Where are the fast dually's?

pikeman16 · 10-08-2008, 03:53 PM

It seems any video i watch of a fast truck its a SRW axle. haven't really found any dually trucks. are they that much harder to go as fast? or do you not see them as much because most people don't need that big a truck, and if they do, they generally aren't racing it? Are there 11, 12, 13 second duallys? do they need any more HP/TQ to do it than their smaller brothers?

__________________
2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

***Hot Stuff*** · 10-08-2008, 04:03 PM

Brian's truck "should" be!!!!

Not sure if it is though!

__________________

'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars

Adam---Proud member of the OHIO COAL ROLLERS

white99 · 10-08-2008, 04:07 PM

only fast dually ive seen was the white n red 2wd one in diesel power...10seconds badA$$

__________________

rebuilt trans2X,BDtc 315/75/16 procomps 2"spacer traction bars..bent n trashed-D80 Diff rebuilt.truck in shop for the 4TH TIME.trans likes to break..400/800 as of Fall Brawl truck went to hell since then..musta got bit by big blue...

***jackblack99*** · 10-08-2008, 04:07 PM

i saw a guy from oklahoma named brian carter in diesel power... his 3rd gen dually hauled A**!!!!

__________________
99 3500 sport, 9 in lift and 17' KMC Rockstars and 37" Cooper STT's. Edge Comp, BHAF, Airdog 150, autometer ultralite 2's, 4in turbo back(home made) to 7in miter cut, home made traction bars........coming soon ....Scheid Lightning 2's and a built trans when i get my quad sold.

pikeman16 · 10-08-2008, 04:28 PM

so then why does no one go for the dually? like stated does it just take that much more power to get it at the same speeds? How much does a extended cab full size bed truck weigh compared to one that is the same setup, but has a dually axle?

__________________
2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

***Babyfat*** · 10-08-2008, 04:30 PM

myself and BBRAM will be going to the track again (soon), he already has a 13.4 under his belt, tough for a 8k truck to get really fast but I think low-mid 12's for dd'rs is pretty good.

Milan here we come !!!!

__________________
(her's)2000 drw, quadcab lb, hx40/ht4c twins,180's, dtt, edge com, tst pm3, fuelboss, 6" miters
(mine)2006 drw, quad cab lb, handshaker, 6" miters, smarty jr
(sons)1997 quad cab, 5 sp, longbox, stock
(shop)2004.5 quad cab, sb, stock

pikeman16 · 10-08-2008, 04:41 PM

ah ok. or wait, is it just simply that you are trying to turn 4 wheels on that rear axle, instead of just 2?

__________________
2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

***Hot Stuff*** · 10-08-2008, 04:43 PM

That extra weight doesn't help the matter. All the extra rotational mass to get moving is tough.

__________________

'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars

Adam---Proud member of the OHIO COAL ROLLERS

**Chris Mallett** · 10-08-2008, 04:44 PM

I hope mine will run pretty good, but I only have 200 miles on the new engine so far...

__________________
2005 QC LB Dually, 4x4, F1 Helix 2 Cam, Sportsman springs, Fluidampnr, Edge Juice w/Attitude, Smarty, S&B Cold air intake, Needing tranny goodies badly.

Check out the West Virginia Cummins Crew

***Babyfat*** · 10-08-2008, 04:45 PM

Here for your viewing enjoyment 3 fast duallies

__________________
(her's)2000 drw, quadcab lb, hx40/ht4c twins,180's, dtt, edge com, tst pm3, fuelboss, 6" miters
(mine)2006 drw, quad cab lb, handshaker, 6" miters, smarty jr
(sons)1997 quad cab, 5 sp, longbox, stock
(shop)2004.5 quad cab, sb, stock

pikeman16 · 10-08-2008, 04:46 PM

ok so now i'm confused. i found an article online and they said that a 2006 quad cab 4x4 dually with a 8 foot bed only weighed 7204? i was told the SRW trucks with the same setup weighed about 7400 lbs?

__________________
2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

***Hot Stuff*** · 10-08-2008, 04:54 PM

Hell, my truck without me in it, full of fuel, is like 7700#.

__________________

'03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars

Adam---Proud member of the OHIO COAL ROLLERS

10-08-2008, 03:53 PM	#1 (permalink)
pikeman16 Cummins Nut Join Date: Aug 2008 Posts: 307 pikeman16's Truck Pics	Where are the fast dually's? It seems any video i watch of a fast truck its a SRW axle. haven't really found any dually trucks. are they that much harder to go as fast? or do you not see them as much because most people don't need that big a truck, and if they do, they generally aren't racing it? Are there 11, 12, 13 second duallys? do they need any more HP/TQ to do it than their smaller brothers? __________________ 2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

10-08-2008, 04:03 PM	#2 (permalink)
*Hot Stuff* Smokin' Join Date: Dec 2007 Location: Republic, Ohio Posts: 2,544 Hot Stuff's Truck Pics	Brian's truck "should" be!!!! Not sure if it is though! __________________ '03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars Adam---Proud member of the OHIO COAL ROLLERS

10-08-2008, 04:07 PM	#3 (permalink)
white99 Diesel Freak Join Date: Dec 2007 Location: jersey Posts: 792 white99's Truck Pics	only fast dually ive seen was the white n red 2wd one in diesel power...10seconds badA$$ __________________ rebuilt trans2X,BDtc 315/75/16 procomps 2"spacer traction bars..bent n trashed-D80 Diff rebuilt.truck in shop for the 4TH TIME.trans likes to break..400/800 as of Fall Brawl truck went to hell since then..musta got bit by big blue...

10-08-2008, 04:07 PM	#4 (permalink)
*jackblack99* Diesel Freak Join Date: Jul 2008 Location: Indiana Posts: 995 jackblack99's Truck Pics	i saw a guy from oklahoma named brian carter in diesel power... his 3rd gen dually hauled A**!!!! __________________ 99 3500 sport, 9 in lift and 17' KMC Rockstars and 37" Cooper STT's. Edge Comp, BHAF, Airdog 150, autometer ultralite 2's, 4in turbo back(home made) to 7in miter cut, home made traction bars........coming soon ....Scheid Lightning 2's and a built trans when i get my quad sold.

10-08-2008, 04:28 PM	#5 (permalink)
pikeman16 Cummins Nut Join Date: Aug 2008 Posts: 307 pikeman16's Truck Pics	so then why does no one go for the dually? like stated does it just take that much more power to get it at the same speeds? How much does a extended cab full size bed truck weigh compared to one that is the same setup, but has a dually axle? __________________ 2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

10-08-2008, 04:30 PM	#6 (permalink)
*Babyfat* just taking up space Join Date: Nov 2005 Location: GRASS LAKE, MI Posts: 1,848 Babyfat's Truck Pics	myself and BBRAM will be going to the track again (soon), he already has a 13.4 under his belt, tough for a 8k truck to get really fast but I think low-mid 12's for dd'rs is pretty good. Milan here we come !!!! __________________ (her's)2000 drw, quadcab lb, hx40/ht4c twins,180's, dtt, edge com, tst pm3, fuelboss, 6" miters (mine)2006 drw, quad cab lb, handshaker, 6" miters, smarty jr (sons)1997 quad cab, 5 sp, longbox, stock (shop)2004.5 quad cab, sb, stock

10-08-2008, 04:41 PM	#7 (permalink)
pikeman16 Cummins Nut Join Date: Aug 2008 Posts: 307 pikeman16's Truck Pics	ah ok. or wait, is it just simply that you are trying to turn 4 wheels on that rear axle, instead of just 2? __________________ 2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

10-08-2008, 04:43 PM	#8 (permalink)
*Hot Stuff* Smokin' Join Date: Dec 2007 Location: Republic, Ohio Posts: 2,544 Hot Stuff's Truck Pics	That extra weight doesn't help the matter. All the extra rotational mass to get moving is tough. __________________ '03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars Adam---Proud member of the OHIO COAL ROLLERS

10-08-2008, 04:44 PM	#9 (permalink)
Chris Mallett West Virginia Chapter President. Join Date: Jan 2008 Location: Craigsville, WV Posts: 1,871 Chris Mallett's Truck Pics	I hope mine will run pretty good, but I only have 200 miles on the new engine so far... __________________ 2005 QC LB Dually, 4x4, F1 Helix 2 Cam, Sportsman springs, Fluidampnr, Edge Juice w/Attitude, Smarty, S&B Cold air intake, Needing tranny goodies badly. Check out the West Virginia Cummins Crew

10-08-2008, 04:45 PM	#10 (permalink)
*Babyfat* just taking up space Join Date: Nov 2005 Location: GRASS LAKE, MI Posts: 1,848 Babyfat's Truck Pics	Here for your viewing enjoyment 3 fast duallies __________________ (her's)2000 drw, quadcab lb, hx40/ht4c twins,180's, dtt, edge com, tst pm3, fuelboss, 6" miters (mine)2006 drw, quad cab lb, handshaker, 6" miters, smarty jr (sons)1997 quad cab, 5 sp, longbox, stock (shop)2004.5 quad cab, sb, stock

10-08-2008, 04:46 PM	#11 (permalink)
pikeman16 Cummins Nut Join Date: Aug 2008 Posts: 307 pikeman16's Truck Pics	ok so now i'm confused. i found an article online and they said that a 2006 quad cab 4x4 dually with a 8 foot bed only weighed 7204? i was told the SRW trucks with the same setup weighed about 7400 lbs? __________________ 2006 3500 Future plans: Pyro, Rail pressure, Boost, Trans temp, fuel pressure gauges, full Billet Goerend 48rE, FASS 150/150, CFM+, Smarty, MP-8, Floor-It stage 3 CP3, F1 Flux 4 200+HP injectors, Garret GT4094R, Head studs, Intake, Exhaust

10-08-2008, 04:54 PM	#12 (permalink)
*Hot Stuff* Smokin' Join Date: Dec 2007 Location: Republic, Ohio Posts: 2,544 Hot Stuff's Truck Pics	Hell, my truck without me in it, full of fuel, is like 7700#. __________________ '03 Black 2500 QC/LB 4x4, 6 speed, BHAF, black H2's, 35" BFG MT's, B&W turnover, Juice w/ Attitude, 5" str8 pipe, BD lift pump, spin on filters, traction bars Adam---Proud member of the OHIO COAL ROLLERS