New tire and delete pipe

[Juiced06]

Order my muff delete from Geno's Thursday should be here soon. Any suggestions on getting the muffler. I got under it and removed the clamps to see how hard it would be to get off and it looks like the clamps cinched the pipe. Maybe a sawzall is the answer?????

I also ordered 1 of my new set of tires for the beast 285/60/17

I want it to sit lower with an agressive stance hopefully look like Project X in Diesel Power maybe you guys have seen it

__________________
06 Ram 2500 CTD QC 4x4, drop in K&N, Hot Juice
TCI TC, BD VB, MDP, 285/60/17s

[Cumnspwr]

Cool. Those style clamps usually put crimps in the pipes, making it extremely tough and a PITA to remove or unable to be removed. I usually take a cutting wheel and cut parallel with the pipe to butterfly the pipe and spread it. That will do the trick.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

[Juiced06]

Thanks for the help Neil butterflied like a Jumbo shrimp put the new pipe in and it sounds awesome cant wait for the stacks they should sound even better but gotta save up for those babies

__________________
06 Ram 2500 CTD QC 4x4, drop in K&N, Hot Juice
TCI TC, BD VB, MDP, 285/60/17s

[Cumnspwr]

Sweet! Yeah, I'm starting to want a single 7" stack. I worked on a brand new Pete that had a single 7" tip, perfect length for a stack on my truck. I was tempted.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

[Juiced06]

Got all four tires on the other day they look pretty good much wider than stock =more traction little lower as well

I noticed my rears were to the wear bars when they took them off 17k on my truck, and the fronts were about 75% so much for rotating every 3k, I guess proper rotation would be every other burn out or donut

__________________
06 Ram 2500 CTD QC 4x4, drop in K&N, Hot Juice
TCI TC, BD VB, MDP, 285/60/17s

[Cumnspwr]

Cool, guess we'll see them next weekend. Today was windy at the Lake, did you go? We were in the Pontoon boat so we didn't much feel it.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP

[CumminThru]

Originally Posted by Juiced06

I want it to sit lower with an agressive stance hopefully look like Project X in Diesel Power maybe you guys have seen it

Oh I have seen it , they did a conversion a month or 2 ago to a 1500 series suspension to lower it, Just got Aug issue yesterday and it seemed to have helped some. Thats an awesome truck!!

__________________
Dan - Ontario Cummins Crew President Ontario Chapter
GONE but never forgotten - 2001.5 24V QC SLT Laramie 2wd 47RE/3.55, LB, ICEBOX w/4510, FBD 4" turbo back w 5x18 SS tip, silencer ring MIA, FASS 150, IIS HRVP, DiPricol 30 psi FP guage, 1 qt 2 stroke EVERY tank!! 16.5481 @83.29mph on 7/7/07
My new ride .... for now - 06 JEEP LIBERTY CRD. NO MODS, its a lease...

[Juiced06]

Originally Posted by Cumnspwr

Cool, guess we'll see them next weekend. Today was windy at the Lake, did you go? We were in the Pontoon boat so we didn't much feel it.

Cumnspwr

Yeah I was out there at 7am but did not see your boats, we went left and really didnt see a whole lot of sandy beaches so we anchored off of a small island near a sand bar we rolled out of there at around 1:30 Isaw a few pontoons but none were yellow like you described I'm suprised you didnt see my bright red boat yeah next weekend for sure.

__________________
06 Ram 2500 CTD QC 4x4, drop in K&N, Hot Juice
TCI TC, BD VB, MDP, 285/60/17s

[Cumnspwr]

Sorry, we were out on Sat. not Sunday. The sandy beaches are a ways left.

Cumnspwr

__________________
2001 2500 4x4 GB Full Billet Auto
HTT Prostreet 66/14, 7X.012's, Some headwork, FMS, Smarty, Nitrous, Lots of other stuff! 750+HP