Dyno day info

[trik396]

Just got off the phone with ATR Motorsports.

The cost is $60 for 2 pulls. A third pull will cost you an extra $20 if you want it.

They want us there at 8am. If you're a little late, no problem. But don't be TOO late.

ATR is located at 550 N. Chicago, Joliet, IL. 60432

Lets get ready to roll some coal...

Also, there is a McDonalds and BurgerKing on rt53 about 5 minutes from the shop. Also a gas station that sells diesel fuel. We are good to go and I am psyched...

__________________
2005 DodgeRam2500 CTD/ 4x4/ BigHorn/ Autometer/AmsoilBypass/AemBruteforce
Trans by Goerend/ Walbro392custom fuel system/CAT2micfuelfilters/IISilver64/BanksIC
Projector HID's/DiablosportPredator/VanAaken3.2/QuadsXZT
617hp 1200+trq
KOREChasewFoxShox/Carli&FoxDualSteeringStabilizer/ NittoTerras285's
3 people can keep a secret if 2 of them are dead...

---

Last edited by trik396 : 05-09-2007 at 09:12 AM.

[dieseldon02]

YEAH BABY!!!!!

Too bad the race car aint running yet! See some BIG numbers there.

Anyone for puttin in a set of injectors while were there?

__________________
2002 LB Quad cab 2500,4X4, auto, grey/silver, f.p.,egt,boost, and trans temp,summit 4"exhaust w/muffler,Edge Comp,S&B cold air intake,FASS,275's,Pioneer AVIC-N2

[trik396]

Don, I'd be more than happy to lend a hand, but realize I have no idea how to actually do it to your 02'. And I'd hate for you to be stranded in Joliet if something went wrong...

__________________
2005 DodgeRam2500 CTD/ 4x4/ BigHorn/ Autometer/AmsoilBypass/AemBruteforce
Trans by Goerend/ Walbro392custom fuel system/CAT2micfuelfilters/IISilver64/BanksIC
Projector HID's/DiablosportPredator/VanAaken3.2/QuadsXZT
617hp 1200+trq
KOREChasewFoxShox/Carli&FoxDualSteeringStabilizer/ NittoTerras285's
3 people can keep a secret if 2 of them are dead...

[dieseldon02]

Originally Posted by trik396

Don, I'd be more than happy to lend a hand, but realize I have no idea how to actually do it to your 02'. And I'd hate for you to be stranded in Joliet if something went wrong...

Thanks Tony! I think Al would give me a ride! Jaymo said he knows how to do it, just need to know if hes gonna be there.

__________________
2002 LB Quad cab 2500,4X4, auto, grey/silver, f.p.,egt,boost, and trans temp,summit 4"exhaust w/muffler,Edge Comp,S&B cold air intake,FASS,275's,Pioneer AVIC-N2

[DORKWEED]

Can't wait guys!!! Like I said in an earlier post, be careful if you are coming from I-55!!! There is a lot of construction going on with the new I-355 south branch going in. For those coming from the city, take I-55 to Joliet Rd exit. Joliet Rd. merges into Rt. 53 several miles down. Take that into Joliet until you come to Ruby St. Turn left and go over the river and watch for Chicago St.; it'll be a right turn once you're over the river. Then just look for the shop!!

If you're coming up I-55 from the South, exit at Rt. 53 South. Then follow above directions!!

To those coming into Joliet from I-80, there has been too much new road construction for me to keep track of, ever since I've moved up North. But from what I remember, exit I-80 onto Rt. 53 North. You're on your own from there!!! Sorry!!

One more thing Dudes. Joliet in the old downtown area, like where the shop is, has many, many, many, ONE WAY STREETS!!!! So it is possible that you could be real close to the shop and have to go a ways around to get there legally!!! That's just a heads up for those who've not been to Joliet before!!

Looking forward to seeing and meeting you all!! Finally get to put a face onto the forum callname!!!

__________________
NRA LIFE MEMBER

[trik396]

Man.... I am pumped up too. Can't wait to meet all you guys and get to see what our trucks put out... It's gonna be a great time...

__________________
2005 DodgeRam2500 CTD/ 4x4/ BigHorn/ Autometer/AmsoilBypass/AemBruteforce
Trans by Goerend/ Walbro392custom fuel system/CAT2micfuelfilters/IISilver64/BanksIC
Projector HID's/DiablosportPredator/VanAaken3.2/QuadsXZT
617hp 1200+trq
KOREChasewFoxShox/Carli&FoxDualSteeringStabilizer/ NittoTerras285's
3 people can keep a secret if 2 of them are dead...

[dieseldon02]

Originally Posted by DORKWEED

Can't wait guys!!! Like I said in an earlier post, be careful if you are coming from I-55!!! There is a lot of construction going on with the new I-355 south branch going in. For those coming from the city, take I-55 to Joliet Rd exit. Joliet Rd. merges into Rt. 53 several miles down. Take that into Joliet until you come to Ruby St. Turn left and go over the river and watch for Chicago St.; it'll be a right turn once you're over the river. Then just look for the shop!!

If you're coming up I-55 from the South, exit at Rt. 53 South. Then follow above directions!!

To those coming into Joliet from I-80, there has been too much new road construction for me to keep track of, ever since I've moved up North. But from what I remember, exit I-80 onto Rt. 53 North. You're on your own from there!!! Sorry!!

One more thing Dudes. Joliet in the old downtown area, like where the shop is, has many, many, many, ONE WAY STREETS!!!! So it is possible that you could be real close to the shop and have to go a ways around to get there legally!!! That's just a heads up for those who've not been to Joliet before!!

Looking forward to seeing and meeting you all!! Finally get to put a face onto the forum callname!!!

Let me add something here, if you need to 630-809-0799, mycell number just in case some one needs directions.


Dorkweed, sorry to steal your quote.

__________________
2002 LB Quad cab 2500,4X4, auto, grey/silver, f.p.,egt,boost, and trans temp,summit 4"exhaust w/muffler,Edge Comp,S&B cold air intake,FASS,275's,Pioneer AVIC-N2

[glcebo]

Looks like I will be coming up for this. My 15 yo grandson is coming along as well. hope to have a good day.

Greg

__________________
2006 2500, 4X4, Larimie package, 48re, Westach Combo EGT/Boost Gauge, K&N intake tube,Amsoil filter, CFM+ intake,Quad race box, stacks

[jaymo]

Originally Posted by dieseldon02

Jaymo said he knows how to do it, just need to know if hes gonna be there.

OH YEAH Ill be there. Ill be sure to bring the tools well need. Shouldn't take but 30 minutes or so.
Did you get new orings, and washers. If not call Midwest injection and pick em up.

Is every one ready to see some shocked faces? These guy's are not going to know what hit them...



PS If my head is under the hood of Dons truck some one else has to make sure my son doesn't wreck anything.

__________________
2000 2wd 5spd , TsT/ez stack , afe stg 1 , rips 5" ,
Fassed , con FE , Jammers stg5. Ported head ,Oringed and studded.Dynod 444/834 on may 12 07
UNION CARPENTER AND PROUD OF IT

[dieseldon02]

COOOOOLLLL!!!!! Jay, the injectors came with new o-rings, and the copper washers, so we should be good to go. Ever install a J-hook?

__________________
2002 LB Quad cab 2500,4X4, auto, grey/silver, f.p.,egt,boost, and trans temp,summit 4"exhaust w/muffler,Edge Comp,S&B cold air intake,FASS,275's,Pioneer AVIC-N2

[jaymo]

No but cant be to hard.

__________________
2000 2wd 5spd , TsT/ez stack , afe stg 1 , rips 5" ,
Fassed , con FE , Jammers stg5. Ported head ,Oringed and studded.Dynod 444/834 on may 12 07
UNION CARPENTER AND PROUD OF IT

[whiterocket5.9]

pumped up here only thing im not lookin forward to is cleanin my truck out tomorrow....

__________________
05 dodge 2500 4x4 quad cab sb srw 5.9, 6-speed, 3.73,airaid intake, and 4"free flowin exauhst, p-pup link to my myspace page http://www.myspace.com/dodge50