weld stone crushers??

9812v5spd · 01-14-2009, 09:53 PM

whos runnin them? and who has some they wana sell i guess they dont make them anymore, or maybe the super single version or the chrome bart wheels? i love the classic 16" wheel look as opposed to the big rim sizes now a days, dont get me wrong, big wheels look good i had 18's on my truck. just wondering, because in my opinion wheels/tires make/brake the look of a truck. ill post a pic of what im runin in the mornin-over

__________________
98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

2003_Ram · 01-14-2009, 11:47 PM

Weld went under, anyone correct me if I'm wrong.

Did you check 4-wheel parts?

__________________
'03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods...

NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!

sniper · 01-15-2009, 12:01 AM

I didn't know Weld went under i hate to hear that, they were $$$$ but they seemed to make real good quality wheels and very strong! Stonecrushers are a cool looking wheel, i have a buddy that runs em on his powerstroke, no complaints other than they suck to polish!

__________________
2005 CC SB G56
Smarty-SB3600 DD-FBD 5"-Araid Intake-Isspro Gauges
Centerlines-Mickey Thomson ATZ-Clarion Audio

joelliott · 01-15-2009, 12:02 AM

iIF weld did go under, its cuz their wheels are just too dam expensive! Good stuff I believe but way to pricey.
Joe E.

__________________
06' Dodge Ram 2500 Cummins 4x4 9"lift 38.5"tires
Joe E.

2003_Ram · 01-15-2009, 12:21 AM

Actually on a side note to people buying wheels, my Granddad and I went on a trip to Alaska before in hsi truck, he had Weld Mountain Crushers on it, one wheel cracked and leaked air on the trip back. It was all street driving, but rough roads.

Forged wheels are the only way to go on a truck I think.

__________________
'03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods...

NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!

***409Cummins*** · 01-15-2009, 12:36 AM

Quote:

Originally Posted by joelliott

iIF weld did go under, its cuz their wheels are just too dam expensive! Good stuff I believe but way to pricey.
Joe E.

too pricey?!

jeez i bought a set of draglite 15x8 and 15x10s for my duster and BFG radial T/As to go with em, and spent just under 1000 bucks....and that was without any discounts.....

theres no way they went out of business, there are WAY to many people that run welds on their muscle cars and hot rods

__________________

Nathan

08 2500 RCLB Flame Red 4x4 6.7L G56- Smoked, Tinted, Line-X'ed, AEM Brute Force

91 W250 RCLB 2 Tone Silver 5.9L 727 Non IC- Leveled, 33s, Str8 Pipe, Pump Cranked

9812v5spd · 01-15-2009, 12:45 AM

ya there truck wheels definatly are pricey. i think its weldwheels.com... all it says is "coming soon" or somethin like that. maybe there makin a comeback who knows. but i relly want those wheels, mine are similar but not true...there 16x10s not sure of the brand

__________________
98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

2003_Ram · 01-15-2009, 12:06 PM

Search Craigslist, will probably find some.

EDIT: And I talked to 4-wheel parts and Desert rat searching for Weld Mountain crusher (my original choice in wheel) and they told me Weld has not been answering the phone or e-mail and they cannot contact them. They also had a liquidation sale and sold wheels at 70% off.

__________________
'03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods...

NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!

Last edited by 2003_Ram : 01-15-2009 at 12:08 PM.

9812v5spd · 01-15-2009, 12:54 PM

ive been on craigslist everyday multiple times searching the whole state of oregon. no luck yet

__________________
98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

joelliott · 01-16-2009, 11:16 PM

Not pricey? Have you looked at the original prices on these truck wheels? For a 20x10 they were in the $400+ range (a piece). I got my mickey thompsons for Just over $200 a piece. I thought their commando wheels were nice. But 4 wheel parts sale didnt have the size I wanted.
Joe E.

__________________
06' Dodge Ram 2500 Cummins 4x4 9"lift 38.5"tires
Joe E.

***409Cummins*** · 01-16-2009, 11:32 PM

oh well i never bought a set of truck wheels from weld, my bad on that. theyre car wheels are cheap as it gets, i got the draglites for $125 a wheel or so

__________________

Nathan

08 2500 RCLB Flame Red 4x4 6.7L G56- Smoked, Tinted, Line-X'ed, AEM Brute Force

91 W250 RCLB 2 Tone Silver 5.9L 727 Non IC- Leveled, 33s, Str8 Pipe, Pump Cranked

***RedRum*** · 01-16-2009, 11:38 PM

They are doing business under a new name it appears. Saw their ad in Diesel Power. The impact series are the truck wheels. Doesn't look like you can get the traditional designs anymore.

Home :: Greg Weld Designs

__________________
2007 3500 QCLB, 5.9, ISSPRO, AFE Stage 2, AF1 intake horn, Smarty, SB 3600#, Straight Piped with 6" Mitres, 6" lift, Bilstein 5100s/dual steering stabs., trac bars 37" BFG M/Ts, CUMMINS FORUM STICKER!May 2009 ROTM-Thanks to James @ RSD for stepping up!
2006 3500 QC Bighorn, 6 speed, No silencer ring, B&W turnover, other than that, stock
"I Caught that diesel thing, now it stings when I pee"

01-14-2009, 09:53 PM	#1 (permalink)
9812v5spd Diesel Freak Join Date: Jun 2008 Location: Gresham,OR Posts: 915 Thanks: 0 Thanked 4 Times in 4 Posts 9812v5spd's Truck Pics	weld stone crushers?? whos runnin them? and who has some they wana sell i guess they dont make them anymore, or maybe the super single version or the chrome bart wheels? i love the classic 16" wheel look as opposed to the big rim sizes now a days, dont get me wrong, big wheels look good i had 18's on my truck. just wondering, because in my opinion wheels/tires make/brake the look of a truck. ill post a pic of what im runin in the mornin-over __________________ 98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

01-14-2009, 11:47 PM	#2 (permalink)
2003_Ram Diesel Freak Join Date: Jan 2009 Location: Airznoa Posts: 740 Thanks: 16 Thanked 8 Times in 8 Posts 2003_Ram's Truck Pics	Weld went under, anyone correct me if I'm wrong. Did you check 4-wheel parts? __________________ '03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods... *NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!*

01-15-2009, 12:01 AM	#3 (permalink)
sniper Diesel Freak Join Date: Dec 2006 Location: Crittenden, Kentucky Posts: 610 Thanks: 0 Thanked 7 Times in 7 Posts sniper's Truck Pics	I didn't know Weld went under i hate to hear that, they were $$$$ but they seemed to make real good quality wheels and very strong! Stonecrushers are a cool looking wheel, i have a buddy that runs em on his powerstroke, no complaints other than they suck to polish! __________________ 2005 CC SB G56 Smarty-SB3600 DD-FBD 5"-Araid Intake-Isspro Gauges Centerlines-Mickey Thomson ATZ-Clarion Audio

01-15-2009, 12:02 AM	#4 (permalink)
joelliott Cummins Nut Join Date: May 2006 Location: LaBelle, FL Posts: 475 Thanks: 0 Thanked 0 Times in 0 Posts joelliott's Truck Pics	iIF weld did go under, its cuz their wheels are just too dam expensive! Good stuff I believe but way to pricey. Joe E. __________________ 06' Dodge Ram 2500 Cummins 4x4 9"lift 38.5"tires Joe E.

01-15-2009, 12:21 AM	#5 (permalink)
2003_Ram Diesel Freak Join Date: Jan 2009 Location: Airznoa Posts: 740 Thanks: 16 Thanked 8 Times in 8 Posts 2003_Ram's Truck Pics	Actually on a side note to people buying wheels, my Granddad and I went on a trip to Alaska before in hsi truck, he had Weld Mountain Crushers on it, one wheel cracked and leaked air on the trip back. It was all street driving, but rough roads. Forged wheels are the only way to go on a truck I think. __________________ '03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods... *NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!*

01-15-2009, 12:45 AM	#7 (permalink)
9812v5spd Diesel Freak Join Date: Jun 2008 Location: Gresham,OR Posts: 915 Thanks: 0 Thanked 4 Times in 4 Posts 9812v5spd's Truck Pics	ya there truck wheels definatly are pricey. i think its weldwheels.com... all it says is "coming soon" or somethin like that. maybe there makin a comeback who knows. but i relly want those wheels, mine are similar but not true...there 16x10s not sure of the brand __________________ 98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

01-15-2009, 12:06 PM	#8 (permalink)
2003_Ram Diesel Freak Join Date: Jan 2009 Location: Airznoa Posts: 740 Thanks: 16 Thanked 8 Times in 8 Posts 2003_Ram's Truck Pics	Search Craigslist, will probably find some. EDIT: And I talked to 4-wheel parts and Desert rat searching for Weld Mountain crusher (my original choice in wheel) and they told me Weld has not been answering the phone or e-mail and they cannot contact them. They also had a liquidation sale and sold wheels at 70% off. __________________ '03 Dodge Ram Sport Long Bed 6 speed, AFE intake, Banks 5", 35's, M12000, Banks 6 gun....... Some other mods... *NOBAMA! sticker happily placed on my bumper!<--- WAS! SOMBODY RIPPED IT OFF!* Last edited by 2003_Ram : 01-15-2009 at 12:08 PM.

01-15-2009, 12:54 PM	#9 (permalink)
9812v5spd Diesel Freak Join Date: Jun 2008 Location: Gresham,OR Posts: 915 Thanks: 0 Thanked 4 Times in 4 Posts 9812v5spd's Truck Pics	ive been on craigslist everyday multiple times searching the whole state of oregon. no luck yet __________________ 98 qaud cab long bed, 12V,3k GSK, 15* timing, nv4500 w/ SB 1 3/8" input shaft, SB con ofe, 5th gear nut, #100 plate, BHAF, 5" straight pipe, pyro/boost gauges , 8" RCD long arm, 385/70 MUD GRAPPLERS(37x15.5x16s)

01-16-2009, 11:16 PM	#10 (permalink)
joelliott Cummins Nut Join Date: May 2006 Location: LaBelle, FL Posts: 475 Thanks: 0 Thanked 0 Times in 0 Posts joelliott's Truck Pics	Not pricey? Have you looked at the original prices on these truck wheels? For a 20x10 they were in the $400+ range (a piece). I got my mickey thompsons for Just over $200 a piece. I thought their commando wheels were nice. But 4 wheel parts sale didnt have the size I wanted. Joe E. __________________ 06' Dodge Ram 2500 Cummins 4x4 9"lift 38.5"tires Joe E.

01-16-2009, 11:32 PM	#11 (permalink)
*409Cummins* Diesel Freak Join Date: Sep 2008 Location: Grove City, Ohio Posts: 879 Thanks: 0 Thanked 1 Time in 1 Post 409Cummins's Truck Pics	oh well i never bought a set of truck wheels from weld, my bad on that. theyre car wheels are cheap as it gets, i got the draglites for $125 a wheel or so __________________ Nathan 08 2500 RCLB Flame Red 4x4 6.7L G56- Smoked, Tinted, Line-X'ed, AEM Brute Force 91 W250 RCLB 2 Tone Silver 5.9L 727 Non IC- Leveled, 33s, Str8 Pipe, Pump Cranked

01-16-2009, 11:38 PM	#12 (permalink)
*RedRum* Black Smoke Addict Join Date: May 2007 Location: Durango, Co Posts: 1,133 Thanks: 12 Thanked 25 Times in 16 Posts RedRum's Truck Pics	They are doing business under a new name it appears. Saw their ad in Diesel Power. The impact series are the truck wheels. Doesn't look like you can get the traditional designs anymore. Home :: Greg Weld Designs __________________ 2007 3500 QCLB, 5.9, ISSPRO, AFE Stage 2, AF1 intake horn, Smarty, SB 3600#, Straight Piped with 6" Mitres, 6" lift, Bilstein 5100s/dual steering stabs., trac bars 37" BFG M/Ts, **CUMMINS FORUM STICKER!May 2009 ROTM-Thanks to James @ RSD for stepping up! 2006 3500 QC Bighorn, 6 speed, No silencer ring, B&W turnover, other than that, stock "I Caught that diesel thing, now it stings when I pee"**