South Bend Clutch

HARRISDIESEL · 10-23-2007, 07:18 PM

As you all know my double disc clutch has broke in my truck

!!! I called Peter at SBC yesturday and explained to him that the pressure plate fingers had bent by the throwout bearing!! So he said he would send me a new clutch!! No questions asked!!

If that aint a good warranty!! I dont know what one is!!! So I highly recomend SBC for all your clutch needs!!! Thanks Peter!!

__________________
02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

Shilohsho · 10-23-2007, 07:24 PM

Will, have you gotten the clutch out of the truck yet? Did Peter have any explanation on why this happened?

I'm the one that had the only Gasser on Diesel dyno day. I was shocked any of you guys cared about my ride. Next time I need to bring the work truck!
later, Tucker

HARRISDIESEL · 10-23-2007, 07:31 PM

O yeah whats up? The clutch will be out tomorrow!! but no!!! just a new one

__________________
02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

Drew · 10-24-2007, 04:05 AM

and thats another reason why I'm wanting to replace mine with a SBC. . .make sure you take pics of the carnage.

Tucker. . .we may be diesel guy's. . .but were also gear heads. dropping a LS1 into a truck like that is going to get some attention

__________________
04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty
10/20/07 425hp 798tq still on the stock clutch, how much longer will she last

Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

triton · 10-24-2007, 05:18 AM

hey Will, is your buddy ( sorry didn't get his name ) still in need of a cooler ? If not, I'm gonna list it for sale but, I don't have a problem holding it for him.

btw... don't one of you need a good turbo :-)

HTT 64/14 Quick diesel

__________________

07 3500 Mega 5.9L CTD
754hp/1400tq on #2
runNADM.com Black Patch Diesel

Last edited by triton : 10-24-2007 at 05:22 AM.

Texas Diesel · 10-24-2007, 05:20 AM

This is why we use SBC's in both trucks.

Had a problem once and Peter sent a new clutch overnight at his expense.

I sent the old clutch back and he emailed back the dampener springs were not tempered as they should have been.

__________________
His: 01.5 3500 Quad Cab 6 sp 6wd Hers: 98 2500 Quad Cab 5 sp 12V (no CAT) [b] | 2 cycle oil added to the diesel fuel @ 200:1 | Amsoil bypass filter on both = 20,000 mile oil changes

| NRA |

BIGBADGREYDODGE · 10-24-2007, 06:39 PM

Quote:

Originally Posted by triton

hey Will, is your buddy ( sorry didn't get his name ) still in need of a cooler ? If not, I'm gonna list it for sale but, I don't have a problem holding it for him.

btw... don't one of you need a good turbo :-)

HTT 64/14 Quick diesel

yea i still need that intercooler if u would hold it for me till next friday. and the names cj

__________________
2005 3500 srw 4dr 4wd, smarty, tst pmcr (r49), goerend tranny with sonnax billet input, bhaf, 5" to 4" dual exhaust, 4 1/2" lift, 37s (10/20/07 dyno. 447 whp. and 991 lb.ft. torque)

NickBeek · 10-24-2007, 07:12 PM

Will, glad to hear your gonna be up and runnin soon and your wallet (sorry BILLFOLD)aint any lighter.

Tucker, I'm not a chevy guy, but your truck is cool!

Ty, how about a "lease to own" program for that turbo?

__________________
2006 Dodge, 2500, CTD, 4x4, 6 Speed, SLT, Thunder Road Package, Mineral Grey, MBRP Muffler Replacement Kit, Fast Idle Enabled.

HARRISDIESEL · 10-24-2007, 07:59 PM

Ok I got a update on Clutch #2!!! When I pulled the tranny out tonight i found that the clutch pack closes to the flywheel--the center where it splines to the input shaft--was just about wore the heck out!! The pressure plate was also screwed up with some button broke!! the pressure plate clutch pack looked good with just a normal wear!! I have a new pressure plate from SBC but I need a hole new clutch flywheel and all!!! and I have to put a new input shaft in my tranny bc the splines have a wear place from the worn clutch pack!! Which sucks bad!!!! But I will get it done!!

__________________
02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

Drew · 10-25-2007, 09:59 AM

good lord. . .when it rains it pours. . . .

__________________
04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty
10/20/07 425hp 798tq still on the stock clutch, how much longer will she last

Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

HARRISDIESEL · 10-25-2007, 10:07 AM

Thank god Peter took good care of me though!!!

__________________
02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

kuntryboy369 · 02-08-2008, 04:35 PM

hey man, what SBC did you get? after what i read on their web page, and seeing what your saying about them im sold! i know i want one, i just dont know how much is too much. oh i have an '02 2500, 5 speed, 5'' silverline, fass 95 and edge comp. box, (with some big dreams down the road.) ANY insite would be awsome!

__________________
'02, 2WD, 2500, Edge comp. box, 5'' Silverline exhaust, Fass fuel system and big line kit. (for now)

10-23-2007, 07:18 PM	#1 (permalink)
HARRISDIESEL Cummins Enthusiast Join Date: Oct 2007 Location: Fair Play SC Posts: 228 HARRISDIESEL's Truck Pics	South Bend Clutch As you all know my double disc clutch has broke in my truck!!! I called Peter at SBC yesturday and explained to him that the pressure plate fingers had bent by the throwout bearing!! So he said he would send me a new clutch!! No questions asked!! If that aint a good warranty!! I dont know what one is!!! So I highly recomend SBC for all your clutch needs!!! Thanks Peter!! __________________ 02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-23-2007, 07:24 PM	#2 (permalink)
Shilohsho Cummins Fan Join Date: Oct 2007 Location: Seneca, SC Posts: 50 Shilohsho's Truck Pics	Will, have you gotten the clutch out of the truck yet? Did Peter have any explanation on why this happened? I'm the one that had the only Gasser on Diesel dyno day. I was shocked any of you guys cared about my ride. Next time I need to bring the work truck! later, Tucker

10-23-2007, 07:31 PM	#3 (permalink)
HARRISDIESEL Cummins Enthusiast Join Date: Oct 2007 Location: Fair Play SC Posts: 228 HARRISDIESEL's Truck Pics	O yeah whats up? The clutch will be out tomorrow!! but no!!! just a new one __________________ 02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

10-24-2007, 04:05 AM	#4 (permalink)
Drew Tech Specialist Join Date: Apr 2006 Location: Fayetteville Ga Posts: 960 Drew's Truck Pics	and thats another reason why I'm wanting to replace mine with a SBC. . .make sure you take pics of the carnage. Tucker. . .we may be diesel guy's. . .but were also gear heads. dropping a LS1 into a truck like that is going to get some attention __________________ 04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty 10/20/07 425hp 798tq still on the stock clutch, how much longer will she last Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

10-24-2007, 05:18 AM	#5 (permalink)
triton Cummins Nut Join Date: Dec 2006 Location: NC mountains Posts: 402 triton's Truck Pics	hey Will, is your buddy ( sorry didn't get his name ) still in need of a cooler ? If not, I'm gonna list it for sale but, I don't have a problem holding it for him. btw... don't one of you need a good turbo :-) HTT 64/14 Quick diesel __________________ 07 3500 Mega 5.9L CTD 754hp/1400tq on #2 runNADM.com Black Patch Diesel Last edited by triton : 10-24-2007 at 05:22 AM.

10-24-2007, 05:20 AM	#6 (permalink)
Texas Diesel Cummins Fan Join Date: Oct 2007 Location: Awesome, Texas Posts: 47 Texas Diesel's Truck Pics	This is why we use SBC's in both trucks. Had a problem once and Peter sent a new clutch overnight at his expense. I sent the old clutch back and he emailed back the dampener springs were not tempered as they should have been. __________________ His: 01.5 3500 Quad Cab 6 sp 6wd Hers: 98 2500 Quad Cab 5 sp 12V (no CAT) [b] \| 2 cycle oil added to the diesel fuel @ 200:1 \| Amsoil bypass filter on both = 20,000 mile oil changes \| NRA \|

10-24-2007, 07:12 PM	#8 (permalink)
NickBeek Cummins Nut Join Date: Jan 2007 Location: Upstate, SC Posts: 329 NickBeek's Truck Pics	Will, glad to hear your gonna be up and runnin soon and your wallet (sorry BILLFOLD)aint any lighter. Tucker, I'm not a chevy guy, but your truck is cool! Ty, how about a "lease to own" program for that turbo? __________________ 2006 Dodge, 2500, CTD, 4x4, 6 Speed, SLT, Thunder Road Package, Mineral Grey, MBRP Muffler Replacement Kit, Fast Idle Enabled.

10-24-2007, 07:59 PM	#9 (permalink)
HARRISDIESEL Cummins Enthusiast Join Date: Oct 2007 Location: Fair Play SC Posts: 228 HARRISDIESEL's Truck Pics	Ok I got a update on Clutch #2!!! When I pulled the tranny out tonight i found that the clutch pack closes to the flywheel--the center where it splines to the input shaft--was just about wore the heck out!! The pressure plate was also screwed up with some button broke!! the pressure plate clutch pack looked good with just a normal wear!! I have a new pressure plate from SBC but I need a hole new clutch flywheel and all!!! and I have to put a new input shaft in my tranny bc the splines have a wear place from the worn clutch pack!! Which sucks bad!!!! But I will get it done!! __________________ 02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

10-25-2007, 09:59 AM	#10 (permalink)
Drew Tech Specialist Join Date: Apr 2006 Location: Fayetteville Ga Posts: 960 Drew's Truck Pics	good lord. . .when it rains it pours. . . . __________________ 04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty 10/20/07 425hp 798tq still on the stock clutch, how much longer will she last Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

10-25-2007, 10:07 AM	#11 (permalink)
HARRISDIESEL Cummins Enthusiast Join Date: Oct 2007 Location: Fair Play SC Posts: 228 HARRISDIESEL's Truck Pics	Thank god Peter took good care of me though!!! __________________ 02 2500 4x4 6spd t-bars ddp 240s FBDs2monster44 scottyair Htt 66/13/ss htt man fass 150 6in miters water meth smarty/REVO oringed studs spearco sbc dd 20s 35in mudgrapplers 220k

02-08-2008, 04:35 PM	#12 (permalink)
kuntryboy369 Newbie Join Date: Feb 2008 Location: Seneca, SC Posts: 18 kuntryboy369's Truck Pics	hey man, what SBC did you get? after what i read on their web page, and seeing what your saying about them im sold! i know i want one, i just dont know how much is too much. oh i have an '02 2500, 5 speed, 5'' silverline, fass 95 and edge comp. box, (with some big dreams down the road.) ANY insite would be awsome! __________________ '02, 2WD, 2500, Edge comp. box, 5'' Silverline exhaust, Fass fuel system and big line kit. (for now)