Who is our president?

**2141pete** · 07-11-2008, 08:41 PM

I was just wondering if we have a chapter setup with a president and a VP and stuff to get some stuff going?

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous
12.71@104 #2 only

6Cummins · 07-11-2008, 09:33 PM

we have one of those??

__________________
04 4dr 4wd Silver, Little bit of this and that..

pyrobee · 07-13-2008, 06:17 AM

Yeah if there is nothing going we should get something going!

__________________
99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete

**2141pete** · 07-13-2008, 07:34 AM

No one else out there interested in getting anything going huh? I guess we can do it on our own then?

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous
12.71@104 #2 only

HOLYSMOKES · 07-13-2008, 08:01 AM

NOBAMA!

__________________
Thank you New Era Diesel for the Cummins upgrades!
Thanks www.runnadm

**2141pete** · 07-13-2008, 01:19 PM

Quote:

Originally Posted by HOLYSMOKES

NOBAMA!

HAHAHA there's the first nominee for our Ms chapter.

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous
12.71@104 #2 only

pyrobee · 07-14-2008, 10:35 AM

2nd the motion....lmao

__________________
99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete

BBRam · 07-14-2008, 10:40 AM

To my knowledge, you don't have a Prez or VP. Run with it Pete.

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3.5 CP3, F1 Flux 3.8's, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GR 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

**2141pete** · 07-14-2008, 10:41 AM

Who me? who would want to have a jack A$$ like me as the prez?

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous
12.71@104 #2 only

BBRam · 07-14-2008, 10:42 AM

Quote:

Originally Posted by 2141pete

Who me? who would want to have a jack A$$ like me as the prez?

That being said, your hired!

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3.5 CP3, F1 Flux 3.8's, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GR 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

**2141pete** · 07-14-2008, 10:44 AM

shouldnt we have a poll to vote on it or something?

__________________

02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous
12.71@104 #2 only

BBRam · 07-14-2008, 10:45 AM

Quote:

Originally Posted by 2141pete

shouldnt we have a poll to vote on it or something?

You can do that as well.

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3.5 CP3, F1 Flux 3.8's, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GR 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

07-11-2008, 08:41 PM	#1 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 2,144 2141pete's Truck Pics	Who is our president? I was just wondering if we have a chapter setup with a president and a VP and stuff to get some stuff going? __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous 12.71@104 #2 only

07-14-2008, 10:35 AM	#7 (permalink)
pyrobee Cummins Fanatic Join Date: Oct 2007 Posts: 170 pyrobee's Truck Pics	nobama 2nd the motion....lmao __________________ 99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

07-11-2008, 09:33 PM	#2 (permalink)
6Cummins Diesel Freak Join Date: May 2007 Location: Ocean Springs, Mississippi Posts: 714 6Cummins's Truck Pics	we have one of those?? __________________ 04 4dr 4wd Silver, Little bit of this and that..

07-13-2008, 06:17 AM	#3 (permalink)
pyrobee Cummins Fanatic Join Date: Oct 2007 Posts: 170 pyrobee's Truck Pics	Yeah if there is nothing going we should get something going! __________________ 99 2wd AEM Brute Force Intake, Full Pillar:EGT, Boost, Fuel Pressure, Silencer Ring MIA, Muffler Delete

07-13-2008, 07:34 AM	#4 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 2,144 2141pete's Truck Pics	No one else out there interested in getting anything going huh? I guess we can do it on our own then? __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous 12.71@104 #2 only

07-13-2008, 08:01 AM	#5 (permalink)
HOLYSMOKES Diesel Head Join Date: Nov 2005 Location: Thornville, Ohio Posts: 2,306 HOLYSMOKES's Truck Pics	NOBAMA! __________________ Thank you New Era Diesel for the Cummins upgrades! Thanks www.runnadm

07-14-2008, 10:40 AM	#8 (permalink)
BBRam Super Administrator Join Date: Jan 2006 Location: Chelsea MI Posts: 15,010 BBRam's Truck Pics	To my knowledge, you don't have a Prez or VP. Run with it Pete. __________________ 03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3.5 CP3, F1 Flux 3.8's, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GR 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

07-14-2008, 10:41 AM	#9 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 2,144 2141pete's Truck Pics	Who me? who would want to have a jack A$$ like me as the prez? __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous 12.71@104 #2 only

07-14-2008, 10:44 AM	#11 (permalink)
2141pete MS Chapter President Join Date: Oct 2006 Location: Gulfport, MS Posts: 2,144 2141pete's Truck Pics	shouldnt we have a poll to vote on it or something? __________________ 02 QC,4x4,TRE auto,AD150,BD twins, Mach5's,F1 springs,o-rings, studs,Quad ADR,smarty, Stewart warner gauges, a small shot of nitrous 12.71@104 #2 only