Advice on a wheel

TAS · 05-27-2009, 06:52 PM

Can anyone see a potential problem w/ this wheel? The front will have a 2" leveling kit. http://store.summitracing.com/partde...5&autoview=sku

I ran the numbers through a wheel calculator and it seems to be ok. It will stick out 2.2" farther than stock but that will be addressed w/ flares.

Edit: I'll be running 35x12.5's on these.

Just looking for some advice before I pull the trigger. Thanks

Todd

__________________
Silver 07, 5.9, g56, quad, long bed, 4x4 Just a Smarty Jr. for now.
98 TJ on 35's w/ a few mods.
Oh yea...they're both all mine!

***ryans01*** · 05-28-2009, 03:29 AM

well...the page won't show the product, but i wouldn't think there would be a problem, not run'n 35s anyways...

__________________

Ryan S.

"The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

TAS · 05-28-2009, 11:06 AM

Don't know what happened to the link so, here it is again.

Summit SUM-185-7882B - Summit® 185 Series Wheels

__________________
Silver 07, 5.9, g56, quad, long bed, 4x4 Just a Smarty Jr. for now.
98 TJ on 35's w/ a few mods.
Oh yea...they're both all mine!

05-27-2009, 06:52 PM	#1 (permalink)
TAS Newbie Join Date: Jun 2008 Location: Baton Rouge area Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts TAS's Truck Pics	Advice on a wheel Can anyone see a potential problem w/ this wheel? The front will have a 2" leveling kit. http://store.summitracing.com/partde...5&autoview=sku I ran the numbers through a wheel calculator and it seems to be ok. It will stick out 2.2" farther than stock but that will be addressed w/ flares. Edit: I'll be running 35x12.5's on these. Just looking for some advice before I pull the trigger. Thanks Todd __________________ Silver 07, 5.9, g56, quad, long bed, 4x4 Just a Smarty Jr. for now. 98 TJ on 35's w/ a few mods. Oh yea...they're both all mine!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

05-28-2009, 03:29 AM	#2 (permalink)
*ryans01* THE BDR Join Date: Jan 2007 Location: Walhalla, SC Posts: 1,934 Thanks: 19 Thanked 13 Times in 11 Posts ryans01's Truck Pics	well...the page won't show the product, but i wouldn't think there would be a problem, not run'n 35s anyways... __________________ *Ryan S.* "The BDR Edition" 2001 4 X 4, 3500, 2nd NV4500, II SO VP, SBC DD 3600 12CB w/ input shaft AND Valair HD HYDRO'S, TSTPM3, Edge EZ, AFE, FASS HPFP, 5" turnout stacks, gauges 319.9/776.8 4/25/09 DUNBAR'S DYNO

05-28-2009, 11:06 AM	#3 (permalink)
TAS Newbie Join Date: Jun 2008 Location: Baton Rouge area Posts: 28 Thanks: 0 Thanked 0 Times in 0 Posts TAS's Truck Pics	Don't know what happened to the link so, here it is again. Summit SUM-185-7882B - Summit® 185 Series Wheels __________________ Silver 07, 5.9, g56, quad, long bed, 4x4 Just a Smarty Jr. for now. 98 TJ on 35's w/ a few mods. Oh yea...they're both all mine!