New hair dryer and manifold

BigB82789 · 06-02-2008, 04:56 PM

Picked 'em up today. Thanks Wally. I thought I'd post some pics of the port job I did on the 3 piece manifold. Sorry for the quality, I only had the phone..I'll find the good camera someday..

Before:

After:

Port Matched to the gasket..

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE

RDP Diesel, FTEDiesel

BigB82789 · 06-02-2008, 04:57 PM

And smooth as glass...Maybe an extra 100hp??

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE

RDP Diesel, FTEDiesel

BigB82789 · 06-08-2008, 11:14 AM

Got her on this weekend. Heres some pics.
The old HY and manifold

Blown Seal:

Thanks you Northeast Ohio winters!

HY Left, HTT right:

The 3 piece HTT

This thing takes a lot longer to spool, but when it does..look out. Once it hits 15psi it shoots over to 45 or so and then the wastegate backs it off to 42. Now I gotta get to the track...

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE

RDP Diesel, FTEDiesel

dieselguy147 · 06-08-2008, 11:36 AM

looks awesome. how much you pay for the setup?

__________________

2004 2500 cummins 6 spd. quad cab. triple piller gauges, rest stock

**JacktheBear3** · 06-11-2008, 09:56 AM

Looks Great Brian..... Been so busy I did not see this post until today. That tight converter is the spool, but I bet you see equal or greater mileage with that Turbo.

I have a Head I need ported, how Much?

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

***awenthol*** · 06-11-2008, 10:20 AM

...BD manifold?

__________________

2006 Laramie QC, SB, 4x4, 48RE 2 3
06/21/2008 - 478hp - 923 lb-ft

**JacktheBear3** · 06-11-2008, 10:39 AM

High Tech.....

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

BigB82789 · 06-11-2008, 02:42 PM

I'd be nervous on a head..I'll port some manifolds for parts though..

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE

RDP Diesel, FTEDiesel

**JacktheBear3** · 06-13-2008, 07:43 AM

Quote:

Originally Posted by BigB82789

I'd be nervous on a head..I'll port some manifolds for parts though..

You been to the track this week ?

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

kaw19razor · 06-13-2008, 08:14 AM

Very Nice!.... Keep us updated once you make it to the track!

BigB82789 · 06-13-2008, 02:35 PM

Quote:

You been to the track this week ?

No. If I feel froggy tonight Josh said he'd let me borrow a hitch at the pulls. Next weekend is the Steel Valley Super Nats. so i'll try to lay down some times then. 14.5@89 stock turbo and injectors. Think theres any hope of a 13.99999999 with the new turbo and a light truck?

__________________

'01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE

RDP Diesel, FTEDiesel

**JacktheBear3** · 06-13-2008, 09:10 PM

Quote:

Originally Posted by BigB82789

No. If I feel froggy tonight Josh said he'd let me borrow a hitch at the pulls. Next weekend is the Steel Valley Super Nats. so i'll try to lay down some times then. 14.5@89 stock turbo and injectors. Think theres any hope of a 13.99999999 with the new turbo and a light truck?

Did you get rained out in Goshen?

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

06-02-2008, 04:56 PM	#1 (permalink)
BigB82789 Diesel Head Join Date: Mar 2007 Location: ohio Posts: 1,636 BigB82789's Truck Pics	New hair dryer and manifold Picked 'em up today. Thanks Wally. I thought I'd post some pics of the port job I did on the 3 piece manifold. Sorry for the quality, I only had the phone..I'll find the good camera someday.. Before: After: Port Matched to the gasket.. __________________ '01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE RDP Diesel, FTEDiesel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

06-02-2008, 04:57 PM	#2 (permalink)
BigB82789 Diesel Head Join Date: Mar 2007 Location: ohio Posts: 1,636 BigB82789's Truck Pics	And smooth as glass...Maybe an extra 100hp?? __________________ '01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE RDP Diesel, FTEDiesel

06-08-2008, 11:14 AM	#3 (permalink)
BigB82789 Diesel Head Join Date: Mar 2007 Location: ohio Posts: 1,636 BigB82789's Truck Pics	Got her on this weekend. Heres some pics. The old HY and manifold Blown Seal: Thanks you Northeast Ohio winters! HY Left, HTT right: The 3 piece HTT This thing takes a lot longer to spool, but when it does..look out. Once it hits 15psi it shoots over to 45 or so and then the wastegate backs it off to 42. Now I gotta get to the track... __________________ '01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE RDP Diesel, FTEDiesel

06-08-2008, 11:36 AM	#4 (permalink)
dieselguy147 Cummins Fan Join Date: Mar 2008 Posts: 54 dieselguy147's Truck Pics	looks awesome. how much you pay for the setup? __________________ 2004 2500 cummins 6 spd. quad cab. triple piller gauges, rest stock

06-11-2008, 09:56 AM	#5 (permalink)
JacktheBear3 FTE Diesel Join Date: Mar 2007 Location: Northeast, Ohio Posts: 1,314 JacktheBear3's Truck Pics	Looks Great Brian..... Been so busy I did not see this post until today. That tight converter is the spool, but I bet you see equal or greater mileage with that Turbo. I have a Head I need ported, how Much? __________________ 2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

06-11-2008, 10:20 AM	#6 (permalink)
*awenthol* Pretending to be a poser Join Date: Jan 2007 Location: Central Iowa Posts: 3,741 awenthol's Truck Pics	...BD manifold? __________________ 2006 Laramie QC, SB, 4x4, 48RE 2 3 06/21/2008 - 478hp - 923 lb-ft

06-11-2008, 10:39 AM	#7 (permalink)
JacktheBear3 FTE Diesel Join Date: Mar 2007 Location: Northeast, Ohio Posts: 1,314 JacktheBear3's Truck Pics	High Tech..... __________________ 2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

06-11-2008, 02:42 PM	#8 (permalink)
BigB82789 Diesel Head Join Date: Mar 2007 Location: ohio Posts: 1,636 BigB82789's Truck Pics	I'd be nervous on a head..I'll port some manifolds for parts though.. __________________ '01 24V Fuel By F1 Diesel,Quadzilla, & Smarty, Air by HTT, Tranny by RDP/FTE RDP Diesel, FTEDiesel

06-13-2008, 08:14 AM	#10 (permalink)
kaw19razor Cummins Fanatic Join Date: Jan 2008 Location: Renton, WA Posts: 160 kaw19razor's Truck Pics	Very Nice!.... Keep us updated once you make it to the track!