Any good shops in southern Indiana?

kb9lsv · 11-04-2009, 07:51 PM

I am putting new jammer stage 3 nozzles on my truck once they arrive in the mail, does anyone know of a shop around Vincennes, IN that can pop test them and about what the cost will be? it will probably be a week or so before I get them installed. Also I would love to find someone around this area that owns a smarty that would be willing to download the 3 cyl/high idle into my truck for me. Any help would be greatly appreciated.

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

***johnyb59*** · 11-05-2009, 06:07 AM

Interstate Injection here in Seymour can check your pop off pressures. IDK about who has a Smarty.

__________________
2001 SRW QCLB 150 hp jammer nozzles, 120 hp quad stacked w/ 65 hp xzt+, tst stealth plate, walbro lift pump, leveling kit, autometer has all the gauges covered, Valair ceramic, 4" straight pipe, stock turbo "If it weren't for the United States military, there'd be NO United States of America."

**Haloman** · 11-05-2009, 10:09 AM

If you come down for this, I know a couple of guys have second gen smartys that can unload it and reload it for you.

Be glad to have you there:

Time for another Evansville Meet

__________________
01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings
CF.com KY Chap and KYDTR #41 Chap Presidents

Click Here to See what going on in the KY Chapter

kb9lsv · 11-05-2009, 11:01 AM

Quote:

Originally Posted by johnyb59

Interstate Injection here in Seymour can check your pop off pressures. IDK about who has a Smarty.

Seymour is about 2.5 hour drive from me, I am hoping to find some place closer, but I will keep them in mind. Sheid in Terre Haute is an hour or so closer, but have heard that they are expensive. would a Mack dealer have the equipment to check these?

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

kb9lsv · 11-05-2009, 11:03 AM

Quote:

Originally Posted by Haloman

If you come down for this, I know a couple of guys have second gen smartys that can unload it and reload it for you.

Be glad to have you there:

Time for another Evansville Meet

I probably wont get off work until about 6:30 that day, but if I can get off sooner I will be there. I would love to make it to this.

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

**Haloman** · 11-05-2009, 11:15 AM

Well it is 6:00 Central time. Vincennes is an hour ahead. That gives you some extra time. We will be hanging out for awhile. I dont of any shops in Vincennes but Kolbs in Evansville can get it done for you.

__________________
01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings
CF.com KY Chap and KYDTR #41 Chap Presidents

Click Here to See what going on in the KY Chapter

kb9lsv · 11-05-2009, 11:31 AM

I forgot about the time change. I will do my best to be there, about how much do you think Kolbs would charge?

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

**Haloman** · 11-05-2009, 11:35 AM

Quote:

Originally Posted by kb9lsv

I forgot about the time change. I will do my best to be there, about how much do you think Kolbs would charge?

I would call them. Its been a while since I have had anything done there. It shouldn't be too expensive to get them done.

__________________
01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings
CF.com KY Chap and KYDTR #41 Chap Presidents

Click Here to See what going on in the KY Chapter

kb9lsv · 11-05-2009, 11:47 AM

Ok, thanks, I will look up the number and give them a call, it will be a bit before I can get it done anyway being I just ordered the nozzles on Monday and they are not here yet.

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

kb9lsv · 11-05-2009, 11:50 AM

I just called him and will test for free, really hope no adjustments needed or will cost about 100...either way I can live with that.

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

**Haloman** · 11-05-2009, 11:51 AM

Quote:

Originally Posted by kb9lsv

I just called him and will test for free, really hope no adjustments needed or will cost about 100...either way I can live with that.

That sounds about right.

__________________
01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings
CF.com KY Chap and KYDTR #41 Chap Presidents

Click Here to See what going on in the KY Chapter

kb9lsv · 11-05-2009, 11:56 AM

well thanks for the help. I will be going to them when I get them ready.

__________________
James
2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

11-04-2009, 07:51 PM	#1 (permalink)
kb9lsv Cummins Fanatic Join Date: Feb 2009 Location: Vincennes, In. Posts: 102 Thanks: 0 Thanked 1 Time in 1 Post kb9lsv's Truck Pics	Any good shops in southern Indiana? I am putting new jammer stage 3 nozzles on my truck once they arrive in the mail, does anyone know of a shop around Vincennes, IN that can pop test them and about what the cost will be? it will probably be a week or so before I get them installed. Also I would love to find someone around this area that owns a smarty that would be willing to download the 3 cyl/high idle into my truck for me. Any help would be greatly appreciated. __________________ James 2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

11-05-2009, 06:07 AM	#2 (permalink)
*johnyb59* Overfueled N under-aired Join Date: Jul 2008 Location: Seymour, IN Posts: 652 Thanks: 11 Thanked 19 Times in 18 Posts johnyb59's Truck Pics	Interstate Injection here in Seymour can check your pop off pressures. IDK about who has a Smarty. __________________ 2001 SRW QCLB 150 hp jammer nozzles, 120 hp quad stacked w/ 65 hp xzt+, tst stealth plate, walbro lift pump, leveling kit, autometer has all the gauges covered, Valair ceramic, 4" straight pipe, stock turbo "If it weren't for the United States military, there'd be NO United States of America."

11-05-2009, 10:09 AM	#3 (permalink)
Haloman Kentucky Chap President Join Date: Jan 2008 Location: Henderson, Ky/Evansville,IN Posts: 975 Thanks: 0 Thanked 2 Times in 2 Posts Haloman's Truck Pics	If you come down for this, I know a couple of guys have second gen smartys that can unload it and reload it for you. Be glad to have you there: Time for another Evansville Meet __________________ 01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings CF.com KY Chap and KYDTR #41 Chap Presidents Click Here to See what going on in the KY Chapter

11-05-2009, 11:15 AM	#6 (permalink)
Haloman Kentucky Chap President Join Date: Jan 2008 Location: Henderson, Ky/Evansville,IN Posts: 975 Thanks: 0 Thanked 2 Times in 2 Posts Haloman's Truck Pics	Well it is 6:00 Central time. Vincennes is an hour ahead. That gives you some extra time. We will be hanging out for awhile. I dont of any shops in Vincennes but Kolbs in Evansville can get it done for you. __________________ 01.5 2500 CTD 2wd 6spd QC/SB Green SLT Audio, Low Fuel Press. Light, Flashtech 6K HIDs in 1 Piece Crystal Housings CF.com KY Chap and KYDTR #41 Chap Presidents Click Here to See what going on in the KY Chapter

11-05-2009, 11:31 AM	#7 (permalink)
kb9lsv Cummins Fanatic Join Date: Feb 2009 Location: Vincennes, In. Posts: 102 Thanks: 0 Thanked 1 Time in 1 Post kb9lsv's Truck Pics	I forgot about the time change. I will do my best to be there, about how much do you think Kolbs would charge? __________________ James 2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

11-05-2009, 11:47 AM	#9 (permalink)
kb9lsv Cummins Fanatic Join Date: Feb 2009 Location: Vincennes, In. Posts: 102 Thanks: 0 Thanked 1 Time in 1 Post kb9lsv's Truck Pics	Ok, thanks, I will look up the number and give them a call, it will be a bit before I can get it done anyway being I just ordered the nozzles on Monday and they are not here yet. __________________ James 2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

11-05-2009, 11:50 AM	#10 (permalink)
kb9lsv Cummins Fanatic Join Date: Feb 2009 Location: Vincennes, In. Posts: 102 Thanks: 0 Thanked 1 Time in 1 Post kb9lsv's Truck Pics	I just called him and will test for free, really hope no adjustments needed or will cost about 100...either way I can live with that. __________________ James 2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II

11-05-2009, 11:56 AM	#12 (permalink)
kb9lsv Cummins Fanatic Join Date: Feb 2009 Location: Vincennes, In. Posts: 102 Thanks: 0 Thanked 1 Time in 1 Post kb9lsv's Truck Pics	well thanks for the help. I will be going to them when I get them ready. __________________ James 2001 2500 24 valve Auto. 4X4, QC, 4.10's, silencer ring MIA, Juice w/Attitude, Fass DDRP, strait pipe, tc lockup switch, ScanGauge II