is possible to get the black wheels with chrome center caps? That would look even bad-a$$er!

__________________
'03 2500 SO QC LB Auto 4X4 -- Edge Juice w/ Attitude, 5" MBRP w/ 6" tip, AFE Stage 1 w/ Cool Blue Tube. More on the way...

[cumminshakesit]

Originally Posted by Cummins6speed

I like them just too much backspacing for me. I like them to stick out a little.

Now what I want to know is what you used to paint your bumper and grill?

me to, this is what i wanna do with my grille and bumper...

__________________
2K6 mega cab, 6 spd handshaker, strait piped, Smarty Juniored, SAC #257 DTR MEGACAB CLUB #207

[trlr prk]

Sharp rims! Now I'm torn as to what I want to get. Got any pics lookin down the side to see how much they stick out? Thanks.

__________________
08 2500 QCLB 6.7. 4x4. 68RFE. Gen 1 5" SS. EGR & Cooler Gone. Hot Edge. Single Amsoil Bypass. Fleetgaurd Remote Fuel Water Sep. and 2 Micron Filter. Marathon Seat Covers. Some Bolt Ons For Looks.

[SkinInc69]

Looks good! I would have choose the 4.53" BS but them are some nice XD's!

__________________

2007.5, 6.7L 2500 4x4 LARAMIE 68RFE- H&S Performance BLACK MAXX, Industrial Injection Stage 2 CP3, FASS 150/150, H&S 5" TBE straight piped, Snow Performance water methanol injection, Capped fuel rail, EGR & Cooler delete, AFE Mega Cannon, Black Op's Diesel intake horn, 3.5" Shibby boost tube, DiPricol Gauges, 3" BDS lift, Bushwacker flares, 20x12 iON-Forged Terminators, 33x12.5 Nitto Mud Grapplers, RDX Billet Grill, Line X, 20% Tint w/ 9" brow, 10,000K HID Hi/Low, Fogs. www.hsperformance.com

[08Ram3500SRW]

Here are a few shots for ya



As far as the bumper goes, when you strip down the dodge model you can get it w/ the black bumpers all around and rubber floors so thats what i did. Underneath all that chrome they put are some nice flat black bumpers, you can order them direct from dodge or search ebay. Thats how i got the front valance on my old dodge, off ebay

I love the way the wheels turned out, now i just need to get this 5" exhaust and i be set...oh and a transfer case skid plate, anybody got one handy???

Ryan

__________________
2008 Ram 3500 ST 4x4 SRW, 6.7L QCLB; 4.10 ratio, limited slip,exhaust brake, 6 speed auto, AFE Stage II Mega Cannon Intake,PW Fender Flares,Pamalu Blue Spary In,33" Xtreme a/ts on 18" XD Addicts...new suspension, and exhaust sometime down the road

[ban89]

Good looking wheels. I was debating those for a while then just ended up with stockers again but painted them black.

That is the perfect offset/BS for our trucks. Dont have to worry about rubbing and wont add additional stress on the already weak factory ball joints.

Those looks so good i'm kind of regretting the 6 stock wheels I just bought.

__________________
2007.5 w/ 6.7l, auto, XRT 175hp, Suspended by Carli Bilstein 2.65'' and some Carli extras
Class 7 Prerunner 520HP Ford, equal length i-beams/3 link w/ King Coilovers/Bypasses/bumps

[ban89]

do you happen to know how much those weigh? I was hard pressed to find a stronger/lighter 17'' wheel than the stockers but I really like those.

__________________
2007.5 w/ 6.7l, auto, XRT 175hp, Suspended by Carli Bilstein 2.65'' and some Carli extras
Class 7 Prerunner 520HP Ford, equal length i-beams/3 link w/ King Coilovers/Bypasses/bumps