Trans Install

[pro99]

Originally Posted by unixcowboy

Please, take your time...
Couple of things have come up and I won't be able to get over to your place until ~ 20th at the earliest.
The deep pan came in but haven't had time to check around for a filter extension.

OK sounds good hope every things OK there tho

__________________
Charles Estep

[Evil Twin]

Originally Posted by unixcowboy

Please, take your time...
Couple of things have come up and I won't be able to get over to your place until ~ 20th at the earliest.
The deep pan came in but haven't had time to check around for a filter extension.

for gods sake don't rush him.....he rushed on mine and i had 4 speeds rev and 1 forward

__________________
2001 4X4 Q-cab Sport black, full billet DTT trans, billet F-plate Mach 7's, B1-B2 twins, Blue Chip Special X VP, Adrenaline, studded & O-ringed, BD-RAD,Flex-A-Lite electric fans, Autometer Gages, Egt, Boost,Fuel, Oil &,drive pressure, trans temp, RASP, Big line kit, Track bars 2" leveling kit, 271 T-case, DSS, 3rd gen trac bar 623 HP 1175tq with old set-up

[pro99]

Originally Posted by Graphic Man

for gods sake don't rush him.....he rushed on mine and i had 4 speeds rev and 1 forward

Your lucky you got them

__________________
Charles Estep

[BBRam]

Originally Posted by barracuda_440

I can work late its not a problem. Give me a call and we will go from there!

Well, Is it done yet?

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[Diesel_Nuts]

: WELL!!

__________________
07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come.... DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

[unixcowboy]

Come on !!!
Don't rush him ( it's only been 3 weeks )

__________________
'93 D250 CC auto, 18.5cm w/30 psi - 32 psi w/TC locked, 366 spring w/1 turn clipped, power screw bottomed - backed off 1 turn, modified Ol Smokey's power pin, smoke screw fully out, hat modified to get pin higher - still smokes, '94 trans w/clutches and some hard parts, 4510 w/4 1/2" intake and heat shield, grid htrs mia, 4" dp into 5" pipe to single 5" stack, 285's rear 265's front

[BBRam]

Wake Up Chaz !!!!!!!!!!!

__________________
03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[pro99]

Originally Posted by BBRam

Wake Up Chaz !!!!!!!!!!!

__________________
Charles Estep

[jackblack99]

pro99 your name is chaz?

__________________
99 3500 sport, 9 in lift and 17' KMC Rockstars and 37" Cooper STT's. Edge Comp, BHAF, Airdog 150, autometer ultralite 2's, 4in turbo back(home made) to 7in miter cut, home made traction bars........coming soon ....Scheid Lightning 2's and a built trans when i get my quad sold.

[pro99]

Originally Posted by jackblack99

pro99 your name is chaz?

Yes why is that a bad thing But its just a nickname and short for Charles

__________________
Charles Estep

[jackblack99]

not a bad thing. i just dont hear of people with my name very often.

__________________
99 3500 sport, 9 in lift and 17' KMC Rockstars and 37" Cooper STT's. Edge Comp, BHAF, Airdog 150, autometer ultralite 2's, 4in turbo back(home made) to 7in miter cut, home made traction bars........coming soon ....Scheid Lightning 2's and a built trans when i get my quad sold.

[pro99]

Originally Posted by jackblack99

not a bad thing. i just dont hear of people with my name very often.

Good now I can start putting all this bad stuff off on you

That Chaz..... wasn't me it was the other Chaz

__________________
Charles Estep