Any Good Shops to do Cam in Southern NV?

LVTony · 10-06-2007, 12:23 PM

As the title asks, are there any good shops to do a cam (and springs) in Southern Nevada, or even S. Utah or S. CA?

I want to get a Helix 2 cam and springs installed so I'll be ready when Smarty raises the RPM limit to 4000.

__________________
Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank
'04 VW NB TDI 5spd

Cumnspwr · 10-06-2007, 03:57 PM

I do all my own work so I don't know of any "good" shops here in town. Might want to call up diesel specialists. They are around craig/pecos just after the 15.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

LVTony · 10-06-2007, 05:31 PM

I figured either Diesel Specialists or J&S, if either of them would do a cam.

Have you towed anything with the HTT 66/14? I would like to be around 600 HP eventually, but I still need to tow, so I figured a 62/14 would be about the largest I could go without surging. Or twins.

__________________
Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank
'04 VW NB TDI 5spd

Cumnspwr · 10-06-2007, 06:14 PM

In o/d anything below 10 psi it surges, surges between shifts(yes in an automatic), slow spooling. It's not a good towing setup, but it is one wicked drag setup. I daily drive my truck and can deal with it...the average person would be miserable.

It also gets hot with the amount of fuel i'm pushing. But that's with a stock cam and intercooler.

If you want big power and still be able to tow, go twins.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

Cumnspwr · 10-06-2007, 06:17 PM

I would go J&S. I deal with them at work, and have gotten a pump from them for my truck. Not sure if they do installations though.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

LVTony · 10-06-2007, 06:59 PM

I'll ask J&S if they do installs. I usually go there to buy Stanadyne anyway.

__________________
Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank
'04 VW NB TDI 5spd

10-06-2007, 12:23 PM	#1 (permalink)
LVTony Cummins Fanatic Join Date: Oct 2007 Location: Las Vegas Posts: 147 LVTony's Truck Pics	Any Good Shops to do Cam in Southern NV? As the title asks, are there any good shops to do a cam (and springs) in Southern Nevada, or even S. Utah or S. CA? I want to get a Helix 2 cam and springs installed so I'll be ready when Smarty raises the RPM limit to 4000. __________________ Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank '04 VW NB TDI 5spd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-06-2007, 03:57 PM	#2 (permalink)
Cumnspwr Smokin Beast Join Date: May 2006 Location: Las Vegas, NV Posts: 2,269 Cumnspwr's Truck Pics	I do all my own work so I don't know of any "good" shops here in town. Might want to call up diesel specialists. They are around craig/pecos just after the 15. Cumnspwr __________________ 2001 2500 4x4 GB Full Billet Auto HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

10-06-2007, 05:31 PM	#3 (permalink)
LVTony Cummins Fanatic Join Date: Oct 2007 Location: Las Vegas Posts: 147 LVTony's Truck Pics	I figured either Diesel Specialists or J&S, if either of them would do a cam. Have you towed anything with the HTT 66/14? I would like to be around 600 HP eventually, but I still need to tow, so I figured a 62/14 would be about the largest I could go without surging. Or twins. __________________ Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank '04 VW NB TDI 5spd

10-06-2007, 06:14 PM	#4 (permalink)
Cumnspwr Smokin Beast Join Date: May 2006 Location: Las Vegas, NV Posts: 2,269 Cumnspwr's Truck Pics	In o/d anything below 10 psi it surges, surges between shifts(yes in an automatic), slow spooling. It's not a good towing setup, but it is one wicked drag setup. I daily drive my truck and can deal with it...the average person would be miserable. It also gets hot with the amount of fuel i'm pushing. But that's with a stock cam and intercooler. If you want big power and still be able to tow, go twins. Cumnspwr __________________ 2001 2500 4x4 GB Full Billet Auto HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

10-06-2007, 06:17 PM	#5 (permalink)
Cumnspwr Smokin Beast Join Date: May 2006 Location: Las Vegas, NV Posts: 2,269 Cumnspwr's Truck Pics	I would go J&S. I deal with them at work, and have gotten a pump from them for my truck. Not sure if they do installations though. Cumnspwr __________________ 2001 2500 4x4 GB Full Billet Auto HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

10-06-2007, 06:59 PM	#6 (permalink)
LVTony Cummins Fanatic Join Date: Oct 2007 Location: Las Vegas Posts: 147 LVTony's Truck Pics	I'll ask J&S if they do installs. I usually go there to buy Stanadyne anyway. __________________ Tony -- '06 2500 CTD QC SLT LB 4x4 Goerend 48RE full billet, Jake, Smarty, Ravelco, Commander+Boost Fooler, Aerotank 75 gal. fuel tank '04 VW NB TDI 5spd