air intakes

[ttitus]

I just got a 07 cummins about a month ago and am ready to start letting it breath alittle bit. just wondering what some quality applications or homemade jobs would be.

[Motorboat]

Iceboxmanufacturing.com

__________________
1997 Ram 3500, auto, 4X4. 4" Diamondeye, Icebox, Danin/Optix pyro, boost and trans. Deep trans. pan. LED marker, tail and clearance lights. Mr. Bob's hoses, 330s and a little adjustment here and here. Some stuff added some stuff removed, KDP tabbed.

[ttitus]

are there any tricks to making the new CR's really loud? i am probably going to just put a 5" straight on it

[JohnnyU]

Good Lord, how loud do you want? My straight-piped 04.5 was unbearable. I put a Magnaflow on it and it's still pretty loud, but much smoother.

__________________
2004.5 2500 4x4 Sport
QC/SB, BHAF, 4" Magnaflow 5" tip, 3" Procomp lift, 305/65/17 Procomp Xtreme A/T's on 17x9 Dick Cepek DC1's

[BBRam]

Originally Posted by ttitus

are there any tricks to making the new CR's really loud? i am probably going to just put a 5" straight on it

Is it the 6.7 or 5.9?

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3.5 CP3, F1 Flux ? Inj's, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GR 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[ttitus]

it is a 5.9, i want this rig to be as loud as possible witout stacks... and how do i do it?

---

Last edited by ttitus : 07-30-2007 at 07:39 PM. Reason: more info

[lamoparpower]

my straight 5" is pretty rediculous!

__________________
red 06' quad cab, 35" discoverer st's on MB's, onboard air, train horns, H.I.D.'s, no mo' silencer ring, homade CAI, edge juice w/attitude w/hot unlock & mp-8 7" mitres, kenwood nav/dvd indash full system w/2 12's... and.... more mods to come... just waiting on the lotto....

[duncan]

I just put on 4in turbo back MBRP on my 07 5.9L and its only loud when I stand on it idle is nice but not loud enough. I have a auto so running around 1500RPM then hammer it ohhh sounds sooo good! I just went to FL the other day and went through mobile they have a big tunnel there and you wouldnt belive all the noise I could make in there sounds good to go

__________________
2007 Dodge 2500 quad cab 4x4 5.9L diesel B&W turn over ball, MBRP 4" exhaust turbo back, EDGE juice with attitude, icebox, Silencer is MIA

[johndough]

Originally Posted by duncan

I just put on 4in turbo back MBRP on my 07 5.9L and its only loud when I stand on it idle is nice but not loud enough. I have a auto so running around 1500RPM then hammer it ohhh sounds sooo good! I just went to FL the other day and went through mobile they have a big tunnel there and you wouldnt belive all the noise I could make in there sounds good to go

was that on I10? i grew up in p'cola (well, pace, close enuf) and made lots of trips back and forth to mobile - back in the day - good grief im getting old, my lil rice burners didn't do the trick in there! LOL

__________________
2004.5 2500, QC, Auto, 4.10, TripleDog w/Outlook w/Pyro, Quad BF, ISSPRO Trans, Icebox
________________________________________
I love what I'm doing, I just don't know what I'm doing...

[TXLawDawg]

Originally Posted by ttitus

it is a 5.9, i want this rig to be as loud as possible witout stacks... and how do i do it?

I just had the cat and muffler cut off on mine and 4" pipe welded back in. With a 6" tip on the end...it's LOUD!

__________________
2007 2500 5.9 4x4 3.73 48RE/ 20X10 Mazzi Hulk wheels with 305/55/20 Nitto TG's / 2" Coil Spacers / No muff No cat / Diablo Sport Predator / Quadzilla Commander / Silencer Ring and Torque Tube Baffling MIA

[JohnnyU]

Originally Posted by TXLawDawg

I just had the cat and muffler cut off on mine and 4" pipe welded back in. With a 6" tip on the end...it's LOUD!

Hook that sumb!tch to a trailer, it gets real old after abut ten minutes on the highway.....

The MagnaFlow mellowed the sound out considerably. It no longer sounds like a V-twin motorcycle with cheap drag pipes.

__________________
2004.5 2500 4x4 Sport
QC/SB, BHAF, 4" Magnaflow 5" tip, 3" Procomp lift, 305/65/17 Procomp Xtreme A/T's on 17x9 Dick Cepek DC1's

[TXLawDawg]

Oh but I like it. Everyone I'm around says they can hear it waaaaay before I get there and that it sounds like a big rig, lol! I have considered maybe putting an Aero Turbine 4040 or 4040xl on there if I ever get tired of how loud it is...but I probably won't

__________________
2007 2500 5.9 4x4 3.73 48RE/ 20X10 Mazzi Hulk wheels with 305/55/20 Nitto TG's / 2" Coil Spacers / No muff No cat / Diablo Sport Predator / Quadzilla Commander / Silencer Ring and Torque Tube Baffling MIA