Dyno Day

**carolinarednek** · 09-20-2007, 06:25 PM

Okay guys, I am in South Carolina. I have been talking to Tread, and we are putting together a dyno day in Anderson S.C. It's going to be right off of Clemson Blvd. All you need to do is take 85N to exit 19A. Go towards anderson. When you see the Ford dealership on the left, take a right.Then make another right onto Walker Drive. The shop is called Amazon Tuning Solutions. The lady I talked to said it was the building with all the yellow posts out front. If you will, if you're interested, send me a PM and let me know when you're available. I need to reserve a day in advance. BTW, the cost is $50.00 for 2 pulls.

__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

Drew · 09-20-2007, 08:28 PM

what ever day ya'll decide I may show up if I can get some time

__________________
04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty
10/20/07 425hp 798tq still on the stock clutch, how much longer will she last

Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

MRaynor · 09-21-2007, 05:42 AM

Whatever day you decide is good for me. I know where the place is you are talking about and that should not be too bad of a drive for the GA guys either.

__________________
Mike

05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

**carolinarednek** · 09-21-2007, 09:11 PM

Okay, I stopped by there today and I've got some dates. We can choose from 3.
Oct. 20 or Oct 27 or Nov.17. I told her that we would probably like the Oct. 20 date. There's another group coming in and she thought that they would be taking the 20th date. They were supposed to let her know. Nothing as of 2:30 today. But anyway, kick those dates around and let me know what works best for you and we'll see about getting a date reserved. If the turnout is good, I might see about making this an annual event!

Also, this does not have to be a diesel only day. If you have a gas sucker, then bring it on! We can always cover it in soot!

__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

**Tread Heavy** · 09-25-2007, 08:25 AM

I'm in for the 17th of November

The other dates I will be out of town.

__________________

RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd

**carolinarednek** · 09-25-2007, 05:29 PM

Well I'm sorry to hear that tread. She called me and confirmed the Oct. 20 date. It will be at 10:00am. If any of you other guys can make it, please feel free to show up. I need at least 10 trucks to get the day. So far I've heard from 3 in the SC thread. If you can make it, please let me know. If you have any questions, please feel free to contact Lynn at ATS @ 864 3320955. Thanks in advace for your participation!!!!

Brian

__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

**carolinarednek** · 10-02-2007, 08:08 PM

Is there anybody else interested?

__________________
South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/
1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake
280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

Drew · 10-17-2007, 08:34 PM

I'll be there. . .any other GA boys gunna show. . .apparently theres gunna be a sled pull after the dyno.

__________________
04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty
10/20/07 425hp 798tq still on the stock clutch, how much longer will she last

Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

09-20-2007, 06:25 PM	#1 (permalink)
carolinarednek SC Chapter Co-President Join Date: Jun 2007 Location: Liberty, S.C. Posts: 658 carolinarednek's Truck Pics	Dyno Day Okay guys, I am in South Carolina. I have been talking to Tread, and we are putting together a dyno day in Anderson S.C. It's going to be right off of Clemson Blvd. All you need to do is take 85N to exit 19A. Go towards anderson. When you see the Ford dealership on the left, take a right.Then make another right onto Walker Drive. The shop is called Amazon Tuning Solutions. The lady I talked to said it was the building with all the yellow posts out front. If you will, if you're interested, send me a PM and let me know when you're available. I need to reserve a day in advance. BTW, the cost is $50.00 for 2 pulls. __________________ South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/ 1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake 280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-20-2007, 08:28 PM	#2 (permalink)
Drew Tech Specialist Join Date: Apr 2006 Location: Fayetteville Ga Posts: 1,112 Drew's Truck Pics	what ever day ya'll decide I may show up if I can get some time __________________ 04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty 10/20/07 425hp 798tq still on the stock clutch, how much longer will she last Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

09-21-2007, 05:42 AM	#3 (permalink)
MRaynor Diesel Freak Join Date: Jul 2006 Location: Chapin, SC Posts: 870 MRaynor's Truck Pics	Whatever day you decide is good for me. I know where the place is you are talking about and that should not be too bad of a drive for the GA guys either. __________________ Mike 05 2500 CTD 4x4 LB Quad, Autometer ultralite pyro and 60# boost gauges on A pillar, Quadzilla Monster Intake, Howards cool down timer, SS nerf bars, fire & ice light bar on the rear, Recon amber LEDs under the cab, 5" miter cut stacks with no muff and 285/70/17 BFG AT/KOs.

09-21-2007, 09:11 PM	#4 (permalink)
carolinarednek SC Chapter Co-President Join Date: Jun 2007 Location: Liberty, S.C. Posts: 658 carolinarednek's Truck Pics	Okay, I stopped by there today and I've got some dates. We can choose from 3. Oct. 20 or Oct 27 or Nov.17. I told her that we would probably like the Oct. 20 date. There's another group coming in and she thought that they would be taking the 20th date. They were supposed to let her know. Nothing as of 2:30 today. But anyway, kick those dates around and let me know what works best for you and we'll see about getting a date reserved. If the turnout is good, I might see about making this an annual event! Also, this does not have to be a diesel only day. If you have a gas sucker, then bring it on! We can always cover it in soot! __________________ South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/ 1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake 280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

09-25-2007, 08:25 AM	#5 (permalink)
Tread Heavy Slow from the get Go 6spd Join Date: Oct 2006 Location: Georgia Posts: 580 Tread Heavy's Truck Pics	I'm in for the 17th of November The other dates I will be out of town. __________________ RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd

09-25-2007, 05:29 PM	#6 (permalink)
carolinarednek SC Chapter Co-President Join Date: Jun 2007 Location: Liberty, S.C. Posts: 658 carolinarednek's Truck Pics	Well I'm sorry to hear that tread. She called me and confirmed the Oct. 20 date. It will be at 10:00am. If any of you other guys can make it, please feel free to show up. I need at least 10 trucks to get the day. So far I've heard from 3 in the SC thread. If you can make it, please let me know. If you have any questions, please feel free to contact Lynn at ATS @ 864 3320955. Thanks in advace for your participation!!!! Brian __________________ South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/ 1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake 280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

10-02-2007, 08:08 PM	#7 (permalink)
carolinarednek SC Chapter Co-President Join Date: Jun 2007 Location: Liberty, S.C. Posts: 658 carolinarednek's Truck Pics	Is there anybody else interested? __________________ South Carolina Chapter Co-President http://www.cumminsforum.com/forum/south-carolina/ 1996 Dually 4x4, auto with BD valve body and torque-lok, banks twin ram, no plate, BHAF, Cummins exhaust brake 280.03 RWHP/682.93 TORQUE on David Dunbar's Dyno

10-17-2007, 08:34 PM	#8 (permalink)
Drew Tech Specialist Join Date: Apr 2006 Location: Fayetteville Ga Posts: 1,112 Drew's Truck Pics	I'll be there. . .any other GA boys gunna show. . .apparently theres gunna be a sled pull after the dyno. __________________ 04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty 10/20/07 425hp 798tq still on the stock clutch, how much longer will she last Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!