Georgia Chapter, Check in Guys - Page 11

**Tread Heavy** · 10-23-2007, 07:53 AM

Well I should have known someone would have do be difficult

So what you are saing is the two door is more important that the Dodge

__________________

RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd

wrglrroper · 10-24-2007, 04:38 AM

NO not me I would never say that

But, on the other hand the money I might be able to make from selling the 55 front end might be.

2005workbody · 10-24-2007, 11:32 AM

So where is this meet gonna be?

__________________
2005 Ram 2500 Quad Cab-Long Bed (Special Work Trim) 4x4 5.9L 48RE trans. 4" straight exhaust, DiabloSport Programmer - Economy Mode, Custom 4" Intake w/ K&N filter.

Jaxn51 · 10-24-2007, 06:31 PM

Quote:

Originally Posted by wrglrroper

The weekend of the 18th is the moultrie swap meet. I probably would not be able to make it that weekend.

25th is Thanksgiving weekend and I will be out of town visiting relatives during that time.

__________________
2002 3500 QC/DRW, HO, 6-spd, 2WD, van Aaken V-5, New VP44@144k mi., Holley Black pusher, Vulcan Big Line kit, RECON gauges, BD low fuel pressure LED, S&B Cool Air Intake, PacBrake, Jordan Ultima, Bilstein suspenders. 2005 32' Vortex/Viper 5th-Wheel Toyhauler

cummin hard · 10-25-2007, 07:58 PM

18th is good, where? north end or south? lets git this thing rollin. im for north side but im ready to see some of these trucks, i have lots of questions that i would like to see the answer.

__________________
2006 Silver 3500 Big Horn, DRW, 4x4, QC, SLT, 5.9L, silencer ring removed, gutted intake tube, stock muffler cut out, replaced with 4" flex

Shilohsho · 10-25-2007, 08:10 PM

Hey, If you GA boys get into anything good let us SC boys know. Maybe we can have an even better turn-out. THe Dyno Day we just had in Anderson was good but there was room for more of ya'll there!

__________________
'99 3500 Slvr drw quad cab 4x4 5spd 4.10s, Van Aaken box, Banks Brake, 4" exhaust, K&N Cone, SouthBend Con OFE,KDP-killed!, Frame Mounted Carter Pump, Boost/Pyro Guages, Leveling Bags on rear, Onboard Air , Welded 5th gear nut 234hp/579tq 2/2/08

MadMaXxX · 10-28-2007, 08:38 AM

aiight guys..... so lets see what kinda meet we can get going!?! i have a few buddys that wanna do a dodge truck meet..... but at the same time i do wanna get just a diesel meet going..... lets figure a time thats best..... i know its gonna get harder and harder to get a meet going till next year if anything due to the holiday season coming up but lets see what we can get rolling

i think our best day is gonna be a sunday unless its a night or afternoon meet then maybe sat night so we can get rowdy at a bar

but the date is what i would like to know....

thanx
chris

PM me for other info

__________________
if ya aint blowin' ya aint goin!!
04.5 2500 offroad edition, dark grey. 35in cooper discoverer STT mud terrains, BDTD with outlook **sold**

MadMaXxX · 11-01-2007, 01:48 PM

anyone? i still havent heard anything yet

come on guys!!

__________________
if ya aint blowin' ya aint goin!!
04.5 2500 offroad edition, dark grey. 35in cooper discoverer STT mud terrains, BDTD with outlook **sold**

Drew · 11-01-2007, 03:10 PM

depending on when and where I'll show up for a little bit. . .I need to get over to Summit and pick stuff up for my yoda

__________________
04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty
10/20/07 425hp 798tq still on the stock clutch, how much longer will she last

Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

wrglrroper · 11-01-2007, 06:35 PM

O.K. Drew I'll fax you a list of stuff I need, and I'll get with you on payment later.

4 wheelssmoking · 11-01-2007, 07:28 PM

shop day at Garmons garage on saturday november 3rd

**Tread Heavy** · 11-01-2007, 07:29 PM

Ok Summit sounds good to me

If everybody agrees on that the I will set up a poll and we can set a date. Man i cant wait.

__________________

RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-23-2007, 07:53 AM	#121 (permalink)
Tread Heavy Slow from the get Go 6spd Join Date: Oct 2006 Location: Georgia Posts: 580 Tread Heavy's Truck Pics	Well I should have known someone would have do be difficult So what you are saing is the two door is more important that the Dodge __________________ RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-24-2007, 04:38 AM	#122 (permalink)
wrglrroper Cummins Fanatic Join Date: Jul 2006 Posts: 110 wrglrroper's Truck Pics	NO not me I would never say that But, on the other hand the money I might be able to make from selling the 55 front end might be.

10-24-2007, 11:32 AM	#123 (permalink)
2005workbody Newbie Join Date: Sep 2007 Posts: 21 2005workbody's Truck Pics	So where is this meet gonna be? __________________ 2005 Ram 2500 Quad Cab-Long Bed (Special Work Trim) 4x4 5.9L 48RE trans. 4" straight exhaust, DiabloSport Programmer - Economy Mode, Custom 4" Intake w/ K&N filter.

10-25-2007, 07:58 PM	#125 (permalink)
cummin hard Cummins Fanatic Join Date: Sep 2007 Location: Cumming, GA Posts: 120 cummin hard's Truck Pics	18th is good, where? north end or south? lets git this thing rollin. im for north side but im ready to see some of these trucks, i have lots of questions that i would like to see the answer. __________________ 2006 Silver 3500 Big Horn, DRW, 4x4, QC, SLT, 5.9L, silencer ring removed, gutted intake tube, stock muffler cut out, replaced with 4" flex

10-25-2007, 08:10 PM	#126 (permalink)
Shilohsho Cummins Fan Join Date: Oct 2007 Location: Seneca, SC Posts: 50 Shilohsho's Truck Pics	Hey, If you GA boys get into anything good let us SC boys know. Maybe we can have an even better turn-out. THe Dyno Day we just had in Anderson was good but there was room for more of ya'll there! __________________ '99 3500 Slvr drw quad cab 4x4 5spd 4.10s, Van Aaken box, Banks Brake, 4" exhaust, K&N Cone, SouthBend Con OFE,KDP-killed!, Frame Mounted Carter Pump, Boost/Pyro Guages, Leveling Bags on rear, Onboard Air , Welded 5th gear nut 234hp/579tq 2/2/08

10-28-2007, 08:38 AM	#127 (permalink)
MadMaXxX Cummins Fan Join Date: Oct 2007 Location: alpharetta ga Posts: 60 MadMaXxX's Truck Pics	aiight guys..... so lets see what kinda meet we can get going!?! i have a few buddys that wanna do a dodge truck meet..... but at the same time i do wanna get just a diesel meet going..... lets figure a time thats best..... i know its gonna get harder and harder to get a meet going till next year if anything due to the holiday season coming up but lets see what we can get rolling i think our best day is gonna be a sunday unless its a night or afternoon meet then maybe sat night so we can get rowdy at a bar but the date is what i would like to know.... thanx chris PM me for other info __________________ if ya aint blowin' ya aint goin!! 04.5 2500 offroad edition, dark grey. 35in cooper discoverer STT mud terrains, BDTD with outlook sold

11-01-2007, 01:48 PM	#128 (permalink)
MadMaXxX Cummins Fan Join Date: Oct 2007 Location: alpharetta ga Posts: 60 MadMaXxX's Truck Pics	anyone? i still havent heard anything yet come on guys!! __________________ if ya aint blowin' ya aint goin!! 04.5 2500 offroad edition, dark grey. 35in cooper discoverer STT mud terrains, BDTD with outlook sold

11-01-2007, 03:10 PM	#129 (permalink)
Drew Tech Specialist Join Date: Apr 2006 Location: Fayetteville Ga Posts: 1,112 Drew's Truck Pics	depending on when and where I'll show up for a little bit. . .I need to get over to Summit and pick stuff up for my yoda __________________ 04.5 6spd QC 4x4 4.10's line-x on the rockers, TST, smarty 10/20/07 425hp 798tq still on the stock clutch, how much longer will she last Many Thanks to David and the guy's at James O'neal Dodge, you guy's ROCK!!!

11-01-2007, 06:35 PM	#130 (permalink)
wrglrroper Cummins Fanatic Join Date: Jul 2006 Posts: 110 wrglrroper's Truck Pics	O.K. Drew I'll fax you a list of stuff I need, and I'll get with you on payment later.

11-01-2007, 07:28 PM	#131 (permalink)
4 wheelssmoking Newbie Join Date: Oct 2007 Location: jackson GA Posts: 7 4 wheelssmoking's Truck Pics	shop day at Garmons garage on saturday november 3rd

11-01-2007, 07:29 PM	#132 (permalink)
Tread Heavy Slow from the get Go 6spd Join Date: Oct 2006 Location: Georgia Posts: 580 Tread Heavy's Truck Pics	Ok Summit sounds good to me If everybody agrees on that the I will set up a poll and we can set a date. Man i cant wait. __________________ RED04.5 Quad Cab 3500 4x4 SRW SWB NV5600 6 speed with SB OFE, 3.73's, K&N intake, Banks Six Gun with Speed Loader, Boost Gauge, Pyrometer, Muffler and Silencer Ring MIA, 4 inch Superlift, 18'' American Racing Wolverines with 35x12.50x18 Nitto Mud Grapplers rapped around them, tailgate spoiler like the 07's have, Black tool box and Brush Gaurd