8" Miters installed on a 3rd Gen....

[fordkiller43]

They look good but the flat black doesnt look the best with all the blotches and discolored spots.

__________________
'02 2500 4X4 auto; SC VB, Drag Comp, FBD 100's sticks, AFE stg II, Silencer ring MIA, J hook, Banks High Ram, Carter pusher, Triple Pillar w/ Boost, Pyro, and FP gauges, MBRP 5" str8 pipe, 4.5" skyjacker, DSS bar, 35" Bighorns, Frontier bumper... s300 66/14 on its way! Coaltrain trans in the making

[JacktheBear3]

Originally Posted by farmboysdiesel

The guy who does my coating can put some bling on them and they hold fine. The oldest set of coated blacks I have out is around 2 years old and they look fine. Good looking stacks Wally.

Last set I saw (i think they were lee's) had that textured look to them.... is this what your talking about?

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock

[JacktheBear3]

Originally Posted by fordkiller43

They look good but the flat black doesnt look the best with all the blotches and discolored spots.

Those spots were installation wounds I believe. Those pictures were taken minutes after initial install. The bedkit was existing and had been welded together unlike most Grand Rock Kits, so there was alot of wrestling going on in the bed of that truck.

For the situation, they look good and will get cleaned up I am sure.

I know Chris is 110% satisfied right now.

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock

[HoofPower]

Hey FTE...the guy doesnt have a web site yet. He started doing this stuff about a year a half ago because he builds custom harley's. I know him through my future father-in-law, and i can see what i can drum up for you if you would like.

[getblown5.9]

are your clamps $250 a piece and come with a bottle of KY?

just curious if you are making a small fortune off them like the other guy.

__________________
2002 Dodge Ram 2500
QCLB, 4x4, 3.54LS, 6spd HO CTD
Mostly stock with a couple things like stacks, 33's, and a big black bumper!

[blowinsmoke99]

I'd say there worth it. The price of being cool ain't cheap. NICE SET UP guys

__________________
2001 Dodge CTD 2500 4x4. 6in. straight pipe edge juice with attitude towing mirrors and a Green CAI for sale $12,000

[SmokinDiesel]

Too big for my taste ... But nice job none the less

__________________
Mike Charlton - Keystone Diesel
1996 Dodge Cummins 12 Valve
580hp - 1178 ft lbs
Still Shooting for 600+ ....

[TexasHemi]

Looks great!

__________________
What I want:
2000-2002 Ram 2500 - 4x4, FASS, 4" TBE, Smarty, stacks, and other extras (need )

Bear Creek Car Repair

[JacktheBear3]

Originally Posted by getblown5.9

are your clamps $250 a piece and come with a bottle of KY?

just curious if you are making a small fortune off them like the other guy.

Nice to have your comments.....

I will let you know what we want when we get our costing structure figured out. As you know, the bling is not for everyone, and you just might need some lube to buy them.

I am hoping to be a bit more friendly on the price, but it's hard to sell the best for less.

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock

[JacktheBear3]

Thanks guys for the good comments.... the beauty of our world is different strokes for different folks.

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock

[Tuffguy707]

after seeing those now maybe i want 8" bullhaulers. damn it quit showing all these awsome stacks. i want them sooooooooooo bad but like i said before im a little short on

quit teasing me

__________________
mine 2007 laramie 4x4 black with 5.9 and strait 6 inch exhaust by bullydog. quad cab 8' bed 3500 srw, nav, sunroof and bucket seats, bullydog rfi ,silencer ring MIA, bullydog pmt ,hornblaster train horns
my work trucks:
GONE BUT NOT FORGOTTEN 98 24V C&C...01 C&C....07 6.7 C&C

[JacktheBear3]

Originally Posted by tuffguy707

after seeing those now maybe i want 8" bullhaulers. damn it quit showing all these awsome stacks. i want them sooooooooooo bad but like i said before im a little short on

quit teasing me

Tuff Guy, drive up 77 and get you some of the good stuff....

We are less than an hour away.

Rock On

__________________

2002 24V, 2500 Quad Cab, Dark Silver, We Bit O Lift, Plain Jane, Comp (drag), BDRAD, Smarty Stack, 027 SO VP, FASS 150/150 w/BigStraw, F1 Mach 7.?, The Girlz are T61 & S400, PDR Stg III Head w/Rings top & bottom, HTS/FTE FULL billet Auto, SS Single Converter, Optix Gauges ( all high #'s), Detroit Locker, Custom 6" Miters, and plenty O junk in the Trunk...

Floor It CP3 MOD's & PPE Dual Fueler Kits
6.7 Race / Delete Pipes and Sims in stock