Somethings I saw in Des Moines and on the way...

***awenthol*** · 03-03-2007, 06:04 PM

So, after being couped up in the house from Thursday to Saturday I left... The road I would normally take to get to I35 (paralles 35) was blocked off by this!

The road was drifted for a good mile. The drift in this spot is well over the height of the truck! Took two days for the county to get through it, they just got it cleared late this afternoon. They got a bunch of trucks and loaders stuck in it. One of the maintainters smoked a car that was stuck/hidden in it.

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

Last edited by awenthol : 03-03-2007 at 07:34 PM.

***awenthol*** · 03-03-2007, 06:08 PM

Then in Des Moines I saw this!

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

Last edited by awenthol : 03-03-2007 at 07:48 PM.

MRaynor · 03-03-2007, 06:46 PM

Those were some good pics. That is a lot of snow.

__________________
Mike

05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

MRaynor · 03-03-2007, 06:47 PM

Oh that is a sweet looking dually too

__________________
Mike

05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

**CumminsCrazed** · 03-03-2007, 07:34 PM

i have been IN that dually before. The guys who run Kelderman (the K in the back window) went through the auto program i was in and they brought up some trucks. One of which was that one. That truck is the one that pulls the trailer. Nice truck but its pretty stock......

BTW, you gonna make it to the meet tomorrow Aaron?

__________________
Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear

Last edited by CumminsCrazed : 03-03-2007 at 07:36 PM.

***awenthol*** · 03-03-2007, 07:50 PM

Quote:

Originally Posted by CumminsCrazed

BTW, you gonna make it to the meet tomorrow Aaron?

Don't know...prolly not but I'll see what happens.

The dually doesn't have chip or anything?? And, I forgot to look but is it an HO??

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

**CumminsCrazed** · 03-04-2007, 05:43 AM

nope, its like a 99 or 00 with the A/T. IIRC id doesnt even blow black smoke....unless theyve done more since i saw it a year ago

__________________
Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear

03-03-2007, 06:04 PM	#1 (permalink)
*awenthol* Pretending to be a poser Join Date: Jan 2007 Location: Central Iowa Posts: 3,760 awenthol's Truck Pics	Somethings I saw in Des Moines and on the way... So, after being couped up in the house from Thursday to Saturday I left... The road I would normally take to get to I35 (paralles 35) was blocked off by this! The road was drifted for a good mile. The drift in this spot is well over the height of the truck! Took two days for the county to get through it, they just got it cleared late this afternoon. They got a bunch of trucks and loaders stuck in it. One of the maintainters smoked a car that was stuck/hidden in it. __________________ 2006 Laramie QC, SB, 4x4, 48RE 2 3 06/21/2008 - 478hp - 923 lb-ft Last edited by awenthol : 03-03-2007 at 07:34 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

03-03-2007, 06:08 PM	#2 (permalink)
*awenthol* Pretending to be a poser Join Date: Jan 2007 Location: Central Iowa Posts: 3,760 awenthol's Truck Pics	Then in Des Moines I saw this! __________________ 2006 Laramie QC, SB, 4x4, 48RE 2 3 06/21/2008 - 478hp - 923 lb-ft Last edited by awenthol : 03-03-2007 at 07:48 PM.

03-03-2007, 06:46 PM	#3 (permalink)
MRaynor Diesel Freak Join Date: Jul 2006 Location: Chapin, SC Posts: 870 MRaynor's Truck Pics	Those were some good pics. That is a lot of snow. __________________ Mike 05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

03-03-2007, 06:47 PM	#4 (permalink)
MRaynor Diesel Freak Join Date: Jul 2006 Location: Chapin, SC Posts: 870 MRaynor's Truck Pics	Oh that is a sweet looking dually too __________________ Mike 05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

03-03-2007, 07:34 PM	#5 (permalink)
CumminsCrazed Diesel Head Join Date: Aug 2006 Location: Mason City, Iowa Posts: 1,527 CumminsCrazed's Truck Pics	i have been IN that dually before. The guys who run Kelderman (the K in the back window) went through the auto program i was in and they brought up some trucks. One of which was that one. That truck is the one that pulls the trailer. Nice truck but its pretty stock...... BTW, you gonna make it to the meet tomorrow Aaron? __________________ Silver 2001.5 Ram 2500 Cummins H.O. 6 spd. Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear Last edited by CumminsCrazed : 03-03-2007 at 07:36 PM.

03-04-2007, 05:43 AM	#7 (permalink)
CumminsCrazed Diesel Head Join Date: Aug 2006 Location: Mason City, Iowa Posts: 1,527 CumminsCrazed's Truck Pics	nope, its like a 99 or 00 with the A/T. IIRC id doesnt even blow black smoke....unless theyve done more since i saw it a year ago __________________ Silver 2001.5 Ram 2500 Cummins H.O. 6 spd. Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear