Where can I get an Oil Analysis kit?

[DBLR]

While I'm thinking of it does anyone know where I can get an UOA kit in the Mason City area for Blackstone Labs? I sent for one from Blackstone but they say it takes 2-3 weeks to get here I thought it would be a good idea to have one done being it has used some oil in the last 2500 miles and wonder if maybe the rings are not seated or maybe my truck doesn't like the 5w40 Rotella oil! Also I'm going to switch to Amsoil this oil change.

__________________
2006 Ram 2500 Big Horn Edition Auto 5.9L Mineral Gray Met. Quad Cab SB 4X4 SRW 3.73's

[Jakey's'01H.O.]

https://www.amsoil.com/storefront/Se...?CategoryID=98
im not certain who amsoil sends theirs to...but here they are, and this is non-dealer pricing.

__________________
'01 ETH/SO VP. FOR SALE.
'04 silv quad SB AirDog. Arson 2. loaded. HOLLAND COURT DIESEL PERFORMANCE. WICKEDDIESEL. DIESELNUT COALTRAIN IS THE SH$T

[CumminsCrazed]

you dont need no stinkin oil analysis.....your motor is brand new, but maybe a 1/2 qt low

__________________
Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear

[turbotrent]

I know our local Cat dealership does them in house, don't know if you have 1 close or not but last time I checked it was under $20

__________________
2000 2500 QC 4X4 5spd, EDGE HOT juice w/attitude(wire tapped), II hrvp44, Magna Flow 4", AFE stage 1, silencer ring MIA, Bosch 275's, Nitto 305's,custom traction bars, SBC OFE, BD short shifter, white gauge face, Dee Zee nerf bars, Billet grill & bumper inserts, Custom breather tank, updated main shaft w/nut, Alteeza tail lights,

[D-Roc]

Originally Posted by DBLR

While I'm thinking of it does anyone know where I can get an UOA kit in the Mason City area for Blackstone Labs? I sent for one from Blackstone but they say it takes 2-3 weeks to get here I thought it would be a good idea to have one done being it has used some oil in the last 2500 miles and wonder if maybe the rings are not seated or maybe my truck doesn't like the 5w40 Rotella oil! Also I'm going to switch to Amsoil this oil change.

You can always store the oil in a clean container while you wait for a kit. I have done this. Blackstone also confirms it on their website. Just make sure it is clean.

[Racer9]

You should be able to get one from any Cummins/Cat/Detroit engine dealer/parts supply house, or heavy truck dealer.

__________________

'96 CTD, 4X4 flatbed, Isspro gauges, Skyjacker D-25's, ThurenFab track bar, lockRite.

Motor; BHAF, #100 fuel plate, Shimmed gov springs, Loose starwheel.

Exhaust; 16cm housing, 4" downpipe, 5" turnout stacks.

Trans; Dunrite VB/TC, Intelligent Engineering billet input shaft, Burt Brown rebuild/upgrade.

[Duluth Diesel]

I can set you up with oil analysis kits from AMSOIL if that helps. They go to Oil Analyzers Inc.

-Chuck

__________________
AMSOIL ONLINE STORE - DISCOUNT PRICING AVAILABLE
CLICK HERE FOR A FREE AMSOIL CATALOG

TWIN PORT SALES - AMSOIL SHIPPED DIRECT

CHANGE YOUR THINKING, NOT YOUR OIL.

INJEN Nanofiber Intake Systems

---

Last edited by Duluth Diesel : 02-24-2007 at 01:25 PM.

[CumminsCrazed]

Welcome to the IOWA forum guys!!!!!!!!!!

__________________
Silver 2001.5 Ram 2500 Cummins H.O. 6 spd.
Silencer ring MIA, Muffler/Res. MIA, FASS 150/95 GPH, Boost Elbow, Edge Comp, AutoMeter Boost Pyro and Fuel Pressure gauges, Amsoil Nanofiber 4510 Air intake filter, B&M Racing T handle shift knob, Kenwood speakers front and rear