Cummins Diesel Forum banner

drive shaft ......................

742 views 6 replies 3 participants last post by  jd_2001 
#1 ·
i am trying to find out the easiest way to get my rear drive shaft out. i can unbolt the whole carrier from the truck or i can unbolt the shaft from the carrier. which is the easiest way to do this.
 
#3 ·
take the whole thing down. 4 bolts on the rearend and then I think there is 2 to drop it.
 
#4 ·
I just reread your post and am a bit confused. You undo the bolts that hold it the rearend. if no steady bearing then just pull it out of the tranny. There will be a small amount of oil that will come out of tranny, more if your pointed uphill.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top