o-ring cost?

pullin the hard way · 03-11-2007, 12:17 PM

any one know who can do o-ringing here in central ontario. I know you can answer this graphic man how much did hot rod charge?

__________________
1995 laramie slt 4x4 auto, 1991 4wd no i/c 5spd locked diffs pump tweaked centreforce df clutch 5" stacks modified suspension, 1992 2wd auto w/od pump tweaked, POD's, 60# valve springs, 366 gov spring, 4" dp to 5" side pipes 230hp 590#tq 05/19/08

underpsi · 03-12-2007, 10:25 AM

I paid about $350 CDN for mine

__________________
1989 D250 5spd, Hurst shifter, 20in Eagle Alloys, .020 over head gasket, O-rings, Extensive port/polish, ARP head studs, 16cm housing, PODs, Pump turned up, AFC lever delete, Stock exh straight piped, AFE Mega cannon filter, Isspro EV series Pyro, Boost, and Fuel Pressure.

Graphic Man · 03-12-2007, 12:05 PM

call Heath at hot rod diesel......i think it was $350-400,......you will have to pull the head yourself or you can get him to do it.....he will also check it for straightness and O-ring it in house.....Heath is a good guy to deal with

Your Diesel Performance Source

Scott

__________________
2001 4X4 Q-cab Sport black, full billet DTT trans, billet F-plate Mach 7's, B1-B2 twins, Blue Chip Special X VP, Adrenaline, studded & O-ringed, BD-RAD,Flex-A-Lite electric fans, Autometer Gages, Egt, Boost,Fuel, Oil &,drive pressure, trans temp, RASP, Big line kit, Track bars 2" leveling kit, 271 T-case, DSS, 3rd gen trac bar 623 HP 1175tq with old set-up

03-11-2007, 12:17 PM	#1 (permalink)
pullin the hard way Cummins Fan Join Date: Dec 2006 Posts: 45 pullin the hard way's Truck Pics	o-ring cost? any one know who can do o-ringing here in central ontario. I know you can answer this graphic man how much did hot rod charge? __________________ 1995 laramie slt 4x4 auto, 1991 4wd no i/c 5spd locked diffs pump tweaked centreforce df clutch 5" stacks modified suspension, 1992 2wd auto w/od pump tweaked, POD's, 60# valve springs, 366 gov spring, 4" dp to 5" side pipes 230hp 590#tq 05/19/08

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

03-12-2007, 10:25 AM	#2 (permalink)
underpsi Cummins Fanatic Join Date: Dec 2005 Location: Toronto, Canada Posts: 167 underpsi's Truck Pics	I paid about $350 CDN for mine __________________ 1989 D250 5spd, Hurst shifter, 20in Eagle Alloys, .020 over head gasket, O-rings, Extensive port/polish, ARP head studs, 16cm housing, PODs, Pump turned up, AFC lever delete, Stock exh straight piped, AFE Mega cannon filter, Isspro EV series Pyro, Boost, and Fuel Pressure.

03-12-2007, 12:05 PM	#3 (permalink)
Graphic Man Administrator Join Date: Nov 2005 Location: Mississauga ont. Canada Posts: 6,984 Graphic Man's Truck Pics	call Heath at hot rod diesel......i think it was $350-400,......you will have to pull the head yourself or you can get him to do it.....he will also check it for straightness and O-ring it in house.....Heath is a good guy to deal with Your Diesel Performance Source Scott __________________ 2001 4X4 Q-cab Sport black, full billet DTT trans, billet F-plate Mach 7's, B1-B2 twins, Blue Chip Special X VP, Adrenaline, studded & O-ringed, BD-RAD,Flex-A-Lite electric fans, Autometer Gages, Egt, Boost,Fuel, Oil &,drive pressure, trans temp, RASP, Big line kit, Track bars 2" leveling kit, 271 T-case, DSS, 3rd gen trac bar 623 HP 1175tq with old set-up