Dyno Day @ "National Speed" in Wilmington, N.C.

[John_P]

I wanted to invite all of the CF N.C. Members to a Dyno Day to be held this coming Saturday November 21st, 2009 @ "National Speed" located at 6779 Gordon Road, Wilmington, N.C. (910) 332-5901. The event will start at 11:00 A.M. and run to about 4:00 P.M. with doors opening at 10:00 A.M.

The cost of the dyno runs will be fifty ($50.00) for three (3)
runs which is a very good rate. I want to thank the Owner George Taylor and Bobby Downes for the invitation to this event. Food will be served by "National Speed" and they are also having a "Silent Auction" that day for many competition speed parts for those interested. I will be there and have asked Lucas Underwood to join us also.

Here is a link to "National Speed" and the event:

National Speed, Inc. A new breed of automotive performance shop.

Hope to see some of you there!

---------
John_P

__________________
1996 Dodge CTD, Ext. Cab.,LB, 4X4, 2500, Scheid Built engine

---

Last edited by John_P : 11-16-2009 at 11:59 AM.

[lrw_cummins]

Originally Posted by John_P

I wanted to invite all of the CF N.C. Members to a Dyno Day to be held this coming Saturday November 21st, 2009 @ "National Speed" located at 6779 Gordon Road, Wilmington, N.C. (910) 332-5901. The event will start at 11:00 A.M. and run to about 4:00 P.M. with doors opening at 10:00 A.M.

The cost of the dyno runs will be fifty ($50.00) for three (3)
runs which is a very good rate. I want to thank the Owner George Taylor and Bobby Downes for the invitation to this event. Food will be served by "National Speed" and they are also having a "Silent Auction" that day for many competition speed parts for those interested. I will be there and have asked Lucas Underwood to join us also.

Here is a link to "National Speed" and the event:

National Speed, Inc. A new breed of automotive performance shop.

Hope to see some of you there!

---------
John_P

Sweet I hope there is going to be a great turn out. I want to run my truck to see what kind of numbers I lay down.

__________________
08 2500 QC SB AT 4X4 W/ BANKS INTERCOOLER & INTAKE, WCC AIRHORN, EGR COOLER DELETE, 5" TBE TO 6" DUAL MITRE STACKS, BLACK MAXX, BMK-21, AND FUEL UPGRADES TO COME LATER.......DYNO'D at National Speed 414 RWHP and 778 RWTQ

[John_P]

Originally Posted by lrw_cummins

Sweet I hope there is going to be a great turn out. I want to run my truck to see what kind of numbers I lay down.

----------------------------------
lrw_cummins:

Thanks for posting up here and also for your P.M. it is good to hear from you.

I really thought more of the CF N.C. Members would have posted up here on this event. "National Speed" is a "state-of-the art" facility with a great Staff.
They will be providing lunch and their "Speed Girls" will also be on hand. They are also having a "silent auction" of many of their most popular speed/performance parts that day.

I hope more of the N.C. Members can make it.

--------
John_P

__________________
1996 Dodge CTD, Ext. Cab.,LB, 4X4, 2500, Scheid Built engine

[bigbrowngoat]

would like to come but I already have other plans, maybe if they do it again in the early sping like end of March or first of April maybe I could make it down. but thanks for the invit.

__________________
01 Goat QC 4X4 some extra parts just not to many.

[farmboysdiesel]

I'm actually leaving this morning headed that way to pick up a truck for an engine build. Hope you guys have a good turn out.

__________________

Best Price, Best Service Guaranteed
704-290-2289
Order online 24/7 @ www.farmboysdiesel.com

[willaduncan]

i might be there?

__________________
2001 Ram 2500 EDGE HOT Juice w/ Attitude, S&B Cold Air Intake, S&B Intake Elbow, FASS 95, 6" Single Stack, Silencer MIA

[nc_explorer]

to bad im preping the trunk for primer and paint its only 15 min's from the house...

__________________
95 2500 reg cab 2wd 12v 163,000 miles 20k on rebuild trans,star wheel turned,needs paint job, slowly starting...
96 1500 reg cab 2wd 360 auto stock
99 F150 reg cab 2wd V6 5spd stock
97 polaris explorer 500 w/big bore kit

[cumminsfreak86]

I guess that means I'm gonna be the only 1st gen there.

__________________
'91.5 w250 white, getrag tranny, Denny T fuel pin, 90 hp sticks, HX35, 6 in lift w/ deaver springs, 33x12.5 BFG AT's, 3" strait pipe exhaust, and the addition that added the most power...the HURST T_HANDLE shifter knob

[2141pete]

I'll be there in my pile.

__________________

2002 dodge 2500 4x4 24v, 175 pump, 4k GSK, 191 DV's, Mack plug, .093" lines and tubes, HD Cam, twins, 8x.011's, and a few other things