18X10's

[12vWes]

Looking for my options with 18x10's? For a 3rd gen and going to be wrapped in 35" Toyo's. Oh ya I want a wiiiiiide stance

__________________
Soon to have CR

[12vWes]

Buuuuuuuuuuuuump

__________________
Soon to have CR

[DRT086.7]

Do you have a lift? Ive got 18x10s theres a pic in my truck pics with no lift but they love to rub I can only get about 3/4 of a turn on the wheel b4 they rub.

__________________
08 6.7 6-spd man Quadcab 4x4 EGR all gone, Shibby Grid Heater+Stage 1 Intake horn, 5" SS TBE, AFE intake tube, Airaid, Edge, Diablo EPP, Pure Performance 4", SBC DD 3600, 35/12.50x18s on Jesse James Lawless8's, Recon cab lights 487hp/972tq

[tclappcummins]

mine are Incubus Recoil's 18x10 on 35x13.5's I have just a LITTLE bit of rubbing all it rubs is the black plastic of the fender wells nothing that a little trimming wouldn't fix

__________________
Travis 06 2500 Megacab 4x4 gets a bath twice a week

[12vWes]

Thanks man that helps. Anymore options for 18x10s? I can't find much online for info (or in the search here.

__________________
Soon to have CR

[Bigmac18]

Eagle Alloy 140 Series or 114 series come in 18x10
Mazzi Hulks also.

[TAF4Mopar]

ION forged Terminator 8's...just ordered my 18x10 for my truck.

__________________
2006 5.9 Black Sport QC 4X4 - 4.5" Fabtech Lift - AFE Stg 2 Pro 7 - Boost Fooler - Superchips Programmer - 5" Turboback Exhaust - Rock Krawler Track Bar

[6.7cumminspower]

Originally Posted by tclappcummins

mine are Incubus Recoil's 18x10 on 35x13.5's I have just a LITTLE bit of rubbing all it rubs is the black plastic of the fender wells nothing that a little trimming wouldn't fix

what backspace and offset you runnin because i want 35s with aftermarket wheels to stick out and not rub???

__________________
07.5, 6.7, G56, H&S stage 2 DPF, K2 EGR, mbrp tailpipe, K&N air intake, Edge juice w/att. H&S XRT, soon to come southbend and airdog!!

[SkinInc69]

If you want a real wide stance get some 18x12's with -51mm offset(4.5" BS). Then you will have some stance!

__________________

2007.5, 6.7L 2500 4x4 LARAMIE 68RFE- H&S Performance Hot Damn 175 ATT, Industrial Injection Stage 2 CP3, FASS 150/150, H&S 5" TBE straight piped, Snow Performance water methanol injection, Capped fuel rail, EGR & Cooler delete, AFE Mega Cannon, Black Op's Diesel intake horn, 3.5" Shibby boost tube, DiPricol Gauges, 3" BDS lift, Bushwacker flares, 20x12 iON-Forged Terminators, 33x12.5 Nitto Mud Grapplers, RDX Billet Grill, Line X, 20% Tint w/ 9" brow, 10,000K HID Hi/Low, Fogs. www.hsperformance.com

[tclappcummins]

Originally Posted by 6.7cumminspower

what backspace and offset you runnin because i want 35s with aftermarket wheels to stick out and not rub???

umm to be honest I dont remember what my backspacing is but my offset is a -25mm...... I have 13.5 wide tires and they rub just a little bit on the black plastic of the fender well..... nothing major what so ever

__________________
Travis 06 2500 Megacab 4x4 gets a bath twice a week

[Smoke um up]

Yalls don't rub on the corner of the fender at all, cause I hade to shave my fender slightly ant a little of the plastic around it.

__________________
2006 Dodge 2500 with Cummins (of course!) , Quad LB, Banks Monster exhaust, MIA is the silencer ring and the kitty cat, Banks ram air, Edge juice w/attitude HOT, 2.5" levelers 18x9 Eagle Alloys 197 w/ 325/65/18 nitto terra graps

[shroyer702]

Helo 820 come in 18x10 with either a 4.5" bs or 5.89" bs. Oh and you can get them at about $135 a wheel. I am getting them with a 5.89"bs and putting 325/60 Nitto Dura Grapplers. The tires are 13" wide.

__________________
2003 Dodge Ram2500 Cummins- 4x4, reg. cab, 6spd, silver, straight pipe, 5" single mitre cut stack,---S&B CAI,S&B intake,Silencer Ring gone, isspro EGT, boost---Smarty Beta 4.2 on #9, Haisley Machine street drag clutch, FASS 150