Monroe/West Monroe

pharmD_08 · 06-28-2008, 05:40 PM

Hey, I am looking to add on some upgrades to my truck, but don't have the tools or the time to do the job. So... does anyone know of a decent diesel shop in Monroe???
thanks

__________________
00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

***cumminator*** · 06-30-2008, 09:13 PM

what exactly are you wanting to do?....i dont believe there are many, if any shops in monroe. but sure with that town being that big there will be someone..ill try to find something out.

__________________
2003 black 3500drw 4x4 laramie, 6speed,5in exhaust with 6in mitres, sps62, silencer ring MIA, smarty tnt, edge EZ, valiar 600hp clutch, arson kit, airdog 150, revtek leveling kit, 33x12.50 mickey thompson MTZ's, all lights smoked and blacked out. WAITIN on RiZe traction bars!

"Thanks to chuck @ New Era Diesel"

***cumminator*** · 06-30-2008, 09:14 PM

you could try:

4wd specialist
410 Washington Street
West Monroe, Louisiana, 71292
Phone: (318)388-3444

__________________
2003 black 3500drw 4x4 laramie, 6speed,5in exhaust with 6in mitres, sps62, silencer ring MIA, smarty tnt, edge EZ, valiar 600hp clutch, arson kit, airdog 150, revtek leveling kit, 33x12.50 mickey thompson MTZ's, all lights smoked and blacked out. WAITIN on RiZe traction bars!

"Thanks to chuck @ New Era Diesel"

pharmD_08 · 07-01-2008, 04:20 PM

Alright. thanks.
I am planning on adding a cai, egde ez, raptor or airdog fuel pump, and either hho or water/meth injection. I replaced the muffler and cat with a strait pipe but am thinking about upgrading to an aftermarket 4" exhaust. I also want to get a quadzilla recon installed to monitor boost, fuel pressure, and egt. thanks again for the help I will give them a call.

__________________
00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

jmd025 · 07-04-2008, 10:17 PM

I could help you put all that on. I live in near Rayville, and do all my own work. If you wanted to do it yourself, I could just "supervise".

__________________
90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies

02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+

Goat Roper 67 · 07-09-2008, 04:21 PM

You can also try ORI (OffRoad Innovations) located offHwy 80 West
behind the credit building (red). They
put my 2" leveling kit and did a great
job.

Bob Mitcham
343-4079

__________________
2008 Megacab 4X4 Laramie;68 rfe Skyjacker level kit,ONKI boards, A-pillar
TRANS,EGT,TURBO, Defiant bar,Viper

pharmD_08 · 07-09-2008, 06:48 PM

thanks for the input...
jmd025 that sounds awesome, I am still getting together parts and deciding what all I want to do... I will probably get back with you later in August and see if you are still available to make sure I put everything together right. lol.
thanks again,
Trey

__________________
00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

jmd025 · 07-10-2008, 07:57 PM

Sure thing man, just let me know when you get ready.

__________________
90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies

02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+

hambone88 · 07-16-2008, 05:46 PM

hey im from monroe!!!! i only trust 4wd specialist to do my work

__________________
red072500 quad cab,18in blk xd monstrs,37x13.50r18 dc md cntris,6in sprlift w/5100s,s/lift dual stab bar w/ 5100s,"custom"intake"straight pipe, bnks6gun
cj7jeep,400hp 350,frd 1ton trnsfr,36in iroks,rollcage, pnted grn rino lning,no stk prts

hambone88 · 07-16-2008, 05:47 PM

just talk to josh he will b glad to help u or tell u who can

__________________
red072500 quad cab,18in blk xd monstrs,37x13.50r18 dc md cntris,6in sprlift w/5100s,s/lift dual stab bar w/ 5100s,"custom"intake"straight pipe, bnks6gun
cj7jeep,400hp 350,frd 1ton trnsfr,36in iroks,rollcage, pnted grn rino lning,no stk prts

jmd025 · 07-19-2008, 01:36 PM

hambone,
You're from rayville? I haven't seen your truck around I dont guess. But I don't get out much.

Edit: I realized who you are today.

__________________
90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies

02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+

Last edited by jmd025 : 07-21-2008 at 06:40 PM.

06-28-2008, 05:40 PM	#1 (permalink)
pharmD_08 Newbie Join Date: Jun 2008 Posts: 16 pharmD_08's Truck Pics	Monroe/West Monroe Hey, I am looking to add on some upgrades to my truck, but don't have the tools or the time to do the job. So... does anyone know of a decent diesel shop in Monroe??? thanks __________________ 00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

07-09-2008, 04:21 PM	#6 (permalink)
Goat Roper 67 Newbie Join Date: Dec 2007 Location: Monroe, Louisiana Posts: 18 Goat Roper 67's Truck Pics	Mods You can also try ORI (OffRoad Innovations) located offHwy 80 West behind the credit building (red). They put my 2" leveling kit and did a great job. Bob Mitcham 343-4079 __________________ 2008 Megacab 4X4 Laramie;68 rfe Skyjacker level kit,ONKI boards, A-pillar TRANS,EGT,TURBO, Defiant bar,Viper

07-19-2008, 01:36 PM	#11 (permalink)
jmd025 Newbie Join Date: Jul 2008 Location: louisiana Posts: 17 jmd025's Truck Pics	hambone88 hambone, You're from rayville? I haven't seen your truck around I dont guess. But I don't get out much. Edit: I realized who you are today. __________________ 90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies 02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+ Last edited by jmd025 : 07-21-2008 at 06:40 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

06-30-2008, 09:13 PM	#2 (permalink)
*cumminator* Cummins Nut Join Date: Feb 2008 Location: Zanesville,OH/Oak Grove,LA Posts: 367 cumminator's Truck Pics	what exactly are you wanting to do?....i dont believe there are many, if any shops in monroe. but sure with that town being that big there will be someone..ill try to find something out. __________________ 2003 black 3500drw 4x4 laramie, 6speed,5in exhaust with 6in mitres, sps62, silencer ring MIA, smarty tnt, edge EZ, valiar 600hp clutch, arson kit, airdog 150, revtek leveling kit, 33x12.50 mickey thompson MTZ's, all lights smoked and blacked out. WAITIN on RiZe traction bars! "Thanks to chuck @ New Era Diesel"

06-30-2008, 09:14 PM	#3 (permalink)
*cumminator* Cummins Nut Join Date: Feb 2008 Location: Zanesville,OH/Oak Grove,LA Posts: 367 cumminator's Truck Pics	you could try: 4wd specialist 410 Washington Street West Monroe, Louisiana, 71292 Phone: (318)388-3444 __________________ 2003 black 3500drw 4x4 laramie, 6speed,5in exhaust with 6in mitres, sps62, silencer ring MIA, smarty tnt, edge EZ, valiar 600hp clutch, arson kit, airdog 150, revtek leveling kit, 33x12.50 mickey thompson MTZ's, all lights smoked and blacked out. WAITIN on RiZe traction bars! "Thanks to chuck @ New Era Diesel"

07-01-2008, 04:20 PM	#4 (permalink)
pharmD_08 Newbie Join Date: Jun 2008 Posts: 16 pharmD_08's Truck Pics	Alright. thanks. I am planning on adding a cai, egde ez, raptor or airdog fuel pump, and either hho or water/meth injection. I replaced the muffler and cat with a strait pipe but am thinking about upgrading to an aftermarket 4" exhaust. I also want to get a quadzilla recon installed to monitor boost, fuel pressure, and egt. thanks again for the help I will give them a call. __________________ 00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

07-04-2008, 10:17 PM	#5 (permalink)
jmd025 Newbie Join Date: Jul 2008 Location: louisiana Posts: 17 jmd025's Truck Pics	I could help you put all that on. I live in near Rayville, and do all my own work. If you wanted to do it yourself, I could just "supervise". __________________ 90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies 02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+

07-09-2008, 06:48 PM	#7 (permalink)
pharmD_08 Newbie Join Date: Jun 2008 Posts: 16 pharmD_08's Truck Pics	thanks for the input... jmd025 that sounds awesome, I am still getting together parts and deciding what all I want to do... I will probably get back with you later in August and see if you are still available to make sure I put everything together right. lol. thanks again, Trey __________________ 00 cummins, 5 spd, Edge juice w/attitude, Airdog 100, Icebox cai, strait pipe, with the coveted 3.55

07-10-2008, 07:57 PM	#8 (permalink)
jmd025 Newbie Join Date: Jul 2008 Location: louisiana Posts: 17 jmd025's Truck Pics	Sure thing man, just let me know when you get ready. __________________ 90 D250 - Getrag, Phase II Ip, Isspros, Bhaf,single stack, Other Goodies 02 2500 QC - Nv4500, Airdog, Isspros, Bhaf, Rv275s, Quad XZT+

07-16-2008, 05:46 PM	#9 (permalink)
hambone88 Cummins Fanatic Join Date: Dec 2007 Location: rayville,la Posts: 170 hambone88's Truck Pics	hey im from monroe!!!! i only trust 4wd specialist to do my work __________________ red072500 quad cab,18in blk xd monstrs,37x13.50r18 dc md cntris,6in sprlift w/5100s,s/lift dual stab bar w/ 5100s,"custom"intake"straight pipe, bnks6gun cj7jeep,400hp 350,frd 1ton trnsfr,36in iroks,rollcage, pnted grn rino lning,no stk prts

07-16-2008, 05:47 PM	#10 (permalink)
hambone88 Cummins Fanatic Join Date: Dec 2007 Location: rayville,la Posts: 170 hambone88's Truck Pics	just talk to josh he will b glad to help u or tell u who can __________________ red072500 quad cab,18in blk xd monstrs,37x13.50r18 dc md cntris,6in sprlift w/5100s,s/lift dual stab bar w/ 5100s,"custom"intake"straight pipe, bnks6gun cj7jeep,400hp 350,frd 1ton trnsfr,36in iroks,rollcage, pnted grn rino lning,no stk prts