Clutch install

[bh10]

Hey guys, I just got a 06 2500 w/ a 6 speed, Im going to started modding it pretty good, so I want to get Dual Disk clutch installed, I called a couple of shops and no one will mess w/ it. Anybody know any shops around Atlanta or N. Georgia to do the install? I called Garmon, but he wanted double from what I hear the average should be. Or if anybody wants too drink some beverages and have a wrench party, that would be great to.

__________________
06 2500 4x4, White, SLT, 6speed, straight piped, 315/70 BFGs, Smarty, Isspro's, SBC DD, AirDog 150, E. H. Injectors

[gildere]

Where are you located at in N. GA? Me and my cousins intstalled my SPEC double disc a couple months ago.


Eddy

__________________
2007 QC SLT 4x4, 5.9 CTD G56. Geno's Muffler Delete Pipe, Cat replaced with 4" flex, AFE Torque Tube, what silencer ring, SMARTY, Commander w/ fuel press, and a SPEC double disc...

[bh10]

Originally Posted by gildere

Where are you located at in N. GA? Me and my cousins intstalled my SPEC double disc a couple months ago.


Eddy

Roswell about 5min off 400

__________________
06 2500 4x4, White, SLT, 6speed, straight piped, 315/70 BFGs, Smarty, Isspro's, SBC DD, AirDog 150, E. H. Injectors

[gildere]

.. I am currently in OKC right now for schooling. I will be here until August, otherwise I would tell you we could do it. If you can stand to wait that long, we can help you with it. You know what I will call my cousin that works at the shop we used and see what he would do it for. He was my main help when we did mine. To keep the cost to you down I am sure he would have you come up there to work on it Saturday evening. It wasn't a hard job you just need tools and a trans jack. We did mine on a lift and I don't see how people do this on their backs! We also left the xfer case on though.

Eddy

__________________
2007 QC SLT 4x4, 5.9 CTD G56. Geno's Muffler Delete Pipe, Cat replaced with 4" flex, AFE Torque Tube, what silencer ring, SMARTY, Commander w/ fuel press, and a SPEC double disc...

[south bend clutch]

Try Hammer Down Diesel in Gay, Ga.

Ph. # is 770-468-4159

Peter

[bh10]

Originally Posted by gildere

.. I am currently in OKC right now for schooling. I will be here until August, otherwise I would tell you we could do it. If you can stand to wait that long, we can help you with it. You know what I will call my cousin that works at the shop we used and see what he would do it for. He was my main help when we did mine. To keep the cost to you down I am sure he would have you come up there to work on it Saturday evening. It wasn't a hard job you just need tools and a trans jack. We did mine on a lift and I don't see how people do this on their backs! We also left the xfer case on though.

Eddy

Awsome, let me know

__________________
06 2500 4x4, White, SLT, 6speed, straight piped, 315/70 BFGs, Smarty, Isspro's, SBC DD, AirDog 150, E. H. Injectors

[south bend clutch]

Also...

AMPHIL PRODUCTS
206 SHAW ST.
GALAX, VA 24333

Ph # 276-236-6969

Peter

[bh10]

Originally Posted by south bend clutch

Try Hammer Down Diesel in Gay, Ga.

Ph. # is 770-468-4159

Peter

Yea ever since I first pm'ed you, Ive been trying to get a hold of them w/ no luck, I know you said Garmon, but he wants some serious coin to install. If I cant getting anything worked out in my general area, Ill be going to go w/ Gus @ FBD he has good prices and can do it in a day, the only thing is he's 4 hrs away, but I do need to get some other goodies from him, so it might be a good excuse to go over there.

__________________
06 2500 4x4, White, SLT, 6speed, straight piped, 315/70 BFGs, Smarty, Isspro's, SBC DD, AirDog 150, E. H. Injectors

[bh10]

Originally Posted by south bend clutch

Also...

AMPHIL PRODUCTS
206 SHAW ST.
GALAX, VA 24333

Ph # 276-236-6969

Peter

Boy thats a little to far, thanks though

__________________
06 2500 4x4, White, SLT, 6speed, straight piped, 315/70 BFGs, Smarty, Isspro's, SBC DD, AirDog 150, E. H. Injectors

[south bend clutch]

Originally Posted by bh10

Yea ever since I first pm'ed you, Ive been trying to get a hold of them w/ no luck, I know you said Garmon, but he wants some serious coin to install. If I cant getting anything worked out in my general area, Ill be going to go w/ Gus @ FBD he has good prices and can do it in a day, the only thing is he's 4 hrs away, but I do need to get some other goodies from him, so it might be a good excuse to go over there.

Oops...forgot about them.

Peter

[CTDFan5.9]

Try Leadfoot diesel in Loganville, GA