rims??

m_reynolds · 05-27-2009, 07:27 PM

I am going to get me a set of Eagle Alloy 16x10 rims to go on my truck. I was wanting to know if anybody could tell me the bolt pattern that my truck has (truck info in sig)?? I think that it is a 8x6.5 but am not positive.

Has any body ever ordered any rims online?? If so where at?? I dont know if I should feel comfortable gettin them online or not....

Also, should I put the white lettered side of the tire out of the black lettered side of the tire out??

__________________
01.5 2500 QC 4X4 6spd, DRAG COMP, KENNY DD CLUTCH, Hardened Output Shaft, RSD 5" exhaust, AEM Bruteforce, FASS 150/150, HTT Exhaust Manifold, ISSPRO (FP, boost, pyro), Thanks to James at Rollin Smoke Diesel....

***ryans01*** · 05-28-2009, 03:32 AM

yes...they are 8x6.5

i'd run the black letter'n out...

as far as the rest...i've always gone in somewhere to get my wheels, but i do plan on order'n a set of 19.5s from rickson wheels, so to me if they are a repuable place order them....

__________________

Ryan S.

"The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

scottd53 · 05-28-2009, 07:22 AM

order eagle alloys from nation tire and wheel...best price i could find on eagle alloys...

__________________
01 2500 auto w/Edge Comp, Edge Jammer 125hp nozzles, Super B Special, DTT TC and VB, FASS 150/150, 5in straight to black 6in turn-outs, 6in AMSOIL filter , 7in lift w/ 38x15.5 Baja Claws, Autometer Gauges... EGT,Boost,Fuel Pressure,Tranny Temp

m_reynolds · 05-28-2009, 06:32 PM

okay, heres another question......wil a set of 285/75 R16 fit a 16x10 rim????

__________________
01.5 2500 QC 4X4 6spd, DRAG COMP, KENNY DD CLUTCH, Hardened Output Shaft, RSD 5" exhaust, AEM Bruteforce, FASS 150/150, HTT Exhaust Manifold, ISSPRO (FP, boost, pyro), Thanks to James at Rollin Smoke Diesel....

scottd53 · 05-29-2009, 06:52 AM

i dont see y they wouldnt

__________________
01 2500 auto w/Edge Comp, Edge Jammer 125hp nozzles, Super B Special, DTT TC and VB, FASS 150/150, 5in straight to black 6in turn-outs, 6in AMSOIL filter , 7in lift w/ 38x15.5 Baja Claws, Autometer Gauges... EGT,Boost,Fuel Pressure,Tranny Temp

Big R · 05-31-2009, 06:37 PM

Quote:

Originally Posted by m_reynolds

okay, heres another question......wil a set of 285/75 R16 fit a 16x10 rim????

those will fit fine. I have a set of eagle alloys i am looking to get rid of, what kind you lookin for exactly? PM me i can email u pics of them

__________________
99 Cummins

05-27-2009, 07:27 PM	#1 (permalink)
m_reynolds Diesel Freak Join Date: Jan 2008 Location: Waynesburg, KY Posts: 645 Thanks: 14 Thanked 2 Times in 2 Posts m_reynolds's Truck Pics	rims?? I am going to get me a set of Eagle Alloy 16x10 rims to go on my truck. I was wanting to know if anybody could tell me the bolt pattern that my truck has (truck info in sig)?? I think that it is a 8x6.5 but am not positive. Has any body ever ordered any rims online?? If so where at?? I dont know if I should feel comfortable gettin them online or not.... Also, should I put the white lettered side of the tire out of the black lettered side of the tire out?? __________________ 01.5 2500 QC 4X4 6spd, DRAG COMP, KENNY DD CLUTCH, Hardened Output Shaft, RSD 5" exhaust, AEM Bruteforce, FASS 150/150, HTT Exhaust Manifold, ISSPRO (FP, boost, pyro), Thanks to James at Rollin Smoke Diesel....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

05-28-2009, 03:32 AM	#2 (permalink)
*ryans01* THE BDR Join Date: Jan 2007 Location: Walhalla, SC Posts: 1,934 Thanks: 19 Thanked 13 Times in 11 Posts ryans01's Truck Pics	yes...they are 8x6.5 i'd run the black letter'n out... as far as the rest...i've always gone in somewhere to get my wheels, but i do plan on order'n a set of 19.5s from rickson wheels, so to me if they are a repuable place order them.... __________________ *Ryan S.* "The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

05-28-2009, 07:22 AM	#3 (permalink)
scottd53 Cummins Nut Join Date: Aug 2007 Location: Saegertown, Pa Posts: 382 Thanks: 0 Thanked 2 Times in 2 Posts scottd53's Truck Pics	order eagle alloys from nation tire and wheel...best price i could find on eagle alloys... __________________ 01 2500 auto w/Edge Comp, Edge Jammer 125hp nozzles, Super B Special, DTT TC and VB, FASS 150/150, 5in straight to black 6in turn-outs, 6in AMSOIL filter , 7in lift w/ 38x15.5 Baja Claws, Autometer Gauges... EGT,Boost,Fuel Pressure,Tranny Temp

05-28-2009, 06:32 PM	#4 (permalink)
m_reynolds Diesel Freak Join Date: Jan 2008 Location: Waynesburg, KY Posts: 645 Thanks: 14 Thanked 2 Times in 2 Posts m_reynolds's Truck Pics	okay, heres another question......wil a set of 285/75 R16 fit a 16x10 rim???? __________________ 01.5 2500 QC 4X4 6spd, DRAG COMP, KENNY DD CLUTCH, Hardened Output Shaft, RSD 5" exhaust, AEM Bruteforce, FASS 150/150, HTT Exhaust Manifold, ISSPRO (FP, boost, pyro), Thanks to James at Rollin Smoke Diesel....

05-29-2009, 06:52 AM	#5 (permalink)
scottd53 Cummins Nut Join Date: Aug 2007 Location: Saegertown, Pa Posts: 382 Thanks: 0 Thanked 2 Times in 2 Posts scottd53's Truck Pics	i dont see y they wouldnt __________________ 01 2500 auto w/Edge Comp, Edge Jammer 125hp nozzles, Super B Special, DTT TC and VB, FASS 150/150, 5in straight to black 6in turn-outs, 6in AMSOIL filter , 7in lift w/ 38x15.5 Baja Claws, Autometer Gauges... EGT,Boost,Fuel Pressure,Tranny Temp