Cummins Grill logo

[wildcat]

Oh, and BTW, I have another idea I'll be writing up soon, for those of you that like Cummins Logo stuff...

__________________
Bill Mish
2007 Dodge 3500 4X4/5.9L/48RE, SRT-10 hood, Recon, Isspro, ICEBOX/Amsoil, Walbro, SMARTY, FBD CFM+, FBD HGD, FBD 5" exhaust. 418hp/800tq

[bobdodge]

I have been wondering this since you posted it but did you paint the bottom portion of the C or just leave it?

__________________
2006 2500 QC, SB, AT, Icebox, Straight Pipe, Tone Ring Mod, Isspro EGT, Boost &, Tranny temp, Amsoil, 80 gal transfer tank, Pac Brake airbags, Tow mirrors,
Smarty Jr!

[wildcat]

Originally Posted by bobdodge

I have been wondering this since you posted it but did you paint the bottom portion of the C or just leave it?

Just left it. If you do it right, you will only have a very small portion of the "C" that isn't chrome on the bottom, and it isn't noticable at all.

__________________
Bill Mish
2007 Dodge 3500 4X4/5.9L/48RE, SRT-10 hood, Recon, Isspro, ICEBOX/Amsoil, Walbro, SMARTY, FBD CFM+, FBD HGD, FBD 5" exhaust. 418hp/800tq

[05bigoil]

looks sick!! nicley done

[Atchley]

That looks really good. I like it alot better than the ram head.

__________________
1995 2500 blue reg cab, 5sp, Bhaf, plateless, starwheel turned, 4inch exhaust, silencer ring mia, Valair clutch

[cumminsturbo94]

Originally Posted by wildcat

Oh, and BTW, I have another idea I'll be writing up soon, for those of you that like Cummins Logo stuff...

whats your idea?

__________________
'94 ram 2500 12-valve, 4x4, 3.55's, 47rh, autometer pyro boost and trans on the a-pillar, muffler and silencer ring MIA.

[wildcat]

Originally Posted by cumminsturbo94

whats your idea?

Well, it actually turned out pretty cool!

I Just finished the mod, I still need to write it up... I was working on a cool skid plate/crossmember idea, got kinda carried away on that one, not documenting the beginning... sometimes that happens because you are not entirely sure where you will end up. BUT, after seeing you were somewhat eager to see what I had in mind, I switched gears and went with the Next Logo Mod.

Check here for a link to it, in case you miss it on New Posts. I have one other idea after this one, which shouldn't be too difficult to guess... Pretty easy to see where I'm going with these totally "Horsepower Free Modifications"!!

Ohh, yeah, stay tuned for a better skid plate system than the factory offers, if that is at all interesting to you. More or less an Advanced fabricator write up, but hell, I did it, so it can't be THAT advanced!!

BTW, I giggled when I saw what the Factory offered...

Got some work to do, let me know what you think.

__________________
Bill Mish
2007 Dodge 3500 4X4/5.9L/48RE, SRT-10 hood, Recon, Isspro, ICEBOX/Amsoil, Walbro, SMARTY, FBD CFM+, FBD HGD, FBD 5" exhaust. 418hp/800tq

[wildcat]

OK. Here it is.

http://www.cumminsforum.com/forum/te...-cap-logo.html

Can anyone guess what the next "Cummins" mod will be?


Should be an easy guess!

__________________
Bill Mish
2007 Dodge 3500 4X4/5.9L/48RE, SRT-10 hood, Recon, Isspro, ICEBOX/Amsoil, Walbro, SMARTY, FBD CFM+, FBD HGD, FBD 5" exhaust. 418hp/800tq

[cumminsturbo94]

well i consider myself to be a fairly good fabricator. i think i could handle makin a skid plate

Originally Posted by wildcat

Check here for a link to it, in case you miss it on New Posts. I have one other idea after this one, which shouldn't be too difficult to guess... Pretty easy to see where I'm going with these totally "Horsepower Free Modifications"!!

wears the link!?

__________________
'94 ram 2500 12-valve, 4x4, 3.55's, 47rh, autometer pyro boost and trans on the a-pillar, muffler and silencer ring MIA.

[cumminsturbo94]

never mind about that link



im a little slow

__________________
'94 ram 2500 12-valve, 4x4, 3.55's, 47rh, autometer pyro boost and trans on the a-pillar, muffler and silencer ring MIA.

[rollin smoke in a'92]

nice, looks good but I cant do that on my 1st gen....oh well

__________________
1992 Dodge Cummins, EXT. cab,long bed, dually,4X4. Stock but mods are cummin!

[Cummins6speed]

awesome work! you should make and sell them

__________________
My truck: 06 5.9 G56 4x4 Quad Cab Short Bed Patriot Blue. Home made intake w/ amsoil filter, magnaflow high flow cat, muffler delete, silencer ring MIA glove box sticker MIA
Mods to come: DiPricol gauges, Smarty/MP-8 stack, Valair 750hp clutch, 150hp injectors, twins, upgraded CP3, dual feed line, 7" single stack, Air dog 150, Carli Performance 2.5
IBEW Local 551