Truck Pulls

[smoke19d]

Originally Posted by dieseldoll7

i'm sorry but i'm not sure i understand your question..

July 26 - Lebanon Area Fair Truck Pull - 7:00 pm
4x4 Truck Classes:
Street Legal Gas 6,500 lbs.
Street Legal Diesel 8,300 lbs.
Pro Stock Gas Big Block 6,500 lbs.
Pro Stock Gas Small Block 6,500 lbs.
Pro Stock Diesel 8,300 lbs.
Modified Gas 6,800 lbs.
Street Legal Semi 20,000 lbs.
No pre-registration. Arrive at least one hour before event to register.


that's the information for this saturday's pull at Lebanon.. did that clarify anything? if not, let me know. i'm happy to help =]

The East Coast Diesel guy's (Ladell and Lamar) pull under Pro Stock Diesel 8,300 lbs

thanks, that's actually exactly what i was looking for

__________________
2005 Patriot Blue, QC, SB. 4X4 NV5600, Valair FE Clutch, HTT 62/71/13ss, SMARTY TNT w/Pod, FASS HPFP, Hmilton Springs Willy's Whistler intake, Quad boost fooler, Issipro triple pillar guage cluster, Dual 7" Miter Cut Stacks. 2" Leveling kit w/ BFG 315'S

[Pro Metal Shop]

Yup thats up there Bull , I go by there on my way to Herkemer .

__________________
Thanks Steve
Steve's Pro Metal Shop
http://www.cumminsforum.com/forum/pennsylvania/
Pennsylvania Chapter Vice President
Patriot Blue 04.5 6spd 4dr crew cab Silverline 4" Smarty S-06. AirAid Silencer MIA

[ohyeahfriday]

Originally Posted by bulldogbones

I live in lowville ny. north of syracuse by 1.5hrs or if you know were watertown is im 30 min east of that.


Side note just beat my personal record for miles put on my butt during a work week. 1,730 in 4 days and I got 30 hrs of work done also.

That is some serious mileage 2 other pulls I know of in northern PA are the Wayne county pulls in Honesdale, PA and the Hartford(sp) pulls just off 81, which aren't too far from the NY PA border if that helps...

I will be up in your neck of the woods in a few weeks. We have been coming up there the last couple years for the watercross races at the Flat Rock Inn. BEAUTIFUL country up there...

__________________
2004.5 Ram 2500 CTD QC 6 spd. K&N Intake with Amsoil Nano+Outerwear, leveled, SmaRtY/Puck stack, BD Short Shift, Isspro boost/pyro/FP overhead, Quad RP Gauge and Boost Fooler, DSS, Thuren stabilizer, 5100's all 'round more to come...

---

Last edited by ohyeahfriday : 07-24-2008 at 08:57 PM.

[dieseldoll7]

Originally Posted by smoke19d

thanks, that's actually exactly what i was looking for

haha. great!

bull, i'm still looking for you..
goin talk to the boys sometime tonight, or possibly tomorrow! but i'll defintely let you know something..

__________________
06 5.9L dually, 6-speed, black, afe air filter, STACKS - 5 inch miters, 3 PINK a-pillar guages, smarty
www.myspace.com/beat_the_clock

[bulldogbones]

Originally Posted by ohyeahfriday

That is some serious mileage 2 other pulls I know of in northern PA are the Wayne county pulls in Honesdale, PA and the Hartford(sp) pulls just off 81, which aren't too far from the NY PA border if that helps...

I will be up in your neck of the woods in a few weeks. We have been coming up there the last couple years for the watercross races at the Flat Rock Inn. BEAUTIFUL country up there...

Flatt is basically my back yard. its a small world. Do you race or just watch.

__________________
06 SLT Big Horn 5.9 6spd 4" straight pipe all the way 305/70/17 Nitto Terragrappler's 1" lift front 2" in the rear about 40 Aftermarket lights

[ohyeahfriday]

We just watch, can't afford another expensive hobby We would usually go out tooling around in trucks, check out the windmills, the gorge, etc. but I think this year we will be bringing up quads and doing some riding around instead. The inlaws are up there every winter snowmobiling, that is how we got hooked on the watercross.

Let me know if you want to try out the Predator of Smarty while I am in the neighborhood, might even sell you the predator I am kind of intrigued to see ~ 40 aftermarket lights

__________________
2004.5 Ram 2500 CTD QC 6 spd. K&N Intake with Amsoil Nano+Outerwear, leveled, SmaRtY/Puck stack, BD Short Shift, Isspro boost/pyro/FP overhead, Quad RP Gauge and Boost Fooler, DSS, Thuren stabilizer, 5100's all 'round more to come...

---

Last edited by ohyeahfriday : 07-25-2008 at 06:15 AM.

[bulldogbones]

Originally Posted by ohyeahfriday

We just watch, can't afford another expensive hobby We would usually go out tooling around in trucks, check out the windmills, the gorge, etc. but I think this year we will be bringing up quads and doing some riding around instead. The inlaws are up there every winter snowmobiling, that is how we got hooked on the watercross.

Let me know if you want to try out the Predator of Smarty while I am in the neighborhood, might even sell you the predator I am kind of intrigued to see ~ 40 aftermarket lights

I worked on the windmills when they were going up. Man that was fun 300' in the air with the wind whippin trying to get the blads bolted up and you hear the crane operator say over the radio hold on here it comes. So you grab somthing and try to stay standing up and it comes at you and at the same time you trying to line the stupid thing up. LOL that was one of my top 10 arial rush's the guys on the ground said they could see the entire tower swaying after. About that predator is that for you 04.5 and if it is will it mate up to my 06. I checked predator's website and they offer one for 03-05 and 06-07.

__________________
06 SLT Big Horn 5.9 6spd 4" straight pipe all the way 305/70/17 Nitto Terragrappler's 1" lift front 2" in the rear about 40 Aftermarket lights

[ohyeahfriday]

taking this to PM, kinda stealin' the thread here...

__________________
2004.5 Ram 2500 CTD QC 6 spd. K&N Intake with Amsoil Nano+Outerwear, leveled, SmaRtY/Puck stack, BD Short Shift, Isspro boost/pyro/FP overhead, Quad RP Gauge and Boost Fooler, DSS, Thuren stabilizer, 5100's all 'round more to come...

[Pro Metal Shop]

No problem Ohyeah Hey its count down time who's goin we can get a meeting spot??

__________________
Thanks Steve
Steve's Pro Metal Shop
http://www.cumminsforum.com/forum/pennsylvania/
Pennsylvania Chapter Vice President
Patriot Blue 04.5 6spd 4dr crew cab Silverline 4" Smarty S-06. AirAid Silencer MIA

[Pro Metal Shop]

For those who mist the pulls I will post some photo's. Not great ones I used my wifes camara and although there therre same I have mine set ti (IDIOT) proof.
My wife took on of theoseh there driving classes to better opperate the OH CR@P settings, and I was having a bit of an issue .
Back to the pulls, I didn't get to see deisel that I know of , but well worth the trip. I had a hard time getting out of the parking lot, there more Cummins with stacks than I had room on the camara card for. I will start another thread with the photo's after I get them loaded... AHHH if they turned out

__________________
Thanks Steve
Steve's Pro Metal Shop
http://www.cumminsforum.com/forum/pennsylvania/
Pennsylvania Chapter Vice President
Patriot Blue 04.5 6spd 4dr crew cab Silverline 4" Smarty S-06. AirAid Silencer MIA

[white99]

what i got to look at on the way to lebanon fair saterday night

sorry its the only pic i took all day but how can i take pics of my truck while im drving? haha

__________________
rebuilt trans2X,BDtc 315/75/16 procomps 2"spacer traction bars..bent n trashed-D80 Diff rebuilt.truck in shop for the 4TH TIME.trans likes to break..400/800 as of Fall Brawl truck went to hell since then..musta got bit by big blue...

[dieseldoll7]

Originally Posted by white99

what i got to look at on the way to lebanon fair saterday night

sorry its the only pic i took all day but how can i take pics of my truck while im drving? haha

haha. i was at the lebanon fair!! and i got to "officially" meet you.

you could have taken a picture with me. what the heck. haha, just kidding. next time, we'll defintley take tons of pictures..

__________________
06 5.9L dually, 6-speed, black, afe air filter, STACKS - 5 inch miters, 3 PINK a-pillar guages, smarty
www.myspace.com/beat_the_clock