Anyone with a Smarty

[Cummins4ever]

Hey would anyone around here have a smarty that could load the high idle on my second gen?? I haven't been apart of this chapter but have been around the forum for a while, so id like to get into the chapter.

Thanks
Cummins4ever

__________________
-1998.5, 2500, 4x4, Long Box, Regular cab, Goerend Trans, 100hp injectors, Silencer ring MIA, A-pillar gauges, Westin Bull Bar, 4" Straight Pipe, 5" tip, Cab Running Lights, Running Board Lights, BHAF w/ heat shield, Quadzilla XZT+, Towing mirrors,

[CumminsCrazed]

Well your definitely welcome to be a a part of the Iowa chapter

As far as the Smarty goes, you could try contacting mishkaya here on the forum. He lives in the Des Moines area and i know he has a smarty of 2 that he would probably be more than willing to let you load and unload to get the high idle feature. Try PMing him and see what he says.

If nothing else, i plan on purchasing one myself here pretty soon, and id gladly letcha use mine as well

__________________
Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear

[awenthol]

Are there even any 3rd gen guys running Smarty, from IA? I can't believe there aren't more Iowans on here....

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

[turbotrent]

Originally Posted by Cummins4ever

Hey would anyone around here have a smarty that could load the high idle on my second gen?? I haven't been apart of this chapter but have been around the forum for a while, so id like to get into the chapter.

Thanks
Cummins4ever

If ya do find 1 let me know. The dealer was supposed to install last feb when I got my speedo recalibrated but apparently they just took my $$$

__________________
2000 2500 QC 4X4 5spd, EDGE HOT juice w/attitude(wire tapped), II hrvp44, Magna Flow 4", AFE stage 1, silencer ring MIA, Bosch 275's, Nitto 305's,custom traction bars, SBC OFE, BD short shifter, white gauge face, Dee Zee nerf bars, Billet grill & bumper inserts, Custom breather tank, updated main shaft w/nut, Alteeza tail lights,

[JeepManIowa]

I'm in the Cumming, Iowa area (south of West Des Moines), Stew Hansen Dodge enabled my high idle for free.

[awenthol]

They (SH) did mine free as well...but don't know that they would do it on an older truck...

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

---

Last edited by awenthol : 02-21-2008 at 12:37 PM.

[CumminThru]

I have borrowed a Smarty, done the same thing your looking to do and that high idle is a beautiful thing on cold days. Neighbors don't seem to be throwin me dirty looks anymore at 10:15 at night when I fire it up to leave for work at 10:30 either, that high idle kinda smooths out alot of the racket a 2nd Gen makes and you actually do get some heat quicker than before.

__________________
Dan - Ontario Cummins Crew President Ontario Chapter
GONE but never forgotten - 2001.5 24V QC SLT Laramie 2wd 47RE/3.55, LB, ICEBOX w/4510, FBD 4" turbo back w 5x18 SS tip, silencer ring MIA, FASS 150, IIS HRVP, DiPricol 30 psi FP guage, 1 qt 2 stroke EVERY tank!! 16.5481 @83.29mph on 7/7/07
My new ride .... for now - 06 JEEP LIBERTY CRD. NO MODS, its a lease...

[Ruckuz]

Bahh do it for free. I use a snow brush

__________________
1996 2500 4X4 Auto CC LB Banks Power Pack, Boost, Pyro & Oil Temp, 3k GSK, BHAF, #0 Plate Full Forward, Low Stall Triple Disc TC, TST Valve Body, Mystery Switch, Rancho RS9000's, MTX MZS1204'2/Alpine MRD M501, Viper Alarm & Remote Start, Dual 5" Grand Rock Turnouts, Rickson 19.5"s, and lots of stuff to make her look good.

[turbotrent]

Originally Posted by Ruckuz

Bahh do it for free. I use a snow brush

Thats what I've been doin fer 5 yrs! Makes it kinda hard to clean the snow off when the brush is in the truck!!

__________________
2000 2500 QC 4X4 5spd, EDGE HOT juice w/attitude(wire tapped), II hrvp44, Magna Flow 4", AFE stage 1, silencer ring MIA, Bosch 275's, Nitto 305's,custom traction bars, SBC OFE, BD short shifter, white gauge face, Dee Zee nerf bars, Billet grill & bumper inserts, Custom breather tank, updated main shaft w/nut, Alteeza tail lights,

[CumminThru]

Do what I USED to do, chop down an ole broom stick, jamb it between the seat and the skinny pedal.....

Them electric seats make for a variable high idle, set it where ya wanna see the tach running at ....

__________________
Dan - Ontario Cummins Crew President Ontario Chapter
GONE but never forgotten - 2001.5 24V QC SLT Laramie 2wd 47RE/3.55, LB, ICEBOX w/4510, FBD 4" turbo back w 5x18 SS tip, silencer ring MIA, FASS 150, IIS HRVP, DiPricol 30 psi FP guage, 1 qt 2 stroke EVERY tank!! 16.5481 @83.29mph on 7/7/07
My new ride .... for now - 06 JEEP LIBERTY CRD. NO MODS, its a lease...

[Cummins4ever]

haha...thats pretty funny, yea i got it now....Quad got the high idle figured out on the XZT+ so i have it now...thanks for the help guys!

__________________
-1998.5, 2500, 4x4, Long Box, Regular cab, Goerend Trans, 100hp injectors, Silencer ring MIA, A-pillar gauges, Westin Bull Bar, 4" Straight Pipe, 5" tip, Cab Running Lights, Running Board Lights, BHAF w/ heat shield, Quadzilla XZT+, Towing mirrors,

[mishkaya]

I think you'll like Quad's high idle feature the best, it's the most practical for me anyway. Glad you got it sorted out.
mishkaya