OFFICIAL Wichita Dyno Day Thread

kscumminsdriver · 06-24-2008, 03:53 PM

OK... I finally got a hold of Chris with Wichita Dyno to get things set up...

Date: Saturday, July 19th
Time: 10:00 a.m.
Cost: $70 for 3 runs...
Dyno: Dyno Dynamics
Website: Wichita Dyno
Address: 1851 S. Hoover Road

Other:
If you have a dually you will need to remove your outside wheel as it won't fit on his dyno.

Chris will operate all trucks. That's just his policy... you are welcome to ride shotgun and change levels or give advice on how your truck 'drives'.

No major changes to the trucks while on the dyno... i.e., no turbo swaps, no injector swaps... mainly this is for the gasser crowd who might try and write an entire fuel map on a laptop... he said if it's a plug and play(TST, Edge J/A, Adrenaline or similar) and you want to change levels that's not a problem... if you want to load a new Smarty software I'd say that's pushing the limits.

He doesn't have a lot of experience with diesels so this might be a bit of a learning experience for him.

What you need to do is make a firm decision on whether or not you will be able to attend, participate, spectate, etc... we need at least 6 trucks to spin the rollers but I'd prefer 8-15 trucks to make it a real good show... he said 15 is about the max he can do in a day... did 18 in 8.5 hours but would prefer to not try that again.

Someone want to volunteer a grill??? or to film it??

As it gets closer to the date, we can firm the details up but the time, date and location have been set, now we need some trucks...

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

Last edited by kscumminsdriver : 07-14-2008 at 10:24 AM.

lostnwalmart · 06-30-2008, 05:42 PM

had to pick a time after i leave so you can be the highest huh? lol good luck guys!

__________________
2001 4x4, airdog 150, Custom nv4500, 8in cat stack, monster 2VP, custom Valair DD, adraline, custom 6 hole injectors, bigstick cam, p&p head, bd special spearco intercoola
Thanks to Dieselnut, Coaltrain, www.hollandcourtsales.com

kscumminsdriver · 06-30-2008, 06:28 PM

Quote:

Originally Posted by lostnwalmart

had to pick a time after i leave so you can be the highest huh? lol good luck guys!

essentially... I just hope my head is back on by this time...

we may also be swapping in a new bottom turbo once I hear back from BD.

Who all else is in for this?? really need to have at least 6 or 7 trucks to make it worth Chris' time.

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

DOOKEY · 06-30-2008, 07:48 PM

I will run the stocker just to help out with the numbers. I don't even need 3 runs as it shouldn't change much. LOL. I can also bring the DSLR for good quality pictures. I might be able to score a decent grill. Who wants to bring the burgers and such??

__________________
06/2500HD/CTD/QUADCAB/AUTO/4x4
99TJ/LT1/4L60E/D300/D60/14B/5.13s/42s/Full Hydro/116"WB

ttitus · 07-02-2008, 11:48 AM

My family is in town that weekend so Im in, but only for limited time slots.

I realize that Chris will drive the trucks, but what liability does he take if he is driving the truck and it breaks. Sign a waiver and hope for the best?

__________________
2007, QC, 4X4, 5.9, 6-speed, Black, Silencer ring MIA, Kitty hollowed out, Straight piped, 6" MRBP tip, Ice Box, Smarty, AirDog 150, Quad Recon gauges

kscumminsdriver · 07-02-2008, 04:57 PM

Quote:

Originally Posted by ttitus

My family is in town that weekend so Im in, but only for limited time slots.

I realize that Chris will drive the trucks, but what liability does he take if he is driving the truck and it breaks. Sign a waiver and hope for the best?

Yeah, I thought about that... I'll give him a call next week and ask about that.

Is there a particular time you'd be able to get on the rollers??

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

ttitus · 07-02-2008, 06:18 PM

Before or right after lunch would work best. We are going to the rodeo in pretty prarie so before two or three if I could. Let me know what you find out. THX

__________________
2007, QC, 4X4, 5.9, 6-speed, Black, Silencer ring MIA, Kitty hollowed out, Straight piped, 6" MRBP tip, Ice Box, Smarty, AirDog 150, Quad Recon gauges

kscumminsdriver · 07-07-2008, 04:40 PM

Come on guys... if we can't get a few more trucks this week, I'm going to have to cancel with Chris...

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

SLK · 07-09-2008, 10:19 AM

You can count me in....what did you find out about the liability part? I'm not too worried about it, but I would like to know going into it where we stand.

__________________
'05, 2500 Quad Cab, 4x4, BD X-tuner, Banks exhaust, AFE stage II, Quadzilla Recon gauge, AMSOIL 15/40, no cat no mo

, Access bed cover

kscumminsdriver · 07-13-2008, 07:14 PM

Sorry guys, been away from 'civilization' for a few days... I'll call Chris tomorrow about the liability he takes, if any.... but if it's just 4 trucks, I think it's best if we try and reschedule. I'll see what Chris says about it though.

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

SLK · 07-14-2008, 07:39 AM

I'm ok with it if we need to re-schedule....summer is plenty busy.

__________________
'05, 2500 Quad Cab, 4x4, BD X-tuner, Banks exhaust, AFE stage II, Quadzilla Recon gauge, AMSOIL 15/40, no cat no mo

, Access bed cover

kscumminsdriver · 07-14-2008, 10:23 AM

I talked with Chris this morning and he agreed that if it's just 4 trucks that it's really not worth anyone's time so we will reschedule. So, the dyno day is now on hold again. I'll send PM's out when I get home from work today.

I also asked about the liability issue and he said he has a waiver form to complete that absolves him and the shop of any liability in the event of a vehicle issue....

__________________
2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

06-24-2008, 03:53 PM	#1 (permalink)
kscumminsdriver Cummins Nut Join Date: Nov 2007 Location: Wichita, Kansas Posts: 335 kscumminsdriver's Truck Pics	CANCELLED - OFFICIAL Wichita Dyno Day Thread OK... I finally got a hold of Chris with Wichita Dyno to get things set up... Date: Saturday, July 19th Time: 10:00 a.m. Cost: $70 for 3 runs... Dyno: Dyno Dynamics Website: Wichita Dyno Address: 1851 S. Hoover Road Other: If you have a dually you will need to remove your outside wheel as it won't fit on his dyno. Chris will operate all trucks. That's just his policy... you are welcome to ride shotgun and change levels or give advice on how your truck 'drives'. No major changes to the trucks while on the dyno... i.e., no turbo swaps, no injector swaps... mainly this is for the gasser crowd who might try and write an entire fuel map on a laptop... he said if it's a plug and play(TST, Edge J/A, Adrenaline or similar) and you want to change levels that's not a problem... if you want to load a new Smarty software I'd say that's pushing the limits. He doesn't have a lot of experience with diesels so this might be a bit of a learning experience for him. What you need to do is make a firm decision on whether or not you will be able to attend, participate, spectate, etc... we need at least 6 trucks to spin the rollers but I'd prefer 8-15 trucks to make it a real good show... he said 15 is about the max he can do in a day... did 18 in 8.5 hours but would prefer to not try that again. Someone want to volunteer a grill??? or to film it?? As it gets closer to the date, we can firm the details up but the time, date and location have been set, now we need some trucks... __________________ 2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr... Last edited by kscumminsdriver : 07-14-2008 at 10:24 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

06-30-2008, 05:42 PM	#2 (permalink)
lostnwalmart Diesel Head Join Date: Apr 2006 Location: grand junction co Posts: 1,027 lostnwalmart's Truck Pics	had to pick a time after i leave so you can be the highest huh? lol good luck guys! __________________ 2001 4x4, airdog 150, Custom nv4500, 8in cat stack, monster 2VP, custom Valair DD, adraline, custom 6 hole injectors, bigstick cam, p&p head, bd special spearco intercoola Thanks to Dieselnut, Coaltrain, www.hollandcourtsales.com

06-30-2008, 07:48 PM	#4 (permalink)
DOOKEY Cummins Fan Join Date: Jun 2008 Location: Wichita, KS Posts: 46 DOOKEY's Truck Pics	I will run the stocker just to help out with the numbers. I don't even need 3 runs as it shouldn't change much. LOL. I can also bring the DSLR for good quality pictures. I might be able to score a decent grill. Who wants to bring the burgers and such?? __________________ 06/2500HD/CTD/QUADCAB/AUTO/4x4 99TJ/LT1/4L60E/D300/D60/14B/5.13s/42s/Full Hydro/116"WB

07-02-2008, 11:48 AM	#5 (permalink)
ttitus Cummins Fan Join Date: Jul 2007 Location: wichita, KS Posts: 74 ttitus's Truck Pics	My family is in town that weekend so Im in, but only for limited time slots. I realize that Chris will drive the trucks, but what liability does he take if he is driving the truck and it breaks. Sign a waiver and hope for the best? __________________ 2007, QC, 4X4, 5.9, 6-speed, Black, Silencer ring MIA, Kitty hollowed out, Straight piped, 6" MRBP tip, Ice Box, Smarty, AirDog 150, Quad Recon gauges

07-02-2008, 06:18 PM	#7 (permalink)
ttitus Cummins Fan Join Date: Jul 2007 Location: wichita, KS Posts: 74 ttitus's Truck Pics	Before or right after lunch would work best. We are going to the rodeo in pretty prarie so before two or three if I could. Let me know what you find out. THX __________________ 2007, QC, 4X4, 5.9, 6-speed, Black, Silencer ring MIA, Kitty hollowed out, Straight piped, 6" MRBP tip, Ice Box, Smarty, AirDog 150, Quad Recon gauges

07-07-2008, 04:40 PM	#8 (permalink)
kscumminsdriver Cummins Nut Join Date: Nov 2007 Location: Wichita, Kansas Posts: 335 kscumminsdriver's Truck Pics	Come on guys... if we can't get a few more trucks this week, I'm going to have to cancel with Chris... __________________ 2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

07-09-2008, 10:19 AM	#9 (permalink)
SLK Cummins Enthusiast Join Date: Feb 2007 Location: Wichita, KS Posts: 244 SLK's Truck Pics	You can count me in....what did you find out about the liability part? I'm not too worried about it, but I would like to know going into it where we stand. __________________ '05, 2500 Quad Cab, 4x4, BD X-tuner, Banks exhaust, AFE stage II, Quadzilla Recon gauge, AMSOIL 15/40, no cat no mo , Access bed cover

07-13-2008, 07:14 PM	#10 (permalink)
kscumminsdriver Cummins Nut Join Date: Nov 2007 Location: Wichita, Kansas Posts: 335 kscumminsdriver's Truck Pics	Sorry guys, been away from 'civilization' for a few days... I'll call Chris tomorrow about the liability he takes, if any.... but if it's just 4 trucks, I think it's best if we try and reschedule. I'll see what Chris says about it though. __________________ 2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...

07-14-2008, 07:39 AM	#11 (permalink)
SLK Cummins Enthusiast Join Date: Feb 2007 Location: Wichita, KS Posts: 244 SLK's Truck Pics	I'm ok with it if we need to re-schedule....summer is plenty busy. __________________ '05, 2500 Quad Cab, 4x4, BD X-tuner, Banks exhaust, AFE stage II, Quadzilla Recon gauge, AMSOIL 15/40, no cat no mo , Access bed cover

07-14-2008, 10:23 AM	#12 (permalink)
kscumminsdriver Cummins Nut Join Date: Nov 2007 Location: Wichita, Kansas Posts: 335 kscumminsdriver's Truck Pics	I talked with Chris this morning and he agreed that if it's just 4 trucks that it's really not worth anyone's time so we will reschedule. So, the dyno day is now on hold again. I'll send PM's out when I get home from work today. I also asked about the liability issue and he said he has a waiver form to complete that absolves him and the shop of any liability in the event of a vehicle issue.... __________________ 2002 QC, SB 4x4 Ram 2500 w/H.O. Cummins. I.I. HRVP44, FASS, TST Competition box, Smarty, Mach 5's, Di/Pricol gauges, South Bend 3850DD, single 6" stack, BD twins, ATS exhaust manifold, F1 valve springs,ARP head studs, O-rings, Fluidampr...