VIN summary information

***Towtug*** · 03-30-2006, 03:09 PM

I would like to extend an offer to all my Cummins Forum. com buddies.

If you would like to know what recalls if any are out on your vehicle or would just like to know build information and or what applicable warranties are on your vehicle please send me a PM. I will give you the feedback you want.

Summary of information to be had is as follows:
*General discription of vehicle
*In Service Date
*Paint codes
*Complete vehicle options
*Recall information
*Selling dealer
*Warranty summary
and tons of other information that you would probably never think of.

The things I will need to know is the following:
1st: Last 9 digits of the VIN number.
2nd: The current mileage on your odometer.
3rd: I need the first 4 letters of the last name of the person that it is registered to.

I don't know if this kind of info is helpful for everyone but it might help some so just ask.

JOSH

__________________
2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next...

Stop By And Vote For ROTM

MR4WLR · 03-30-2006, 03:12 PM

Sounds like it would nice to have all that in a list.

I'll have to send a PM after I get home.

__________________
Corey Ritter - Amity, OR
'04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K
513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR
Hauls Lance "Lite" 1025 @4klbs
Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

***Tom05*** · 03-30-2006, 03:26 PM

I got that info from my local dealer. It covers FOUR PAGES. Guys, it is very good info to have. Take advantage of the offer.
Tom

__________________
www.midwestdieselconnection.com

***Towtug*** · 03-30-2006, 03:39 PM

Yes any dealer can give you the info. Technically Chrysler does not want the dealership handing out the documentation. Thats one of thier rules.

I dont have anymore info that the other dealerships have, Im jsut offering it up for convenience sake.

It is kinda cool to look at that stuff though.

JOSH

__________________
2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next...

Stop By And Vote For ROTM

***Tom05*** · 03-30-2006, 05:48 PM

That is great that you will do that for us Josh. Like I said, four pages of info. There is just about anything you might want on there!!

__________________
www.midwestdieselconnection.com

***CD in NM*** · 03-30-2006, 08:21 PM

What a great gift Josh. I would love to have all that information - PM on the way. I have a Miata and was able to get the same information, it has saved the day many a time in knowing the little things the build sheets have to offer. I did not have the luxury of this type of information regarding my Ford Truck - wow were parts a hassle - so many different changes all throughout their production in a year. I had to always tear something down and just take it with me when I needed to rebuild or repair. I could never outguess the parts, simple things like gaskets became a simple nightmare, dash numbers always got the best of me. Thanks Josh, really a great thing to do.

CD

__________________
2006 Dodge 3500 SLT MC, 6-spd, 3.73 L/S, 4x4, SRW. ISSPRO-FP-Boost-EGT,DiPricol-RP,Ice Box,Blue Hose,GDP intake horn,PacBrake,ME. Amsoil BMK-11, GDP 2-micron-big lines. KORE Leveling, DefiantSS,H2's/BFG315's,MagHytek-F/R. RanchHand-Grille Guard-HeadacheRack-Rear Bumper. RideRites-PopUp GN-Prodigy-CobraCB.

mschn99 · 03-30-2006, 09:41 PM

Quote:

Originally Posted by CD in NM

What a great gift Josh. I would love to have all that information - PM on the way. I have a Miata and was able to get the same information, it has saved the day many a time in knowing the little things the build sheets have to offer. I did not have the luxury of this type of information regarding my Ford Truck - wow were parts a hassle - so many different changes all throughout their production in a year. I had to always tear something down and just take it with me when I needed to rebuild or repair. I could never outguess the parts, simple things like gaskets became a simple nightmare, dash numbers always got the best of me. Thanks Josh, really a great thing to do.

CD

if you still have that ford truck and need the info...if its less than ten years old.....i can do the same on it.........Marc

***Towtug*** · 03-31-2006, 06:43 AM

All PM's answered!!!

JOSH

__________________
2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next...

Stop By And Vote For ROTM

MR4WLR · 03-31-2006, 07:21 AM

Thanks Josh

Interesting seeing every detail of the options listed out.

__________________
Corey Ritter - Amity, OR
'04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K
513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR
Hauls Lance "Lite" 1025 @4klbs
Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

***CD in NM*** · 03-31-2006, 08:03 AM

Thanks very much Josh. Good stuff to know. I am in hopes I never need the information concerning axle codes and parts!

Marc. Thanks for the offer, I still have the pickup, but it's a little past 10 years, 1989 model has 368,000 on it. All pretty much towing and farm/ranch work. I just finished going through both axles, tranny and transfer case, complete rebuild. That was my parts nightmare. I did the engine a year ago. It has been a dependable workhorse. Up until now I have not done any major repairs, just normal wear parts.

__________________
2006 Dodge 3500 SLT MC, 6-spd, 3.73 L/S, 4x4, SRW. ISSPRO-FP-Boost-EGT,DiPricol-RP,Ice Box,Blue Hose,GDP intake horn,PacBrake,ME. Amsoil BMK-11, GDP 2-micron-big lines. KORE Leveling, DefiantSS,H2's/BFG315's,MagHytek-F/R. RanchHand-Grille Guard-HeadacheRack-Rear Bumper. RideRites-PopUp GN-Prodigy-CobraCB.

randylamarr · 03-31-2006, 09:38 AM

you will have a pm on the way thanks man

__________________
1998 2500 Crew Cab (1 of a kind) Twin turbos, Performance fuel system, top secret cam and pistons. 5.9 Cummins with an inline pump and a 24 valve cylinder head, NV 4500 with EEP twin disc clutch.

Monster Truck · 04-17-2006, 07:34 PM

Hey i droped you a pm Towtug

__________________
95 Ext Cab SLT, Loaded, built 5spd with hurst, 3.54s, Leveled 4'' Lift 35'' Toyos, optima redtops, 4'' Straight into a 5'' bed kit with 6'' Mitres, Protech, Super B 57/66/14, Stage 2 Sticks, 3GSK, #60 Valve Springs, Stage 2 clutch, BHAF, Plateless, Boost and EGT on the pillar fuel pressure on the colum.

03-30-2006, 03:09 PM	#1 (permalink)
*Towtug* Tech Specialist Join Date: Feb 2006 Location: Plano Texas Posts: 593 Towtug's Truck Pics	VIN summary information I would like to extend an offer to all my Cummins Forum. com buddies. If you would like to know what recalls if any are out on your vehicle or would just like to know build information and or what applicable warranties are on your vehicle please send me a PM. I will give you the feedback you want. Summary of information to be had is as follows: General discription of vehicle In Service Date Paint codes Complete vehicle options Recall information Selling dealer *Warranty summary and tons of other information that you would probably never think of. The things I will need to know is the following: 1st: Last 9 digits of the VIN number. 2nd: The current mileage on your odometer. 3rd: I need the first 4 letters of the last name of the person that it is registered to. I don't know if this kind of info is helpful for everyone but it might help some so just ask. JOSH __________________ 2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next... Stop By And Vote For ROTM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

03-30-2006, 03:12 PM	#2 (permalink)
MR4WLR Administrator Join Date: Feb 2006 Location: Amity, OR Posts: 3,718 MR4WLR's Truck Pics	Sounds like it would nice to have all that in a list. I'll have to send a PM after I get home. __________________ Corey Ritter - Amity, OR '04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K 513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR Hauls Lance "Lite" 1025 @4klbs Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

03-30-2006, 03:26 PM	#3 (permalink)
*Tom05* Diesel Head Join Date: Dec 2005 Posts: 4,442 Tom05's Truck Pics	I got that info from my local dealer. It covers FOUR PAGES. Guys, it is very good info to have. Take advantage of the offer. Tom __________________ www.midwestdieselconnection.com

03-30-2006, 03:39 PM	#4 (permalink)
*Towtug* Tech Specialist Join Date: Feb 2006 Location: Plano Texas Posts: 593 Towtug's Truck Pics	Yes any dealer can give you the info. Technically Chrysler does not want the dealership handing out the documentation. Thats one of thier rules. I dont have anymore info that the other dealerships have, Im jsut offering it up for convenience sake. It is kinda cool to look at that stuff though. JOSH __________________ 2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next... Stop By And Vote For ROTM

03-30-2006, 05:48 PM	#5 (permalink)
*Tom05* Diesel Head Join Date: Dec 2005 Posts: 4,442 Tom05's Truck Pics	That is great that you will do that for us Josh. Like I said, four pages of info. There is just about anything you might want on there!! __________________ www.midwestdieselconnection.com

03-30-2006, 08:21 PM	#6 (permalink)
*CD in NM* Cummins Nut Join Date: Feb 2006 Location: Capitan, New Mexico Posts: 480 CD in NM's Truck Pics	What a great gift Josh. I would love to have all that information - PM on the way. I have a Miata and was able to get the same information, it has saved the day many a time in knowing the little things the build sheets have to offer. I did not have the luxury of this type of information regarding my Ford Truck - wow were parts a hassle - so many different changes all throughout their production in a year. I had to always tear something down and just take it with me when I needed to rebuild or repair. I could never outguess the parts, simple things like gaskets became a simple nightmare, dash numbers always got the best of me. Thanks Josh, really a great thing to do. CD __________________ 2006 Dodge 3500 SLT MC, 6-spd, 3.73 L/S, 4x4, SRW. ISSPRO-FP-Boost-EGT,DiPricol-RP,Ice Box,Blue Hose,GDP intake horn,PacBrake,ME. Amsoil BMK-11, GDP 2-micron-big lines. KORE Leveling, DefiantSS,H2's/BFG315's,MagHytek-F/R. RanchHand-Grille Guard-HeadacheRack-Rear Bumper. RideRites-PopUp GN-Prodigy-CobraCB.

03-31-2006, 06:43 AM	#8 (permalink)
*Towtug* Tech Specialist Join Date: Feb 2006 Location: Plano Texas Posts: 593 Towtug's Truck Pics	All PM's answered!!! JOSH __________________ 2006 CTD MEGACAB 3500 4x4 AUTO Towing my Rockbuggy from one state to the next... Stop By And Vote For ROTM

03-31-2006, 07:21 AM	#9 (permalink)
MR4WLR Administrator Join Date: Feb 2006 Location: Amity, OR Posts: 3,718 MR4WLR's Truck Pics	Thanks Josh Interesting seeing every detail of the options listed out. __________________ Corey Ritter - Amity, OR '04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K 513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR Hauls Lance "Lite" 1025 @4klbs Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

03-31-2006, 08:03 AM	#10 (permalink)
*CD in NM* Cummins Nut Join Date: Feb 2006 Location: Capitan, New Mexico Posts: 480 CD in NM's Truck Pics	Thanks very much Josh. Good stuff to know. I am in hopes I never need the information concerning axle codes and parts! Marc. Thanks for the offer, I still have the pickup, but it's a little past 10 years, 1989 model has 368,000 on it. All pretty much towing and farm/ranch work. I just finished going through both axles, tranny and transfer case, complete rebuild. That was my parts nightmare. I did the engine a year ago. It has been a dependable workhorse. Up until now I have not done any major repairs, just normal wear parts. __________________ 2006 Dodge 3500 SLT MC, 6-spd, 3.73 L/S, 4x4, SRW. ISSPRO-FP-Boost-EGT,DiPricol-RP,Ice Box,Blue Hose,GDP intake horn,PacBrake,ME. Amsoil BMK-11, GDP 2-micron-big lines. KORE Leveling, DefiantSS,H2's/BFG315's,MagHytek-F/R. RanchHand-Grille Guard-HeadacheRack-Rear Bumper. RideRites-PopUp GN-Prodigy-CobraCB.

03-31-2006, 09:38 AM	#11 (permalink)
randylamarr Cummins Fan Join Date: Dec 2005 Location: Belgium Posts: 89 randylamarr's Truck Pics	you will have a pm on the way thanks man __________________ 1998 2500 Crew Cab (1 of a kind) Twin turbos, Performance fuel system, top secret cam and pistons. 5.9 Cummins with an inline pump and a 24 valve cylinder head, NV 4500 with EEP twin disc clutch.

04-17-2006, 07:34 PM	#12 (permalink)
Monster Truck Moderator Join Date: Nov 2005 Location: Kingston, WA Posts: 1,963 Monster Truck's Truck Pics	Hey i droped you a pm Towtug __________________ 95 Ext Cab SLT, Loaded, built 5spd with hurst, 3.54s, Leveled 4'' Lift 35'' Toyos, optima redtops, 4'' Straight into a 5'' bed kit with 6'' Mitres, Protech, Super B 57/66/14, Stage 2 Sticks, 3GSK, #60 Valve Springs, Stage 2 clutch, BHAF, Plateless, Boost and EGT on the pillar fuel pressure on the colum.