8" Miters installed on a 3rd Gen.... - Page 4

cbrahs · 05-27-2008, 10:16 PM

Well I have not been on here in a while and wanted to give a bit of an update. The blotches are just as Wally stated, I took the pics not 15 minutes after installing them and the bed kit was a b*#($#(#(&$ to get worked out. I am working on getting them Ceramic coated. The bed kit and the stacks are getting a gloss black ceramic treatment. There is a coater here in town and will be posting pics as soon as they are done. Then the bed is getting Line-X'd with over the rail. The clamps, i know people are saying they are too expensive but like Wally stated, it is hard to sell the best for less. I know the machinist personally and was there for most of the process and there is a TON of time in the programming and the machining. Granted the majority of the process is done by a CNC machine but there is a bunch of hand work in the deal.

THANKS WALLY AN D FTE DIESEL FOR AWESOME WORK AND KILLER CUSTOMER SERVICE!!!

__________________
07 5.9 Mega,48RE,Ravelco,6"superlift,3"bodylift,39.5 IROK's,train horns,Smarty,Autometers,Lazarsmith gauge plate, Recons,8" stacks with billet clamps,airdog,superlift dual steering stabilizer, Ravelco, many more to come.

**Austin The DieselTech** · 05-27-2008, 11:50 PM

Quote:

Originally Posted by cbrahs

Well I have not been on here in a while and wanted to give a bit of an update. The blotches are just as Wally stated, I took the pics not 15 minutes after installing them and the bed kit was a b*#($#(#(&$ to get worked out. I am working on getting them Ceramic coated. The bed kit and the stacks are getting a gloss black ceramic treatment. There is a coater here in town and will be posting pics as soon as they are done. Then the bed is getting Line-X'd with over the rail. The clamps, i know people are saying they are too expensive but like Wally stated, it is hard to sell the best for less. I know the machinist personally and was there for most of the process and there is a TON of time in the programming and the machining. Granted the majority of the process is done by a CNC machine but there is a bunch of hand work in the deal.

THANKS WALLY AN D FTE DIESEL FOR AWESOME WORK AND KILLER CUSTOMER SERVICE!!!

__________________
Austin Jenson - Napavine, Wa
477HP/862TQ - 2003 2500 6Spd QCLB 4X4 K&N, Gauges, SBC 3600 DD, Studs, HTT62/71/13SS, Flux 2's, Smarty, TST, AirDog 150, 6" Miters, Hushpower, rail capped

I-6DZL · 05-28-2008, 03:15 AM

Quote:

Originally Posted by cbrahs

Well I have not been on here in a while and wanted to give a bit of an update. The blotches are just as Wally stated, I took the pics not 15 minutes after installing them and the bed kit was a b*#($#(#(&$ to get worked out. I am working on getting them Ceramic coated. The bed kit and the stacks are getting a gloss black ceramic treatment. There is a coater here in town and will be posting pics as soon as they are done. Then the bed is getting Line-X'd with over the rail. The clamps, i know people are saying they are too expensive but like Wally stated, it is hard to sell the best for less. I know the machinist personally and was there for most of the process and there is a TON of time in the programming and the machining. Granted the majority of the process is done by a CNC machine but there is a bunch of hand work in the deal.

THANKS WALLY AN D FTE DIESEL FOR AWESOME WORK AND KILLER CUSTOMER SERVICE!!!

Hand work as well as the cost of the CNC equipment ALONE is enough to bury most folks.

Great lookin truck!!

Curtis

__________________
98 QC 4x4 SB 12V, DTT, DDP3's, HX-40,3K-GSK,#4 plate,AFE,Di-Pricol guages,ATS Ex-Manifold,Flex-A-Lite 262,AGR Steering box,RS5000's Even oldfart had dodge envy for a second... LOL

**JacktheBear3** · 09-09-2008, 07:55 PM

I think I sniff a stack sale coming real soon.... any one interested give us a PM

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock

**Diesel_Nuts** · 10-20-2008, 01:12 AM

Im interested in a single 8" Black Miter Wally, and will be calling you later this morning, so that we can talk about it!!

__________________
07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come....

DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

***stinnett25*** · 10-20-2008, 01:51 AM

Im getting an 02 and guess what, like i said in another thread, the beds getting cut in this one!

__________________
06 BIG HORN 4x4 Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's
02 QC LB LARIME 47RE 4x4 FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.

**Diesel_Nuts** · 10-20-2008, 01:54 AM

Do it to both trucks Telly!! I have been wanting to do this for a while, and am finally gonna go for it.

__________________
07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come....

DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

***stinnett25*** · 10-20-2008, 01:56 AM

Hopin to get rid of my 06.

__________________
06 BIG HORN 4x4 Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's
02 QC LB LARIME 47RE 4x4 FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.

**Diesel_Nuts** · 10-20-2008, 02:05 AM

Yeah, I know you have been kicking around that idea for a while!! Good luck with everything.

__________________
07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come....

DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

***stinnett25*** · 10-20-2008, 02:10 AM

Thanks bud. Think im going to have to take a bit of a beating on it but hey, who doesnt.

__________________
06 BIG HORN 4x4 Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's
02 QC LB LARIME 47RE 4x4 FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.

**Diesel_Nuts** · 10-20-2008, 02:12 AM

Yeah, and sorry to hear that!! Maybe you should keep both, and just move down here, and get you an offshore job.

__________________
07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come....

DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

***stinnett25*** · 10-20-2008, 02:19 AM

You know im down for that. Ready to come back down to Texas!

__________________
06 BIG HORN 4x4 Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's
02 QC LB LARIME 47RE 4x4 FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-27-2008, 10:16 PM	#37 (permalink)
cbrahs Newbie Join Date: Feb 2008 Location: Albuquerque New Mexico Posts: 24 cbrahs's Truck Pics	Well I have not been on here in a while and wanted to give a bit of an update. The blotches are just as Wally stated, I took the pics not 15 minutes after installing them and the bed kit was a b*#($#(#(&$ to get worked out. I am working on getting them Ceramic coated. The bed kit and the stacks are getting a gloss black ceramic treatment. There is a coater here in town and will be posting pics as soon as they are done. Then the bed is getting Line-X'd with over the rail. The clamps, i know people are saying they are too expensive but like Wally stated, it is hard to sell the best for less. I know the machinist personally and was there for most of the process and there is a TON of time in the programming and the machining. Granted the majority of the process is done by a CNC machine but there is a bunch of hand work in the deal. THANKS WALLY AN D FTE DIESEL FOR AWESOME WORK AND KILLER CUSTOMER SERVICE!!! __________________ 07 5.9 Mega,48RE,Ravelco,6"superlift,3"bodylift,39.5 IROK's,train horns,Smarty,Autometers,Lazarsmith gauge plate, Recons,8" stacks with billet clamps,airdog,superlift dual steering stabilizer, Ravelco, many more to come.

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

09-09-2008, 07:55 PM	#40 (permalink)
JacktheBear3 FTE Diesel Join Date: Mar 2007 Location: Northeast, Ohio Posts: 2,158 JacktheBear3's Truck Pics	I think I sniff a stack sale coming real soon.... any one interested give us a PM __________________ 2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk... Floor It CP3 MOD's & PPE Dual Fueler Kits 6.7 Race / Delete Pipes and Sims in stock

10-20-2008, 01:12 AM	#41 (permalink)
Diesel_Nuts TEXAS EAST VP Join Date: Oct 2007 Location: Spring Tx. Posts: 1,739 Diesel_Nuts's Truck Pics	Im interested in a single 8" Black Miter Wally, and will be calling you later this morning, so that we can talk about it!! __________________ 07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come.... DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

10-20-2008, 01:51 AM	#42 (permalink)
*stinnett25* Mullet Photogragher Join Date: Sep 2006 Location: Farmersburg Indiana Posts: 3,116 stinnett25's Truck Pics	Im getting an 02 and guess what, like i said in another thread, the beds getting cut in this one! __________________ 06 BIG HORN 4x4 *Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's* 02 QC LB LARIME 47RE 4x4 *FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.*

10-20-2008, 01:54 AM	#43 (permalink)
Diesel_Nuts TEXAS EAST VP Join Date: Oct 2007 Location: Spring Tx. Posts: 1,739 Diesel_Nuts's Truck Pics	Do it to both trucks Telly!! I have been wanting to do this for a while, and am finally gonna go for it. __________________ 07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come.... DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

10-20-2008, 01:56 AM	#44 (permalink)
*stinnett25* Mullet Photogragher Join Date: Sep 2006 Location: Farmersburg Indiana Posts: 3,116 stinnett25's Truck Pics	Hopin to get rid of my 06. __________________ 06 BIG HORN 4x4 *Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's* 02 QC LB LARIME 47RE 4x4 *FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.*

10-20-2008, 02:05 AM	#45 (permalink)
Diesel_Nuts TEXAS EAST VP Join Date: Oct 2007 Location: Spring Tx. Posts: 1,739 Diesel_Nuts's Truck Pics	Yeah, I know you have been kicking around that idea for a while!! Good luck with everything. __________________ 07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come.... DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

10-20-2008, 02:10 AM	#46 (permalink)
*stinnett25* Mullet Photogragher Join Date: Sep 2006 Location: Farmersburg Indiana Posts: 3,116 stinnett25's Truck Pics	Thanks bud. Think im going to have to take a bit of a beating on it but hey, who doesnt. __________________ 06 BIG HORN 4x4 *Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's* 02 QC LB LARIME 47RE 4x4 *FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.*

10-20-2008, 02:12 AM	#47 (permalink)
Diesel_Nuts TEXAS EAST VP Join Date: Oct 2007 Location: Spring Tx. Posts: 1,739 Diesel_Nuts's Truck Pics	Yeah, and sorry to hear that!! Maybe you should keep both, and just move down here, and get you an offshore job. __________________ 07 2500 QC (Electric Blue Pearl) 4x4, 5.9L, HTS Trans, Ostrich Seats, 8" Rize Lift, 20's on 37's, Amsoil w/ BMK-11, SMARTY, 5" MBRP, CFM+, AFE Stage 2/Nano Filter, BD Manifold, Quad Commander & Boost Fooler, FTE Rail Cap, Wicked CP3, Airdog 150, Mag Hytec Diff Covers. More to come.... DiPricol FP & RP, Thanks to John @ Holland Court....8" Mitre coming soon, Thanks to Wally @ FTE!!

10-20-2008, 02:19 AM	#48 (permalink)
*stinnett25* Mullet Photogragher Join Date: Sep 2006 Location: Farmersburg Indiana Posts: 3,116 stinnett25's Truck Pics	You know im down for that. Ready to come back down to Texas! __________________ 06 BIG HORN 4x4 *Billet FTE single disk converter and valve body, 5"TBE, S&B Stage II, aFe Blade Runner, II Stage 1, Eliminator, Smarty, Dipricol's* 02 QC LB LARIME 47RE 4x4 *FASS 150, 150hp stix, Dipricols, Edge Comp, Smarty, and single 7" black powdercoated Miter, coming AEM and some Trans work.*