Diver Side Headlight

***oilpatchcummins*** · 09-10-2008, 08:28 PM

Has anyone here had to change the bulb on an 08 2500. I did the passenger side couple weeks ago and the airfilter box has to come out to gain acess to the bulb. Just wondering is there a simple way to get to the driver side bulb. As far as i can tell the washer fluid tank will have to come out.

Any feedback would be great

__________________
08 6.7ltr Q/C 4X4 Metallic Grey Edge w/ Attitude AFE stage 2 intake

wizkiddrummer · 09-16-2008, 10:00 PM

Take the headlight out.
2 10mm bolts on the front of the light, should see them with the hood open.
1 10mm nut on the back of the headlight. Look in the fender well, should be a little "gasket". Pop that out, and you sould be able to get at it with a socket on an extension.
Then there's a little "clip" holding the front edge of the headlight nearest the fender. I use an autobody spoon to slip between the light and the fender and pop the light out but you can find somethin similar or just pull. Just be a little careful because you can break that "clip".
Easiest way in my opinion.

-Seth

09-10-2008, 08:28 PM	#1 (permalink)
*oilpatchcummins* Newbie Join Date: May 2008 Location: lethbridge alberta Posts: 19 oilpatchcummins's Truck Pics	Diver Side Headlight Has anyone here had to change the bulb on an 08 2500. I did the passenger side couple weeks ago and the airfilter box has to come out to gain acess to the bulb. Just wondering is there a simple way to get to the driver side bulb. As far as i can tell the washer fluid tank will have to come out. Any feedback would be great __________________ 08 6.7ltr Q/C 4X4 Metallic Grey Edge w/ Attitude AFE stage 2 intake

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-16-2008, 10:00 PM	#2 (permalink)
wizkiddrummer Newbie Join Date: Sep 2008 Location: Montana Posts: 4 wizkiddrummer's Truck Pics	Take the headlight out. 2 10mm bolts on the front of the light, should see them with the hood open. 1 10mm nut on the back of the headlight. Look in the fender well, should be a little "gasket". Pop that out, and you sould be able to get at it with a socket on an extension. Then there's a little "clip" holding the front edge of the headlight nearest the fender. I use an autobody spoon to slip between the light and the fender and pop the light out but you can find somethin similar or just pull. Just be a little careful because you can break that "clip". Easiest way in my opinion. -Seth