Drop Spindels for a 3500

[owensfz1]

Does anyone know where I can purchase a set of drop spindels for a 94 3500. I've saw them for a 1500, but I can't find them for a 3500.

[carolinarednek]

I had saw some once but I can't remember where. Just google it. I'm sure you'll find something.

__________________
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE Time to spend the money now!

[NickBeek]

Ricers -R- Us?????

__________________
2006 Dodge, 2500, CTD, 4x4, 6 Speed, SLT, Thunder Road Package, Mineral Grey, MBRP Muffler Replacement Kit, Fast Idle Enabled.

[owensfz1]

Originally Posted by carolinarednek

I had saw some once but I can't remember where. Just google it. I'm sure you'll find something.

I'll check again on google but I haven't had any luck in the past. Thanks though.

[Broke Down]

try bell tech or DJM they might have something.

__________________
2000 4x4 3/4 ton ex cab lwb ATS converter,suncoast heavyduty rebuild kit,ATS valve body,copiolt,edge EZ, and a big hole in the seat.

[carolinarednek]

I did a little search of my own and this is what I came up with.

Dodge Ram Spindle Drop?

This should answer your question.

__________________
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE Time to spend the money now!

[gotsoot]

C/R: I have a set of Bell tech lowering springs for a 3500.I`ll take $75.00, also hae a set of lower A-arms and some rear leafs.come take a look and make me an offer. J.R.@864- 630-1790

[Rollin Coal]

pics pics pics...... im quite interested

__________________

'01 - 2500, 47re 2wd, 53 Block 77k+ miles and counting.... no cracks
THANKS TO HOLLAND COURT DIESEL

[owensfz1]

Originally Posted by carolinarednek

I did a little search of my own and this is what I came up with.

Dodge Ram Spindle Drop?

This should answer your question.

Thanks for the link I'll research a little more. I want to drop the front but don't want to lose the ride. I'm leaving the rear the same height. I tow a 5th wheel and Need the rear where it is.

Thanks again

[owensfz1]

Originally Posted by gotsoot

C/R: I have a set of Bell tech lowering springs for a 3500.I`ll take $75.00, also hae a set of lower A-arms and some rear leafs.come take a look and make me an offer. J.R.@864- 630-1790

If you still have the lowering springs I may be interested. Do you know how the ride is when they are installed? is it about a 3" drop?

[Rollin Coal]

you want to drop the front 3" and leave the rear stock......??

you have to drop the rear 3-4" just to level the truck, thats going to look ridiculous.

is your truck 2wd or 4wd

__________________

'01 - 2500, 47re 2wd, 53 Block 77k+ miles and counting.... no cracks
THANKS TO HOLLAND COURT DIESEL

[owensfz1]

Originally Posted by rock kustoms

you want to drop the front 3" and leave the rear stock......??

you have to drop the rear 3-4" just to level the truck, thats going to look ridiculous.

is your truck 2wd or 4wd

Sorry Guys I've been out of town and havent been able to get on the forum. I do want to leave the rear stock. I have saw one done like this before and it looks pretty good. I can't really drop the rear due to pulling a fifth wheel. And it is a 2wd. It's a 94 and the rear doesn't sit as high as the 2000 and up. If anyone has any I am open for suggestions