Dyno day at Floor It Diesel.

[Cummins in Kansas]

322.1hp
779.0FtLb
2002 24 valve S.O.
The torque converter was unlocking every time,trans was slipping and the smarty and big sticks were off. Can't wait till John and Clay can get to my tranny so I can up the power again. Not bad for almost stock though Good to see some you guys there that traveled from out of state,I had a blast with all yall.

[elandon1201]

Originally Posted by moparpower1985

But you gotta keep in mind, all I have for "performance mods" is the Edge juice w/ attitude on level 5 (no hot unlock) Everything else is stock except for the deletes, which isn't really a performance gain other than the 4" straight pipe. I don't even have an intake. So I think that's pretty good. Hell, I would've easily broke 400 with some 265's and a new fuel filter.......

If hadnt been a sissy and let me load that SMARTY on your truck I think you would have been kissing 500HP

[moparpower1985]

Originally Posted by elandon1201

If hadnt been a sissy and let me load that SMARTY on your truck I think you would have been kissing 500HP

Thanks for the support elandon. That's next on my list, I'll be getting a hold of you pretty soon.

[cumminspower04]

so john can hook me up with some 90's and put a clutch in my truck and help me put twins on if i ask him is he on the forum whats his number

[Cummins in Kansas]

I'm sure John will help for a small fee.....He is the owner of Floor It diesel performance, unless your talking about someone else?

[elandon1201]

Originally Posted by moparpower1985

Thanks for the support elandon. That's next on my list, I'll be getting a hold of you pretty soon.

Anytime buddy Just making sure your head doesnt get too big!! Let me know when you want to work on the truck I would be happy to help.

[elandon1201]

Originally Posted by cumminspower04

so john can hook me up with some 90's and put a clutch in my truck and help me put twins on if i ask him is he on the forum whats his number

Where are you from?? I know John is overwhelmed. If it is going to take too long with him let me know I can get parts fairly easily and if you are in the KC area we could do the clutch. It is pretty easy.

[5.9Toy]

We are all from the Junction City, Manhattan and Salina area

[elandon1201]

Ahh I see. Like I said hit John up first and see what the timeline is. If you need anything let me know

[cascius]

Originally Posted by cumminspower04

so john can hook me up with some 90's and put a clutch in my truck and help me put twins on if i ask him is he on the forum whats his number

Yeah, that wouldn't be a problem. Right now we're scheduling about a month out at the soonest, and plan on the truck being down for a minimum of two to three weeks. You'll have to plan on the head coming off to o-ring and put head studs in as well if you plan on running twins. We are super swamped with pumps and transmissions at the moment, and John is trying to get ready for the TS event and Diesel Power Challenge in a couple weeks. If you call the shop, leave a message and he'll get back to you when he can. You'll have to be patient though with him though. He will call back, it just may take a little time.

A few of the guys that left early missed the exhibition run by the black daully. It laid down 850 hp, and 1850 ft lbs of torque on a single turbo. Pretty cool to see run.

[MOcum]

I got to see that truck when I was up getting my tranny done. Does anyone know how big of sticks he is running?

[cumminspower04]

Originally Posted by elandon1201

Where are you from?? I know John is overwhelmed. If it is going to take too long with him let me know I can get parts fairly easily and if you are in the KC area we could do the clutch. It is pretty easy.

i live in ottawa pm me your cell yeah i need lots of parts