Need info on performance mods 4 my 98 12valve

homer98cummins · 07-31-2008, 10:41 PM

i have a 98 qc lb cummins and i already installed a 0 fuel plate but i am considering more mods i was considering dragon flow injectors and a quick diesel 64 turbo and if i got that id b getting a air dog 150 fuel system and ats arc flow intake and gauges i dont care about smoke just about egts and i dont want to redo my head for awhile could someone give me some suggestions?

**Headhunter** · 08-01-2008, 06:54 AM

well I can't be much help on the 12 valve.... but

and to the ICC forum!

__________________
Illinois Cummins Crew President Illinois Chapter Forum
2000 Ram 3500 6x4x2 dually, Hand shaker, 5 inch Bullhaulers (homemade KIT) , ISSPRO Guages, Flip up tow-mirrors, Air Dog, Smarty
2007.5 Ram 3500 6X4X4 DUALLY, 68RFE, Laramie H Pack, Line-X, Luverne Running boards, Front & rear Sunglasses! 6.7L of fun! Sunroof, Auto pilot

j-fox · 08-01-2008, 07:22 AM

Governor spring kit will really wake it up.
Get rid of the stock air filter for a good aftermarket one too.
The intake you mentioned won't show you any real gains at the power level you are at.
Read up on the p-7100 pump and its adjustments before you buy all that stuff!! A lot of power is in that pump.
You don't even need the lift pump either.
Slide the plate, adjust the aneroid.
What trans do you have?
either a clutch will be needed or trans mods before you destroy it.
Gauges, gauges and of course gauges to anyone wanting to up tune a diesel.
A mffler elim. kit may be nice too. I'm not sure you need a 4" yet, but it always is a good choice under 750 HP

chevy791979 · 08-01-2008, 07:24 AM

Quote:

Originally Posted by homer98cummins

i have a 98 qc lb cummins and i already installed a 0 fuel plate but i am considering more mods i was considering dragon flow injectors and a quick diesel 64 turbo and if i got that id b getting a air dog 150 fuel system and ats arc flow intake and gauges i dont care about smoke just about egts and i dont want to redo my head for awhile could someone give me some suggestions?

take a look at my sig and it may give you an idea. i would not waste the money on fass yet until you see it on your gauge that you need it.

__________________
95 12v one ton 5 spd. custom 5x14 injectors.66mm hx50 timing 17.5. 4k gv springs, marine head gasket, 12 mm studs 191 dv's. single 7 in stack.
421/ 893 ON OLD TUNE UP. guages of corse. POWER PARTS ENGINEERING DD clutch. FOR SALE.

homer98cummins · 08-01-2008, 02:14 PM

my pump has already been turned up by the previous owner and i can roll my 38.5 thornbirds when wanted im gunna put a bhaf on it and i hav an auto trans 47re i already installed a 5inch straight pipe too i already got a 3200 governor kit too my gauges will be ordered next month too

homer98cummins · 08-01-2008, 02:17 PM

im lookin to see if id hav to fire ring n head stud my head if i got a quick diesel 64 bcuz i dunt really want to do that just yet and i wanted to kno about the dragon flow injectors
but thanx 4 the help and info

**Cumminsturbo22** · 08-01-2008, 04:53 PM

welcome to the fourm!! i would PM Waynes World for the info needed. the mans a genius when it comes to 12v. is is in our ICC Club.
Nick

__________________

2006 Ram 2500 6 inch lift, 37' BFG MBRP stacks 6" Mitre tips, AIRAID intake, Raptor 150, AFE Bladerunner, MP-8,Smarty!,

Why is there never enough time to do it right the first time,
But always enough time to do it again?

cowboyupcash · 08-05-2008, 06:15 PM

your head wont ne able to handal at the pressure for long i put just a #5 fuel plate and poped it in month so watch it dont let it get too hott

__________________
i have a 97 cummins 12v with 5in turbo back dual stacks. a #5 fuel plate custom built trans. an AFE st2 air intake system i also have 3 gauge pod .
i like to thank stahl diesel , jefferson state diesel and NO LIMIT diesel performance

WAYNES WORLD · 08-27-2008, 04:44 PM

cowboyupcash,
Call me sometime & we can bench race till your phone melts.

wanga8@comcast.net for direct email & phone #'s

WAYNES WORLD

__________________
96, 2wd, 12v, Phat Shaft 62, bhaf, 4" all the way, my plate, 4,000 springs & afc mods, 20*, DF, 191's, Goerend triple & trans, studs, fire rings, power loc, Peirs boots, Peirs Cam, Hand stiched leather interior, Calvert bars,

07-31-2008, 10:41 PM	#1 (permalink)
homer98cummins Newbie Join Date: Jul 2008 Location: Red Bud,Il Posts: 8 homer98cummins's Truck Pics	Need info on performance mods 4 my 98 12valve i have a 98 qc lb cummins and i already installed a 0 fuel plate but i am considering more mods i was considering dragon flow injectors and a quick diesel 64 turbo and if i got that id b getting a air dog 150 fuel system and ats arc flow intake and gauges i dont care about smoke just about egts and i dont want to redo my head for awhile could someone give me some suggestions?

08-27-2008, 04:44 PM	#9 (permalink)
WAYNES WORLD Cummins Nut Join Date: Jun 2006 Location: justice, Il. Posts: 482 WAYNES WORLD's Truck Pics	Need info on performance mods 4 my 98 12valve cowboyupcash, Call me sometime & we can bench race till your phone melts. wanga8@comcast.net for direct email & phone #'s WAYNES WORLD __________________ 96, 2wd, 12v, Phat Shaft 62, bhaf, 4" all the way, my plate, 4,000 springs & afc mods, 20*, DF, 191's, Goerend triple & trans, studs, fire rings, power loc, Peirs boots, Peirs Cam, Hand stiched leather interior, Calvert bars,

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

08-01-2008, 06:54 AM	#2 (permalink)
Headhunter Illinois Chapter President Join Date: Apr 2006 Location: ILLINOIs Posts: 875 Headhunter's Truck Pics	well I can't be much help on the 12 valve.... but and to the ICC forum! __________________ Illinois Cummins Crew President Illinois Chapter Forum 2000 Ram 3500 6x4x2 dually, Hand shaker, 5 inch Bullhaulers (homemade KIT) , ISSPRO Guages, Flip up tow-mirrors, Air Dog, Smarty 2007.5 Ram 3500 6X4X4 DUALLY, 68RFE, Laramie H Pack, Line-X, Luverne Running boards, Front & rear Sunglasses! 6.7L of fun! Sunroof, Auto pilot

08-01-2008, 07:22 AM	#3 (permalink)
j-fox Cummins Fanatic Join Date: Apr 2008 Location: Chatham, Illinois Posts: 113 j-fox's Truck Pics	Governor spring kit will really wake it up. Get rid of the stock air filter for a good aftermarket one too. The intake you mentioned won't show you any real gains at the power level you are at. Read up on the p-7100 pump and its adjustments before you buy all that stuff!! A lot of power is in that pump. You don't even need the lift pump either. Slide the plate, adjust the aneroid. What trans do you have? either a clutch will be needed or trans mods before you destroy it. Gauges, gauges and of course gauges to anyone wanting to up tune a diesel. A mffler elim. kit may be nice too. I'm not sure you need a 4" yet, but it always is a good choice under 750 HP

08-01-2008, 02:14 PM	#5 (permalink)
homer98cummins Newbie Join Date: Jul 2008 Location: Red Bud,Il Posts: 8 homer98cummins's Truck Pics	my pump has already been turned up by the previous owner and i can roll my 38.5 thornbirds when wanted im gunna put a bhaf on it and i hav an auto trans 47re i already installed a 5inch straight pipe too i already got a 3200 governor kit too my gauges will be ordered next month too

08-01-2008, 02:17 PM	#6 (permalink)
homer98cummins Newbie Join Date: Jul 2008 Location: Red Bud,Il Posts: 8 homer98cummins's Truck Pics	im lookin to see if id hav to fire ring n head stud my head if i got a quick diesel 64 bcuz i dunt really want to do that just yet and i wanted to kno about the dragon flow injectors but thanx 4 the help and info

08-01-2008, 04:53 PM	#7 (permalink)
Cumminsturbo22 Illinois Chapter VP Join Date: Feb 2008 Location: Mudelein, IL Posts: 932 Cumminsturbo22's Truck Pics	welcome to the fourm!! i would PM Waynes World for the info needed. the mans a genius when it comes to 12v. is is in our ICC Club. Nick __________________ 2006 Ram 2500 6 inch lift, 37' BFG MBRP stacks 6" Mitre tips, AIRAID intake, Raptor 150, AFE Bladerunner, MP-8,Smarty!, Why is there never enough time to do it right the first time, But always enough time to do it again?

08-05-2008, 06:15 PM	#8 (permalink)
cowboyupcash Cummins Fan Join Date: Jan 2007 Posts: 89 cowboyupcash's Truck Pics	your head wont ne able to handal at the pressure for long i put just a #5 fuel plate and poped it in month so watch it dont let it get too hott __________________ i have a 97 cummins 12v with 5in turbo back dual stacks. a #5 fuel plate custom built trans. an AFE st2 air intake system i also have 3 gauge pod . i like to thank stahl diesel , jefferson state diesel and NO LIMIT diesel performance