Dyno day planning

**2141pete** · 07-16-2008, 06:51 PM

I got in contact with JMS performance in Lucedale MS. They told me they are setup to do diesel trucks and would be happy to let us hold a state chapter event there. If we can get 8 trucks commited the cost will be $50 for 2 pulls. I am still waiting back on answers for stacks, dually's, and if we get to make our own pull on the rollers or their guys run our trucks. I should hear back on those details tomorrow. So what do you guys think? Are we ready to spread the word and get the Mississippi chapter active and known?

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous
www.farmboysdiesel.com

norwood dodge · 07-16-2008, 07:11 PM

Pete, I would drive from Louisiana to dyno with you and your friends. If I am welcome !!

I want to dyno my truck to get some numbers !!!

__________________
4.5 D3500 auto 4X4, Smarty Jr, Dipricol gauges, muffler & silencer ring MIA,Stage II AFE w/ Amsoil nano-fiber filter, CFM+ and heater delete, Amsoil from end to end, Master Transmissions Silver Bullet HD Trans w/ Billet converter !!

**bkjeffrey** · 07-16-2008, 07:20 PM

cmon Pete, lets get er did!!!

__________________
04 QC/LWB 48RE 4x4 WAAAYYY To much fuel, plenty of air! Propane injection, single stack, 4" SS TB. Need a new tranny! 1875 watts worth of stereo, DVD, Optima blue tops, 5 gal onboard air system, train horns.

**2141pete** · 07-16-2008, 08:09 PM

Quote:

Originally Posted by norwood dodge

Pete, I would drive from Louisiana to dyno with you and your friends. If I am welcome !!

I want to dyno my truck to get some numbers !!!

Anyone who is willing to drive is more than welcome!!!!

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous
www.farmboysdiesel.com

**2141pete** · 07-16-2008, 08:10 PM

Quote:

Originally Posted by bkjeffrey

cmon Pete, lets get er did!!!

Oh yeah

, and a smarty is on the way so I dont leave the track so upset next time.

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous
www.farmboysdiesel.com

**bkjeffrey** · 07-16-2008, 08:19 PM

Good deal bud......I still think I want one. While your playing with the Smarty I'd be happy to babysit that bike of yours...........

Just kiddin.

__________________
04 QC/LWB 48RE 4x4 WAAAYYY To much fuel, plenty of air! Propane injection, single stack, 4" SS TB. Need a new tranny! 1875 watts worth of stereo, DVD, Optima blue tops, 5 gal onboard air system, train horns.

Last edited by bkjeffrey : 07-16-2008 at 08:21 PM.

6Cummins · 07-16-2008, 08:53 PM

OH HELL YA!! I got some goodies waiting to be installed and some still on the way!!

Wait for me to install it all before we go haha

I got a buddy from Alabama that is about to build a trans. I know he would go once thats done! And I know mike will go.

So that would be. ME, Mike, Johnathan, Pete, Jeff, Dude from LA ha, and who else? But like I said above. Gotta wait for my goodies and johnathan to build his trans really soon

__________________
04 4dr 4wd Silver, Little bit of this and that..

Last edited by 6Cummins : 07-16-2008 at 08:55 PM.

6Cummins · 07-16-2008, 08:54 PM

Quote:

Originally Posted by 2141pete

Oh yeah

, and a smarty is on the way so I dont leave the track so upset next time.

Sawweet.. Lets go to the track again so you can get that 60ft down like you need it to be!! Let me know when

__________________
04 4dr 4wd Silver, Little bit of this and that..

6Cummins · 07-16-2008, 08:56 PM

Quote:

Originally Posted by 2141pete

I got in contact with JMS performance in Lucedale MS. They told me they are setup to do diesel trucks and would be happy to let us hold a state chapter event there. If we can get 8 trucks commited the cost will be $50 for 2 pulls. I am still waiting back on answers for stacks, dually's, and if we get to make our own pull on the rollers or their guys run our trucks. I should hear back on those details tomorrow. So what do you guys think? Are we ready to spread the word and get the Mississippi chapter active and known?

They got a big garage door on the dyno shop. Hell lets smoke that thing out haha

__________________
04 4dr 4wd Silver, Little bit of this and that..

norwood dodge · 07-17-2008, 06:28 AM

Please let me know when and where !! I am ready !!

__________________
4.5 D3500 auto 4X4, Smarty Jr, Dipricol gauges, muffler & silencer ring MIA,Stage II AFE w/ Amsoil nano-fiber filter, CFM+ and heater delete, Amsoil from end to end, Master Transmissions Silver Bullet HD Trans w/ Billet converter !!

**2141pete** · 07-17-2008, 02:47 PM

I heard back from them today. If we wait till they get their mustang dyno in they can do duallies but if not they will have to pull the outers. They said stacks are good to go, they must not know yet lol. And they will run the trucks we cant. Right now they have a dynojet wich I like better but either will work. We will need to start planning sometime but we should leave plenty of time to get it together. I will look at my schedule and see what weekend the reservist's are coming in to drill because I cant get out of those. Everybody else make sure and post up some dates that are a no so we can work around them.

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous
www.farmboysdiesel.com

pyrobee · 07-17-2008, 02:56 PM

well I was thinking more the end of august...

__________________
99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete

07-16-2008, 06:51 PM	#1 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 1,847 2141pete's Truck Pics	Dyno day planning I got in contact with JMS performance in Lucedale MS. They told me they are setup to do diesel trucks and would be happy to let us hold a state chapter event there. If we can get 8 trucks commited the cost will be $50 for 2 pulls. I am still waiting back on answers for stacks, dually's, and if we get to make our own pull on the rollers or their guys run our trucks. I should hear back on those details tomorrow. So what do you guys think? Are we ready to spread the word and get the Mississippi chapter active and known? __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous www.farmboysdiesel.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

07-16-2008, 07:11 PM	#2 (permalink)
norwood dodge Cummins Enthusiast Join Date: Mar 2008 Location: louisiana Posts: 218 norwood dodge's Truck Pics	Pete, I would drive from Louisiana to dyno with you and your friends. If I am welcome !! I want to dyno my truck to get some numbers !!! __________________ 4.5 D3500 auto 4X4, Smarty Jr, Dipricol gauges, muffler & silencer ring MIA,Stage II AFE w/ Amsoil nano-fiber filter, CFM+ and heater delete, Amsoil from end to end, Master Transmissions Silver Bullet HD Trans w/ Billet converter !!

07-16-2008, 07:20 PM	#3 (permalink)
bkjeffrey MS Chapter VP Join Date: Mar 2008 Location: Mississippi Gulf Coast Posts: 254 bkjeffrey's Truck Pics	cmon Pete, lets get er did!!! __________________ 04 QC/LWB 48RE 4x4 WAAAYYY To much fuel, plenty of air! Propane injection, single stack, 4" SS TB. Need a new tranny! 1875 watts worth of stereo, DVD, Optima blue tops, 5 gal onboard air system, train horns.

07-16-2008, 08:19 PM	#6 (permalink)
bkjeffrey MS Chapter VP Join Date: Mar 2008 Location: Mississippi Gulf Coast Posts: 254 bkjeffrey's Truck Pics	Good deal bud......I still think I want one. While your playing with the Smarty I'd be happy to babysit that bike of yours........... Just kiddin. __________________ 04 QC/LWB 48RE 4x4 WAAAYYY To much fuel, plenty of air! Propane injection, single stack, 4" SS TB. Need a new tranny! 1875 watts worth of stereo, DVD, Optima blue tops, 5 gal onboard air system, train horns. Last edited by bkjeffrey : 07-16-2008 at 08:21 PM.

07-16-2008, 08:53 PM	#7 (permalink)
6Cummins Diesel Freak Join Date: May 2007 Location: Ocean Springs, Mississippi Posts: 714 6Cummins's Truck Pics	OH HELL YA!! I got some goodies waiting to be installed and some still on the way!! Wait for me to install it all before we go haha I got a buddy from Alabama that is about to build a trans. I know he would go once thats done! And I know mike will go. So that would be. ME, Mike, Johnathan, Pete, Jeff, Dude from LA ha, and who else? But like I said above. Gotta wait for my goodies and johnathan to build his trans really soon __________________ 04 4dr 4wd Silver, Little bit of this and that.. Last edited by 6Cummins : 07-16-2008 at 08:55 PM.

07-17-2008, 06:28 AM	#10 (permalink)
norwood dodge Cummins Enthusiast Join Date: Mar 2008 Location: louisiana Posts: 218 norwood dodge's Truck Pics	Please let me know when and where !! I am ready !! __________________ 4.5 D3500 auto 4X4, Smarty Jr, Dipricol gauges, muffler & silencer ring MIA,Stage II AFE w/ Amsoil nano-fiber filter, CFM+ and heater delete, Amsoil from end to end, Master Transmissions Silver Bullet HD Trans w/ Billet converter !!

07-17-2008, 02:47 PM	#11 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 1,847 2141pete's Truck Pics	I heard back from them today. If we wait till they get their mustang dyno in they can do duallies but if not they will have to pull the outers. They said stacks are good to go, they must not know yet lol. And they will run the trucks we cant. Right now they have a dynojet wich I like better but either will work. We will need to start planning sometime but we should leave plenty of time to get it together. I will look at my schedule and see what weekend the reservist's are coming in to drill because I cant get out of those. Everybody else make sure and post up some dates that are a no so we can work around them. __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, a small shot of nitrous www.farmboysdiesel.com

07-17-2008, 02:56 PM	#12 (permalink)
pyrobee Cummins Fanatic Join Date: Oct 2007 Posts: 147 pyrobee's Truck Pics	well I was thinking more the end of august... __________________ 99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete