http://www.cumminsforum.com/forum en Sun, 22 Nov 2009 01:02:52 GMT vBulletin 60 http://image.autoforums.com/cumminsforum/misc/rss.jpg http://www.cumminsforum.com/forum http://www.cumminsforum.com/forum/general-sale-section/212898-cab-light-template.html Sun, 22 Nov 2009 00:11:16 GMT I have my cab light template that was a copy of the original that came from the dodge oem cab light kit. It was originally for the 2nd gen lights, but I modified it to get the proper spacing for my 3rd gen recon lights. No charge to anyone that needs it...... I have my cab light template that was a copy of the original that came from the dodge oem cab light kit. It was originally for the 2nd gen lights, but I modified it to get the proper spacing for my 3rd gen recon lights.

No charge to anyone that needs it...... ]]> General For Sale Section btolenti http://www.cumminsforum.com/forum/general-sale-section/212898-cab-light-template.html http://www.cumminsforum.com/forum/general-sale-section/212874-aluminum-valve-cover.html Sat, 21 Nov 2009 22:55:08 GMT This is a Billet aluminum 2 piece valve cover that sells for 375 new @ Genos. Will take 250.00 shipped in lower 48. Will ship USPS. This is a Billet aluminum 2 piece valve cover that sells for 375 new @ Genos. Will take 250.00 shipped in lower 48. Will ship USPS. ]]> General For Sale Section SilverBullet83 http://www.cumminsforum.com/forum/general-sale-section/212874-aluminum-valve-cover.html http://www.cumminsforum.com/forum/general-sale-section/212772-cat-turbo.html Sat, 21 Nov 2009 16:17:53 GMT Large Cat turbo off of a 3406e 14.6 475hp. Looks fairly new, was remaned, very tight. Cat p/n OR-7923, did some research seems to be around an 80mm inducer, like a GT47 garret im pretty sure. Have pics if intersted. $500 obo shipped!! Large Cat turbo off of a 3406e 14.6 475hp. Looks fairly new, was remaned, very tight.

Cat p/n OR-7923, did some research seems to be around an 80mm inducer, like a GT47 garret im pretty sure. Have pics if intersted.

$500 obo shipped!! ]]> General For Sale Section DieselNasty http://www.cumminsforum.com/forum/general-sale-section/212772-cat-turbo.html http://www.cumminsforum.com/forum/general-sale-section/212755-coolingmist-water-injection-stuff.html Sat, 21 Nov 2009 14:47:36 GMT Name - Birt McKendree
Location - Vassar, Michigan
Payment Preference - Paypal

I have a brand new Cooling Mist Vari-Cool 2 controller for sale for $150, and a Vari-Safe controller kit for sale for $250 plus S&H.

I'll sell both of them for $375

The Varisafe kit comes with the software, latest flash version, a 150 PSI pump, status monitor, EGT converter, solenoid, and two nozzles at 6 & 10 GPH capacity plus other assorted components. Please e-mail or PM me for more info or pics.



]]> General For Sale Section boogalou http://www.cumminsforum.com/forum/general-sale-section/212755-coolingmist-water-injection-stuff.html http://www.cumminsforum.com/forum/general-sale-section/212715-aam-11-5-axle-shafts.html Sat, 21 Nov 2009 05:13:26 GMT Hey i got a set of AAM 11.5 Axle shafts, i believe they are new because the paint strip is straight and not twisted like they do when they get used... they are over $200 a piece new, $300 will get ya both! Hey i got a set of AAM 11.5 Axle shafts, i believe they are new because the paint strip is straight and not twisted like they do when they get used... they are over $200 a piece new, $300 will get ya both! ]]> General For Sale Section Andrew Allen http://www.cumminsforum.com/forum/general-sale-section/212715-aam-11-5-axle-shafts.html http://www.cumminsforum.com/forum/general-sale-section/212679-bullseye-turbo.html Sat, 21 Nov 2009 03:16:20 GMT Bullseye 366 turbo it is 4 months old, and like new condition. It has a 66mm compresor wheel, and a 76 turbine wheel with a 91 ar exhaust housing. The turbo is polished to. $900.00 Bullseye 366 turbo it is 4 months old, and like new condition. It has a 66mm compresor wheel, and a 76 turbine wheel with a 91 ar exhaust housing. The turbo is polished to. $900.00 ]]> General For Sale Section 347 mustang http://www.cumminsforum.com/forum/general-sale-section/212679-bullseye-turbo.html http://www.cumminsforum.com/forum/general-sale-section/212611-fs-canon-40d-body-package-deal.html Sat, 21 Nov 2009 00:12:44 GMT Its that time again to upgrade bodies. Selling my minty fresh 40D, comes with original box, cables, discs, neck strap, charger, and all manuals, just as you'd get as if she was a virgin. Body Only No Lenses. Included in the sale is a Canon BG-E2N Battery grip, which comes with orignal box and manuals. 5 batteries are included and will provide enough power to shoot all day and night. Last, but not least, is a Canon CA-PS400 dual desktop battery charger to help charge all the batteries. This is ideal for anyone getting into SLR photographry... all you need is a compact flash card and lens! Camera has approx 7000 pictures taken, its barely broken in. Canon cameras are good for over 150,000 pics! The only issue that I can find is that the vertical shutter release on the battery grip is sometimes slow/delayed when you press the button. I have no idea why it does this. The body performs flawlessly and has never been dropped!

Item is located in Minot ND, buyer pays shipping, paypal ONLY, no refunds, no returns. Item is accurately described to the best of my knowledge.

Asking $1000









]]> General For Sale Section PUREVIL http://www.cumminsforum.com/forum/general-sale-section/212611-fs-canon-40d-body-package-deal.html http://www.cumminsforum.com/forum/general-sale-section/212587-amp-subwoofer.html Fri, 20 Nov 2009 23:02:25 GMT I am selling one Pioneer 10 inch subwoofer in a truck box with a 750 watt amp with the complete wiring kit. It is in perfect working order, just bought a new truck with a sound sytem in it already. I am asking $85 plus shipping. If yall have any questions, just PM me! I am selling one Pioneer 10 inch subwoofer in a truck box with a 750 watt amp with the complete wiring kit. It is in perfect working order, just bought a new truck with a sound sytem in it already. I am asking $85 plus shipping.

If yall have any questions, just PM me! ]]> General For Sale Section gertzrule http://www.cumminsforum.com/forum/general-sale-section/212587-amp-subwoofer.html http://www.cumminsforum.com/forum/general-sale-section/212475-2nd-gen-super-b-special-extras.html Fri, 20 Nov 2009 15:39:06 GMT I had some things come up recently that forced me to sell my 06 Cummins. I had just finished putting these pieces together about 1,000 miles ago, all parts were purchased new. I swapped to the 2nd gen manifold and turbo, so these custom parts would be perfect for someone wanting to swap. The 2nd gen turbo sounded awesome and ran even better.

Super B Special-Always ran with turbo timer, used for less than 1k miles, still set on factory boost setting.
-$1200 plus shipping





4" aluminum IAT sensor tube. Tapped and drilled to allow you to mount the sensor anywhere in a sealed intake.
-$50 plus shipping

ATS 3 piece manifold 94-02
-$380 plus shipping

Custom oil feed line for 2nd gen swap on a third gen
-$50 plus shipping



Custom 321 stainless oil drain for 2nd gen swap. Extends the oil drain location and allows for use of stock drain tube. Includes bracket that mounts to block to insure stiffness.
-$50 plus shipping





Modified HX40 downpipe to better fit a third gen with a 2nd gen manifold. Includes the OEM transmission exhaust hanger.
-$150 plus shipping



I also have a Quadzilla Adrenaline with pulse from my 06. It has about 3k miles on it, works perfect.
$500 plus shipping

ARP head studs #247-4202 Brand new in shrink wrap
$400 plus shipping

Autometer Phantom 60psi boost gauge #5705 Brand new never opened
$40 plus shipping ]]> General For Sale Section Stoichiometric http://www.cumminsforum.com/forum/general-sale-section/212475-2nd-gen-super-b-special-extras.html http://www.cumminsforum.com/forum/general-sale-section/212440-2-5-ton-rockewells-fs.html Fri, 20 Nov 2009 12:07:23 GMT 2.5 ton toplading running gear. shortened. completely rebuilt and upgraded by differential engineering. $3300. located in west palm beach florida. will post pictures later. 2.5 ton toplading running gear. shortened. completely rebuilt and upgraded by differential engineering. $3300. located in west palm beach florida. will post pictures later. ]]> General For Sale Section 1bad12v http://www.cumminsforum.com/forum/general-sale-section/212440-2-5-ton-rockewells-fs.html http://www.cumminsforum.com/forum/general-sale-section/212439-aluminum-flatbed.html Fri, 20 Nov 2009 12:01:52 GMT aluminum flatbed. all LED lights. rear spotlights. deck is rhino lined. located in west palm beach florida. has gooseneck hitch door. 7'10"(W) x 9'2"(L) x 3'9"(H)
78"(W) headache rack. it is in excellent condition. $2800 ]]> General For Sale Section 1bad12v http://www.cumminsforum.com/forum/general-sale-section/212439-aluminum-flatbed.html http://www.cumminsforum.com/forum/general-sale-section/212406-new-5-ss-muffler-delete-pipe.html Fri, 20 Nov 2009 05:45:10 GMT New 5" SS muffler delete pipe. T409. Never used. 30" over all length, 5" ID on both ends like muffler. $50 plus shipping.



]]> General For Sale Section mq105 http://www.cumminsforum.com/forum/general-sale-section/212406-new-5-ss-muffler-delete-pipe.html http://www.cumminsforum.com/forum/general-sale-section/212289-snap-tool-box.html Fri, 20 Nov 2009 01:13:55 GMT Snap-On tool box (http://baltimore.craigslist.org/tls/1473874173.html) I couldnt get my picture to load here so i posted the link to my craigslist ad. Maybe someone needs a big box. I am now out of the repair business so i really have no use for this thing. Snap-On tool box

I couldnt get my picture to load here so i posted the link to my craigslist ad. Maybe someone needs a big box. I am now out of the repair business so i really have no use for this thing. ]]> General For Sale Section toptech72 http://www.cumminsforum.com/forum/general-sale-section/212289-snap-tool-box.html http://www.cumminsforum.com/forum/general-sale-section/212257-lots-dodge-parts-high-perfomance-parts.html Fri, 20 Nov 2009 00:27:09 GMT built 47 re 4wd asking 5500 with converter its coming out of an 03
*Billet one Peice Input Shaft
*Billet Intermediate Shaft
*Billet Output Shaft
*Billet Direct Drum with billet piston
*Ridged Band, Billet lever, and anchor
*Increased Clutch count in O.D. Brake-Forward-and Direct clutch packs
*Billet Servo
*Suncoast Full manual Valve body
*Suncoast Billet tripple disc converter
*Deep Transmission Pan
*External oil cooler
*Alto clutch and steels
second tranny is 4wd out of a 96 rebuilt 2k miles ago
it was rebuilt by sun coast nothing special new valve body there converter input and output shafts and i think thats it on it got everything if some one wants to do an auto conversion asking 2700 for full conversion or 2200 for tranny with converter
01 cab extended cab 500
01 short bed 500 no rust
01 fender 125 got both
01 24v engine 140k miles on it make an offer
extended cab short bed frame 900
bd twin turbo's super b kit make an offer there like 4500 new
dana 70 400 bucks with 355 gears
241 hd transfercase
vp pump
front drive shafts out of 3500
rear drive shaft out of a 01 ext cab short bed
read drive shaft out of a 97 reg cab long bed
also i have the head lights and some other stuff if u need something just ask i might have what you need also im negotiable on some stuff so make me offers ]]> General For Sale Section wylie513 http://www.cumminsforum.com/forum/general-sale-section/212257-lots-dodge-parts-high-perfomance-parts.html http://www.cumminsforum.com/forum/general-sale-section/212246-05-trx450r-fully-set-up.html Thu, 19 Nov 2009 23:51:49 GMT This is an excellent running and great looking 2005 TRX 450R with tons and tons of extras on and off the bike. I've been trying to sell the extra parts only, but nobody wanted to pick up on anything. Since I don't hardly ride anymore anyways I've decided to put the quad and everything else that I've got for it and sell it all together.

-480 athena big bore kit
-quinn ported and polished head
-+1mm kibblewhite valves w/heavy duty valve springs
-hotcams stage 2 cam
-power now valve
-curtis sparks full system exhaust
-ims extended pegs and nerf bars
-houser anti vibe stem, fasst flexx bars, precision stabilizer
-+.75 houser max clearance slicast arms with triple rate rezzie elkas
-+.50 houser swingarm with dual rate rezzie elka and elka long travel linkage
-lonestar adjustable axle and dual row bearing carrier
-9" hiper carbon fiber dual beadlocks in the rear and 9" single beadlocks in the front
-steel braided brake lines front and rear
-ims oversized tank and many more
-red meair plastic and quadtech carbon fiber hood.

the extras that come with it are:
-+2 houser long travel slicast tric trac arms
-quad rate elka elite long travel fronts
-+1.25 houser swingarm
-custom axis long travel rear with houser long travel linkage
-8" hiper carbon fiber dual beadlocks in the rear with extended center for more width
-9" hiper carbon fiber fronts flipped for more width
-front and rear set of tire balls.

Everything listed here and whatever extras that i forgot to list for $7500 obo. I'm located in southeast South Carolina and would be willing to drive a little to help out. Thanks for looking.

If you don't want both the MX set up and XC I would sell it as set up for one or the other with a price adjustment. ]]> General For Sale Section jatuggle http://www.cumminsforum.com/forum/general-sale-section/212246-05-trx450r-fully-set-up.html