6" single stack?

dsl kicks gas · 09-14-2008, 09:55 PM

im thinking about doing a 6" singe stack. the only think keeping me from it right now is not having the 90's to do it with i have the stack and the flex pipe, will it be to loud in the cab and does it look ok?

__________________
98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

dsl kicks gas · 09-14-2008, 09:57 PM

i want it ofset to the side right where it is in the picture, i thought about making a steel box and saving 2 elbows. what do yall think?

__________________
98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

dsl kicks gas · 09-14-2008, 09:59 PM

or does it look better with a tail pipe?

__________________
98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

**bkjeffrey** · 09-14-2008, 10:03 PM

If it were me I would make the box and save the 90s. The box would flow and sound better. I did it with 90s And I believe it creates a bit of restriction plus it has a really wierd drone.

I think it would look good on your truck, especially if you off set it into the corner of the bed.

Heres how I off set mine. I used an old exhaust pipe from a buddies truck to hack up and make my bends.
My New big single pics.

__________________
04 QC/LWB 48RE 4x4: EJA, Arson CP3, BHAF, 4" TB stainless steel exhaust, 7" stack, Propane injection, Swanker intake manifold, GDP heater grid delete, BD 100 gal/hr pump, Big line kit, spin on fuel filter, Racor seperator, FS2500, mystery switch, 5 gallon on-board air system, Viair comp, Optima blue tops, 1875 Watt dvd stereo system, train horns. 6" lift w/35x12.50/20's

jlibert · 09-14-2008, 10:50 PM

stack all the way. A 6" will sound good. I'd put it just a bit higher than you have in the pic. Otherwise it'll soot your bed all the time.

__________________
Thanks to Marco, Bob, and Brown's Diesel
659 hp

dsl kicks gas · 09-14-2008, 11:09 PM

thats as high as it can go lol its a 24" magniflow tip, and i can get it a inch higher befor the you can see where it goes down to 4"

__________________
98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

09-14-2008, 09:55 PM	#1 (permalink)
dsl kicks gas Diesel Freak Join Date: Mar 2008 Location: Scottsburg In Posts: 743 dsl kicks gas's Truck Pics	6" single stack? im thinking about doing a 6" singe stack. the only think keeping me from it right now is not having the 90's to do it with i have the stack and the flex pipe, will it be to loud in the cab and does it look ok? __________________ 98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-14-2008, 09:57 PM	#2 (permalink)
dsl kicks gas Diesel Freak Join Date: Mar 2008 Location: Scottsburg In Posts: 743 dsl kicks gas's Truck Pics	i want it ofset to the side right where it is in the picture, i thought about making a steel box and saving 2 elbows. what do yall think? __________________ 98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

09-14-2008, 09:59 PM	#3 (permalink)
dsl kicks gas Diesel Freak Join Date: Mar 2008 Location: Scottsburg In Posts: 743 dsl kicks gas's Truck Pics	or does it look better with a tail pipe? __________________ 98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things

09-14-2008, 10:03 PM	#4 (permalink)
bkjeffrey MS Chapter VP Join Date: Mar 2008 Location: Mississippi Gulf Coast Posts: 426 bkjeffrey's Truck Pics	If it were me I would make the box and save the 90s. The box would flow and sound better. I did it with 90s And I believe it creates a bit of restriction plus it has a really wierd drone. I think it would look good on your truck, especially if you off set it into the corner of the bed. Heres how I off set mine. I used an old exhaust pipe from a buddies truck to hack up and make my bends. My New big single pics. __________________ 04 QC/LWB 48RE 4x4: EJA, Arson CP3, BHAF, 4" TB stainless steel exhaust, 7" stack, Propane injection, Swanker intake manifold, GDP heater grid delete, BD 100 gal/hr pump, Big line kit, spin on fuel filter, Racor seperator, FS2500, mystery switch, 5 gallon on-board air system, Viair comp, Optima blue tops, 1875 Watt dvd stereo system, train horns. 6" lift w/35x12.50/20's

09-14-2008, 10:50 PM	#5 (permalink)
jlibert Cummins Fan Join Date: Jun 2007 Posts: 78 jlibert's Truck Pics	stack all the way. A 6" will sound good. I'd put it just a bit higher than you have in the pic. Otherwise it'll soot your bed all the time. __________________ Thanks to Marco, Bob, and Brown's Diesel 659 hp

09-14-2008, 11:09 PM	#6 (permalink)
dsl kicks gas Diesel Freak Join Date: Mar 2008 Location: Scottsburg In Posts: 743 dsl kicks gas's Truck Pics	thats as high as it can go lol its a 24" magniflow tip, and i can get it a inch higher befor the you can see where it goes down to 4" __________________ 98.5 qc/lb 2500 valair 3800# single, holset35/40, Smarty, Drag Comp, DDP 110's, 75 hp cummins tune, 4" tb, to 6" single stack, isspro gauges 1/2 lines to the vp, holey blue, home made laddar bars. future mods: air dog, charger, and a few other things