Suncoast Dyno Day Jan 27th

[got...DIESEL?]

Who's goin? I know Me and Scrappy are planning a little convoy out of Panama City along with a few prospective bombers from the area. Any of you panhandleboys wanna meet up and head out? Can't beat the coast drive into Ft. Walton. So let's get Florida on the Dodge map and get organized shall we?

As for the rest of the Southeast/midwest....how about a rondezvous somewhere?

Chris

__________________

In NW Florida? Get a hold of me...it's time Dodge makes it statement in these parts!!

'95 2500 Std Cab 4X4... DTT billet trans and billet triple disc, billet flexplate, compound turbos, AEM Dryflow, 160 pump, custom plate, 191's, EDM370's, peaked and tweaked AFC, rack control plug, 20*, 3K, head studs, marine +.020 HG, Water/meth

[TOMTOM]

I'am In. Been Ready For A Road Trip.
Tomtom

__________________
93 SRW D2500 X-CAB SHORT BED LE CTD AUTO BHAF P7100 PUMP PUMP MODS 4000 GSK 60# SPRINGS A1 STUDS FULL MANUAL 47RE BILLET INPUT SHAFT SUNCOAST TRIPLE DISC 440/967 13.31@101mph 0N #2

[scrappy]

Originally Posted by got...DIESEL?

Who's goin? I know Me and Scrappy are planning a little convoy out of Panama City along with a few prospective bombers from the area. Any of you panhandleboys wanna meet up and head out? Can't beat the coast drive into Ft. Walton. So let's get Florida on the Dodge map and get organized shall we?

As for the rest of the Southeast/midwest....how about a rondezvous somewhere?

Chris

Here is the link to the Suncoast site:


http://www.suncoastconverters.com/ne...ewsevents.html

I don't know yet if it is going to cost anything to dyno, my first year was free but last year was $60 for 3 runs. It is a good time even if you don't get on the dyno, there will be a free lunch/ drinks there and it is a good opportunity to meet some fellow dieselheads! (and see some STRONG trucks)
there is also a link on their page to the dyno results from last year:

http://www.suncoastconverters.com/ne...ewsevents.html

__________________
457hp/1002tq.on lvl5/VA 100% 2003.5, 3500SRW, qc/lb, ETH/DEE,flame red , SLT Laramie, 4.10's, 35/12.5R17 Toyo Open Country MT's, KORE Chase, Smarty Revo, FLUX 2.5's, self modded CP3, B1-04, GDP 392 comp. pump@ 37 psi., Amsoil 4510 EA filter, MIA crosshairs, SBC Con FE, ISSPRO TTM, DiPricol boost EGT & fuel gauges, custom dual 5" chrome turnout stacks with Aeroturbine 5050XL.

[Splash]

Man, I gotta see if I can get the day off so I can go. If I can that would be the first time I have gone to any kinda of vehicle event. BTW got...DIESEL?, what's your truck look like, when I get my camera back I will have to post up pic of my plain ole truck.

__________________
Green 2wd 1996 Dodge Ram 3500 Ex-Cab LongBed Dually SLT Lariame Dana 80 with 3.55 gears
Bone stock for now
Bought 6-22-06 with 53000 miles Dyno'd HP 166.8 and TORQUE 370.6 1-27-07

[got...DIESEL?]

It's green with a silver canopy currently. License plate Alaska still, and says "UVLOST". Taking the canopy off this weekend though. Rolling on alloys and 33's. Wife's is an 01 QC dually 4X4...and it has a "NOT HIS" sticker on the gate to replace the factory badging. Something about everyone thinking she must be driving the hubby's truck I guess, so the sticker takes that variable away!! I just moved to a place in Lynn haven a few days ago...on E.14th.

try and get the time off...should be a blast!!

Scrappy, sry not to get a hold of you this weekend, we drove up to Illinois and back on Saturday/Sunday to fetch the rest of our houshold stuff we left there when we came down here to check it out. Wow 1500 miles in 48hrs with a packing/unpacking production on both ends sure takes the snot outa ya in a hurry. Glad it's done now though!! Hows them other CF recruits lookin?

Chris

__________________

In NW Florida? Get a hold of me...it's time Dodge makes it statement in these parts!!

'95 2500 Std Cab 4X4... DTT billet trans and billet triple disc, billet flexplate, compound turbos, AEM Dryflow, 160 pump, custom plate, 191's, EDM370's, peaked and tweaked AFC, rack control plug, 20*, 3K, head studs, marine +.020 HG, Water/meth

[scrappy]

Originally Posted by got...DIESEL?

Scrappy, sry not to get a hold of you this weekend, we drove up to Illinois and back on Saturday/Sunday to fetch the rest of our houshold stuff we left there when we came down here to check it out. Wow 1500 miles in 48hrs with a packing/unpacking production on both ends sure takes the snot outa ya in a hurry. Glad it's done now though!! Hows them other CF recruits lookin?

Chris

I didn't expect to hear from you, I knew you were doing the road trip back to Il. this weekend. So far I have 2 possible and a third I am trying to get ahold of.

__________________
457hp/1002tq.on lvl5/VA 100% 2003.5, 3500SRW, qc/lb, ETH/DEE,flame red , SLT Laramie, 4.10's, 35/12.5R17 Toyo Open Country MT's, KORE Chase, Smarty Revo, FLUX 2.5's, self modded CP3, B1-04, GDP 392 comp. pump@ 37 psi., Amsoil 4510 EA filter, MIA crosshairs, SBC Con FE, ISSPRO TTM, DiPricol boost EGT & fuel gauges, custom dual 5" chrome turnout stacks with Aeroturbine 5050XL.

[Splash]

Hey got...DIESEL, I am definitely going to try to get off that day, I would have to get off from both my jobs. I live right off of Northshore, you wouldn't be able to miss it, sometimes I thinks it looks like a car lot. But that is because of all the vehicles everyone in the house owns. My problem is that mostly all I see down my street are SuperDookies. Mine now has the plastic pieced off of the front bumper, having to replace them from a minor fender bender, and extendable towing mirrors with chrome covers and turn signals(wife liked them, I liked them, and she bought them as a x-mas gift).

__________________
Green 2wd 1996 Dodge Ram 3500 Ex-Cab LongBed Dually SLT Lariame Dana 80 with 3.55 gears
Bone stock for now
Bought 6-22-06 with 53000 miles Dyno'd HP 166.8 and TORQUE 370.6 1-27-07

[got...DIESEL?]

Originally Posted by scrappy

I didn't expect to hear from you, I knew you were doing the road trip back to Il. this weekend. So far I have 2 possible and a third I am trying to get ahold of.

Sounds good. I think we have the makings and enough guys to have an official chapter!! Well, that's still in the works, but we should have an official CRF meet anyways.....how's this weekend sound? we can iron out the Suncoast details too.

Chris

__________________

In NW Florida? Get a hold of me...it's time Dodge makes it statement in these parts!!

'95 2500 Std Cab 4X4... DTT billet trans and billet triple disc, billet flexplate, compound turbos, AEM Dryflow, 160 pump, custom plate, 191's, EDM370's, peaked and tweaked AFC, rack control plug, 20*, 3K, head studs, marine +.020 HG, Water/meth

[mrwaters]

I will be there. I am also up for a local chapter.
Mike

__________________
98 12V QC SB 4X4 auto, 203K, original trans, timed to 16.5, KDP killed, #12 plate, AFC soft spring- forward, DSS, Thurenfab track bar, GMC 1 Ton rear break cylinder. Red Tops, No Cat.

[scrappy]

I'm up for a GTG this weekend, but I will have my kids with me. When and where do you want to meet?

__________________
457hp/1002tq.on lvl5/VA 100% 2003.5, 3500SRW, qc/lb, ETH/DEE,flame red , SLT Laramie, 4.10's, 35/12.5R17 Toyo Open Country MT's, KORE Chase, Smarty Revo, FLUX 2.5's, self modded CP3, B1-04, GDP 392 comp. pump@ 37 psi., Amsoil 4510 EA filter, MIA crosshairs, SBC Con FE, ISSPRO TTM, DiPricol boost EGT & fuel gauges, custom dual 5" chrome turnout stacks with Aeroturbine 5050XL.

[kalkhokm]

i would love to get my truck dynoed. i will probably make the drive from ocala

__________________
99' 2500 4x4, 6" Stack, AFE, 7x.012 EDM's, .093 tubes, Redline, Prostreet 66/71/14, studs/orings, Hamilton diesel 110 lb springs, BD exhaust manifold, Fass 150/150, guages, Goerend triple disk, billet input shaft/flexplate, suncoast vb

[got...DIESEL?]

Sounds good guys...so we're getting a few trucks together.

I guess for the meet this weekend, we should pick someone kinda central to everyone....I know Scrappy and a few of his guys are over by Tyndall, and there's a few of us on the North side in Lynn haven. So what do ya think?

And as far as the rondezvous for Suncoast, I guess somewhere down in Panama City Beach eh?

Chris

__________________

In NW Florida? Get a hold of me...it's time Dodge makes it statement in these parts!!

'95 2500 Std Cab 4X4... DTT billet trans and billet triple disc, billet flexplate, compound turbos, AEM Dryflow, 160 pump, custom plate, 191's, EDM370's, peaked and tweaked AFC, rack control plug, 20*, 3K, head studs, marine +.020 HG, Water/meth