IDAHO DYNO DAYS. meridian motorsports aug 26, 27

***MUDDY*** · 07-15-2006, 08:16 PM

Idaho Dyno Days Aug 26 And 27

--------------------------------------------------------------------------------

Attention Diesel Pickups:
Dodge Ram Turbo Diesel, Ford Powerstroke,
and Chevy Duramax owners…

Announcing: Boise Area’s 9th Diesel Pickup “Dyno Day”
Where: Meridian Motorsports, Meridian, ID

When: Saturday AUG 26, and Sunday AUG 27, 2006, 9:00 AM to ???

What: Here is an opportunity for diesel pickup owners to run their rigs on a DynoJet dynamometer to see what kind of power their rigs are actually putting to the ground. This event is open to all diesel owners. Trucks can be stock or modified (no studded tires, please).

Cost: Each session on the dyno is targeted for $45.00 for 3 runs.
Cost to redyno later in the day or the next day is $35.00 for 3 runs. For anyone who attends Saturday and doesn’t get to dyno due to time constraints, MMS will continue the dynoing on Sunday till all trucks are dynoed. If you arent able to attend Saturday come out Sunday. A BOMB party will be in progress throughout the weekend in the parking lot. Also a bbq is planned.

Details: This event is being coordinated by area Dodge Turbo Diesel owners (IDAHO BOMBERS), but, as indicated, is open to all diesel pickups. The owner will receive a print-out of the results of the session. Each session should take about 20 minutes.

More details on the event can be found on www.cumminsforum.com and the TDR www.turbodieselregister.com under the events sections on the forums and www.oilburners.net under event forums
Event location:

Meridian Motorsports
521 E. King St.
Meridian, ID 83642
887-2058

Directions: From the Meridian Exit on I-84, turn North toward Meridian; right (East) on E. Franklin Rd and go about ¼ mile; left (North) on E. 5th Ave. about 0.1 mile; right on King St. MMS is on your right.

For more info call Muddy at 208 739-2520. If no answer leave message. Also feel free to use the private message system on the forums.

The Idaho Bombers also meet for a monthly dinner meeting the 4th wed of each month at 7 pm at the Golden Corral in Nampa. We start arriving for a bs session and to admire each others trucks at 6:30 pm in the nw corner of the parking lot.

Attached Images

dyno97drw51005med.jpg (53.5 KB, 10 views)

__________________
for IDAHO discusion and events check www.idahobombersforum.com

Last edited by MUDDY : 07-15-2006 at 08:21 PM.

swank · 07-20-2006, 01:13 PM

sweet. maybe i'll be able to make that one. kinda doubt it though. hangin out in so. utard right now. we'll see.

MR4WLR · 07-20-2006, 01:19 PM

Hmmm, same day as Diesel Thunder in Spokane....

__________________
Corey Ritter - Amity, OR
'04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K
513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR
Hauls Lance "Lite" 1025 @4klbs
Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

Smokin Monster · 07-20-2006, 04:15 PM

I might just have to drive that direction that weekend.

cahammer · 07-20-2006, 05:16 PM

depends on how well the grain harvest goes and if we are done by then if we are we will see ya'll there

__________________
thanks to my sponser:www.Monster4x4performance.com

Sea01Cummer · 07-26-2006, 09:13 PM

Should be a good time, welcome back to the mainland Swank!!!

Steve

__________________

2001.5 Dodge 2500 CTD, 6 Speed, Leather,Headache Rack, Edge HOT Juice with Attitude,BD 130 HP Pulse Injectors, 4 inch Exhaust, FE Clutch,Vulcan Big Line Kit, IIS Super Phat Shaft 62/14, Swanker Intake Manifold,ATS Exhaust Manifold,ARP 12 MM Head Studs, HB High Idle Kit, 12v Marine .020 Headgasket. .

PICTURES

www.industrialinjection.com

Dynoed 505/1085 on 8/26/06 :woot2 with water-meth

Guns don't kill people.... Husbands that come home early kill people....

Don't Forget To Vote For ROTM

swank · 07-27-2006, 10:46 PM

back?!?!?! BAH! its freakin hot here dude. sure was fun driving the truck down to boise today though. back in the saddle. thing smokes now.

__________________
93w350. twins.

truck pics

swank · 08-14-2006, 04:23 PM

well, just got back from another trip to boise (from st george, utard. where i'm located for now). i thought i would be able to make the dyno day, but i don't know now. fuel went up .30 in three darn days. un-freakin-believable. anyway, hows it lookin for you guys?

__________________
93w350. twins.

truck pics

***Mopar1973Man*** · 08-14-2006, 09:13 PM

I'm not going to hold my breathe but I'm going to shoot for it...

Currently we have forest fires around us up here in Riggins, ID and I'm on stand-by. I might get called to by forestry...

With the price of diesel at $3.759 - $3.889... I'll be coming on my Goldwing and not the truck... But at least I might make it...

I'll play it by ear...

__________________

Michael Nelson - 2002 Dodge Cummins

Smokin Monster · 08-15-2006, 03:36 PM

I am still hoping to make it. Not sure, if diesel gets to $4 I don't think I'll make it.

cahammer · 08-16-2006, 08:48 AM

heres an idea trailer up your truck behind a buddys truck and split the cost you know him 70% you 30%

but grain harvest is about done so i am hopeing to make it does any one know if there are still dyno times avaible

__________________
thanks to my sponser:www.Monster4x4performance.com

Sea01Cummer · 08-16-2006, 02:49 PM

I'm really wantingto break 500 this time, not sure that i will make it.

Steve

__________________

2001.5 Dodge 2500 CTD, 6 Speed, Leather,Headache Rack, Edge HOT Juice with Attitude,BD 130 HP Pulse Injectors, 4 inch Exhaust, FE Clutch,Vulcan Big Line Kit, IIS Super Phat Shaft 62/14, Swanker Intake Manifold,ATS Exhaust Manifold,ARP 12 MM Head Studs, HB High Idle Kit, 12v Marine .020 Headgasket. .

PICTURES

www.industrialinjection.com

Dynoed 505/1085 on 8/26/06 :woot2 with water-meth

Guns don't kill people.... Husbands that come home early kill people....

Don't Forget To Vote For ROTM

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

07-20-2006, 01:13 PM	#2 (permalink)
swank Cummins Enthusiast Join Date: Dec 2005 Location: bellevue, id Posts: 163 swank's Truck Pics	sweet. maybe i'll be able to make that one. kinda doubt it though. hangin out in so. utard right now. we'll see.

07-20-2006, 01:19 PM	#3 (permalink)
MR4WLR Administrator Join Date: Feb 2006 Location: Amity, OR Posts: 3,718 MR4WLR's Truck Pics	Hmmm, same day as Diesel Thunder in Spokane.... __________________ Corey Ritter - Amity, OR '04 Patriot Blue SRW 3500 QC 4X4 Laramie, 6spd, HO, Edge EZ, TST PowerMAXCR, Smarty, SPS 66, Rip's 4", AFE PG7 W/torque tube, FASS 150, Superlift leveling kit, Ride Rite's w/onboard air, Line-X. Torklift camper tie downs, fuel vent mod, CB, GPSmap 168, Buckstop/Warn 12,000 lb, KC Daylighters, MTL w/prolong in trans, Haisley DD, DiPricol gauges and Quad Commander. 77K 513/1043 Fast Specialties DDD 4-15-2006 TST-EZ stack, Quickest 1/4 mile ET 13.949 @ 96 MPH @ PIR Hauls Lance "Lite" 1025 @4klbs Wifes truck '98 Intense Blue 12V QC LB 4X4 Auto

07-20-2006, 04:15 PM	#4 (permalink)
Smokin Monster Cummins Fan Join Date: Feb 2006 Posts: 88 Smokin Monster's Truck Pics	I might just have to drive that direction that weekend.

07-20-2006, 05:16 PM	#5 (permalink)
cahammer Cummins Enthusiast Join Date: Feb 2006 Location: Paul, Idaho Posts: 273 cahammer's Truck Pics	depends on how well the grain harvest goes and if we are done by then if we are we will see ya'll there __________________ thanks to my sponser:www.Monster4x4performance.com

07-26-2006, 09:13 PM	#6 (permalink)
Sea01Cummer Diesel Freak Join Date: Dec 2005 Location: South West Idaho Posts: 839 Sea01Cummer's Truck Pics	Should be a good time, welcome back to the mainland Swank!!! Steve __________________ 2001.5 Dodge 2500 CTD, 6 Speed, Leather,Headache Rack, Edge HOT Juice with Attitude,BD 130 HP Pulse Injectors, 4 inch Exhaust, FE Clutch,Vulcan Big Line Kit, IIS Super Phat Shaft 62/14, Swanker Intake Manifold,ATS Exhaust Manifold,ARP 12 MM Head Studs, HB High Idle Kit, 12v Marine .020 Headgasket. . PICTURES www.industrialinjection.com Dynoed 505/1085 on 8/26/06 :woot2 with water-meth Guns don't kill people.... Husbands that come home early kill people.... Don't Forget To Vote For ROTM

07-27-2006, 10:46 PM	#7 (permalink)
swank Cummins Enthusiast Join Date: Dec 2005 Location: bellevue, id Posts: 163 swank's Truck Pics	back?!?!?! BAH! its freakin hot here dude. sure was fun driving the truck down to boise today though. back in the saddle. thing smokes now. __________________ 93w350. twins. truck pics

08-14-2006, 04:23 PM	#8 (permalink)
swank Cummins Enthusiast Join Date: Dec 2005 Location: bellevue, id Posts: 163 swank's Truck Pics	well, just got back from another trip to boise (from st george, utard. where i'm located for now). i thought i would be able to make the dyno day, but i don't know now. fuel went up .30 in three darn days. un-freakin-believable. anyway, hows it lookin for you guys? __________________ 93w350. twins. truck pics

08-14-2006, 09:13 PM	#9 (permalink)
*Mopar1973Man* 2 Cycle Oil Guru Join Date: Feb 2006 Posts: 5,341 Mopar1973Man's Truck Pics	I'm not going to hold my breathe but I'm going to shoot for it... Currently we have forest fires around us up here in Riggins, ID and I'm on stand-by. I might get called to by forestry... With the price of diesel at $3.759 - $3.889... I'll be coming on my Goldwing and not the truck... But at least I might make it... I'll play it by ear... __________________ Michael Nelson - 2002 Dodge Cummins

08-15-2006, 03:36 PM	#10 (permalink)
Smokin Monster Cummins Fan Join Date: Feb 2006 Posts: 88 Smokin Monster's Truck Pics	I am still hoping to make it. Not sure, if diesel gets to $4 I don't think I'll make it.

08-16-2006, 08:48 AM	#11 (permalink)
cahammer Cummins Enthusiast Join Date: Feb 2006 Location: Paul, Idaho Posts: 273 cahammer's Truck Pics	heres an idea trailer up your truck behind a buddys truck and split the cost you know him 70% you 30% but grain harvest is about done so i am hopeing to make it does any one know if there are still dyno times avaible __________________ thanks to my sponser:www.Monster4x4performance.com

08-16-2006, 02:49 PM	#12 (permalink)
Sea01Cummer Diesel Freak Join Date: Dec 2005 Location: South West Idaho Posts: 839 Sea01Cummer's Truck Pics	I'm really wantingto break 500 this time, not sure that i will make it. Steve __________________ 2001.5 Dodge 2500 CTD, 6 Speed, Leather,Headache Rack, Edge HOT Juice with Attitude,BD 130 HP Pulse Injectors, 4 inch Exhaust, FE Clutch,Vulcan Big Line Kit, IIS Super Phat Shaft 62/14, Swanker Intake Manifold,ATS Exhaust Manifold,ARP 12 MM Head Studs, HB High Idle Kit, 12v Marine .020 Headgasket. . PICTURES www.industrialinjection.com Dynoed 505/1085 on 8/26/06 :woot2 with water-meth Guns don't kill people.... Husbands that come home early kill people.... Don't Forget To Vote For ROTM