Charleston Dyno Day... who's going?

madhat · 10-21-2009, 11:58 PM

Please post only if you're going or trying to go... there is another thread with a discussion going...

I'm in unless I'm dead or my truck is on fire.

I have talked to 4-5 guys that have given me a favorable impression about wanting to come. Hopefully, I'll have at least 2 other guys come up with me.

The list...

1. madhat

__________________
04.5 3500 4x4 SRW, HTT 64/71/16ss, F1 2.5, ARP studs, Arson II, Snow III W/M, Smarty PoD, MP8, AD 150, ATS stage 4 w/output 868/1778 12.46@109

**95Cummins12Valve** · 10-22-2009, 12:11 AM

I'm seriously considering coming down for it. I need to come visit some family so I can kill 2 birds with one stone as they say. Plus I wanna meet some of the low country folks.

__________________
South Carolina Chapter Co-President
'95 2500 5-spd, SLT CC LB
Sponsored By GEORGIA DIESEL
Carolina Cummins Club

jatuggle · 10-22-2009, 11:22 AM

i'm going to be there. i just don't know what i'm going to be in. if the guy that offered me some money for my 97 then i'll have it (hopefully i can find somebody to help get my timing advanced), but if he does come through then i'll have something a little different and some more power

**carolinarednek** · 10-22-2009, 03:01 PM

I'll be there for the meet and greet as well, just wont be hitting the rollers. Always nice to meet fellow Cummins enthusiasts!!

__________________
1996 Dually 4x4, 315/75R16 BFG KM2's, auto with Goerend Triple Disc, BD valve body ,torque-lok and pressure lok, banks twin ram, no plate, 4K GSK, Delivery Valves Clocked, No AFC Foot, BHAF, 6" miters
South Carolina Chapter Co-President

Carolina Cummins Club

Got Torque · 10-24-2009, 12:04 AM

I'll be there. John is trying to get an oyster roast going at the same time. So good fun plus the dyno.

Come on down fellas, the shop will be open by 7a.m and the fun begining with who ever wants to be first. Takes David and Mike a few minutes to get setup. John said he talked to Jeff Garmon, he may even come up for it as well. We'll see. So come on fellas lets have some fun.

__________________
05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!

10-21-2009, 11:58 PM	#1 (permalink)
madhat Cummins Fanatic Join Date: Jan 2008 Location: Beaufort, SC Posts: 177 Thanks: 5 Thanked 4 Times in 4 Posts madhat's Truck Pics	Charleston Dyno Day... who's going? Please post only if you're going or trying to go... there is another thread with a discussion going... I'm in unless I'm dead or my truck is on fire. I have talked to 4-5 guys that have given me a favorable impression about wanting to come. Hopefully, I'll have at least 2 other guys come up with me. The list... 1. madhat __________________ 04.5 3500 4x4 SRW, HTT 64/71/16ss, F1 2.5, ARP studs, Arson II, Snow III W/M, Smarty PoD, MP8, AD 150, ATS stage 4 w/output 868/1778 12.46@109

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-22-2009, 12:11 AM	#2 (permalink)
95Cummins12Valve SC Chapter Co-President Join Date: Jul 2007 Location: Clemson Posts: 936 Thanks: 3 Thanked 0 Times in 0 Posts 95Cummins12Valve's Truck Pics	I'm seriously considering coming down for it. I need to come visit some family so I can kill 2 birds with one stone as they say. Plus I wanna meet some of the low country folks. __________________ South Carolina Chapter Co-President '95 2500 5-spd, SLT CC LB Sponsored By GEORGIA DIESEL Carolina Cummins Club

10-22-2009, 11:22 AM	#3 (permalink)
jatuggle Newbie Join Date: Jan 2009 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts jatuggle's Truck Pics	i'm going to be there. i just don't know what i'm going to be in. if the guy that offered me some money for my 97 then i'll have it (hopefully i can find somebody to help get my timing advanced), but if he does come through then i'll have something a little different and some more power

10-22-2009, 03:01 PM	#4 (permalink)
carolinarednek SC Chapter Co-President Join Date: Jun 2007 Location: Liberty, S.C. Posts: 1,099 Thanks: 1 Thanked 3 Times in 3 Posts carolinarednek's Truck Pics	I'll be there for the meet and greet as well, just wont be hitting the rollers. Always nice to meet fellow Cummins enthusiasts!! __________________ 1996 Dually 4x4, 315/75R16 BFG KM2's, auto with Goerend Triple Disc, BD valve body ,torque-lok and pressure lok, banks twin ram, no plate, 4K GSK, Delivery Valves Clocked, No AFC Foot, BHAF, 6" miters South Carolina Chapter Co-President Carolina Cummins Club

10-24-2009, 12:04 AM	#5 (permalink)
Got Torque Diesel Freak Join Date: Oct 2008 Location: South Carolina Posts: 523 Thanks: 3 Thanked 11 Times in 10 Posts Got Torque's Truck Pics	I'll be there. John is trying to get an oyster roast going at the same time. So good fun plus the dyno. Come on down fellas, the shop will be open by 7a.m and the fun begining with who ever wants to be first. Takes David and Mike a few minutes to get setup. John said he talked to Jeff Garmon, he may even come up for it as well. We'll see. So come on fellas lets have some fun. __________________ 05CTD NV5600 scary larry, TST r49,62/12-s480, head studs, ATS twin CP3's, F1 flux2, air dog 150 BD cooler, Con FE, Hamilton cam, 110#springs, 6in lift, Glacier Diesel ladder bars, 5in stacks.689hp 1317tq on Dunbars dyno, Just hit 701!!