Hello to all...

**ETDRAG** · 01-20-2007, 10:07 PM

We are happy to be a part of cumminsforum.com and look forward to working with and meeting the people that make this site what it is.

A little about E.T. Performance - I started this business about 9 years ago selling parts. At the time many of my friends and I were building Mustangs, Camaros, Corvettes, Ford & Chevy short bed trucks. We were racing every weekend and working on them every week. Naturally after a few years I started my shop. Recently I started the website etdrag.com for Internet sales and as a way to promote my services. In the last month we have purchased a Superflow chassis dyno, currently in the process of installing. We cannot wait until it is up and running, and we are especially excited about using it to tune Dodge, Ford and GMC diesels. I hope you will consider us for your parts needs, and if you live in the Houston area, we offer full installation of just about any part you can put on your Cummins Diesel. Whether it is an oil change or rebuilding rear ends and transmissions we are here.

__________________
99 2500 Ext. Cab 2wd. 4" Exhaust, K&N Conical filter, billet torque converter, built transmission w/typical upgrades, TST Box.

Thanks, David McLain
Owner of E/T Motorsports 2710 Preston
Pasadena, TX 77503 281-802-4617
www.etdrag.com david@etdrag.com

***gstanfield*** · 01-20-2007, 10:17 PM

I'm not in your area, but I would like to welcome you to the site. I'll chck you guys out when I am shopping for parts. I always like to support the guys who support us.

George

__________________
1997 2500 ext cab long bed 4x4 Boost control elbow, KDP tabbed, silncer ring MIA, Z-series gauges, 47RE built w/valve body & converter, #100 plate.

***AK RAM*** · 01-21-2007, 12:54 AM

Welcome to the site!

__________________
03, 4X4, QUAD, LWB, Standard Output, 47RE, 3.73, ATS TC/VB, DTT Trans/Billet, Flex Plate, TorqLoc, RAD, Twins, Snow, Hot Cp3, Injectors, Cam, 315s, 8,200 lbs wet.
12.32 @ 109 Videos: Vid 1 & Vid 2

Add yourself to the Cummins Forum Map.

***rgtrdt38*** · 01-21-2007, 07:37 AM

Welcome and thanks for sponsoring our site.

__________________
2007, 1-ton, 2WD, Khaki, Quad-Cab SLT, 5.9L, automatic with Jake brake. Quadzilla M3 with Commander on 'A' pillar. aFe Torque Tube installed with an AMSOIL 4090 in an Ice Box. Eric Buckel winter front and Stromberg-Carlson drop-center louvered tailgate. Tow 33' HitchHiker fifth-wheel.

***bway1341*** · 01-21-2007, 07:55 AM

Welcome to the site thanks for the support i will check out your site.

__________________
I got a gasser for now.

http://www.farmboysdiesel.com/

Wifes 05 2500 Afe Stage 2 South Bend DD-Clutch Air Dog 150, Smarty, Edge Juice with Att. And some more stuff

**Duluth Diesel** · 01-21-2007, 08:05 AM

Welcome to Cummins Forum!

__________________
AMSOIL ONLINE STORE - DISCOUNT PRICING AVAILABLE
CLICK HERE FOR A FREE AMSOIL CATALOG

TWIN PORT SALES - AMSOIL SHIPPED DIRECT

CHANGE YOUR THINKING, NOT YOUR OIL.

INJEN Nanofiber Intake Systems

TOMTOM · 01-21-2007, 09:18 AM

Welcome, your not far from me. Keep us posted on open house or dyno days.
Lot of diesels in our area.
TOMTOM

__________________
93 SRW D2500 X-CAB SHORT BED LE CTD AUTO BHAF P7100 PUMP PUMP MODS 4000 GSK 60# SPRINGS A1 STUDS FULL MANUAL 47RE BILLET INPUT SHAFT SUNCOAST TRIPLE DISC 440/967 13.31@101mph 0N #2

bow2no1 · 01-21-2007, 09:38 AM

welcome to CF! glad to have you here!

01-21-2007, 10:40 AM

Hello David.....welcome to the site

Sounds like you have alot to offer us

Cheers,Kevin

01-20-2007, 10:07 PM	#1 (permalink)
ETDRAG www.etdrag.com Join Date: Jan 2007 Location: Houston, TX Posts: 209 ETDRAG's Truck Pics	Hello to all... We are happy to be a part of cumminsforum.com and look forward to working with and meeting the people that make this site what it is. A little about E.T. Performance - I started this business about 9 years ago selling parts. At the time many of my friends and I were building Mustangs, Camaros, Corvettes, Ford & Chevy short bed trucks. We were racing every weekend and working on them every week. Naturally after a few years I started my shop. Recently I started the website etdrag.com for Internet sales and as a way to promote my services. In the last month we have purchased a Superflow chassis dyno, currently in the process of installing. We cannot wait until it is up and running, and we are especially excited about using it to tune Dodge, Ford and GMC diesels. I hope you will consider us for your parts needs, and if you live in the Houston area, we offer full installation of just about any part you can put on your Cummins Diesel. Whether it is an oil change or rebuilding rear ends and transmissions we are here. __________________ 99 2500 Ext. Cab 2wd. 4" Exhaust, K&N Conical filter, billet torque converter, built transmission w/typical upgrades, TST Box. Thanks, David McLain Owner of E/T Motorsports 2710 Preston Pasadena, TX 77503 281-802-4617 www.etdrag.com david@etdrag.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

01-20-2007, 10:17 PM	#2 (permalink)
*gstanfield* Moderator Join Date: Dec 2006 Location: Rolling Hills, WY Posts: 800 gstanfield's Truck Pics	I'm not in your area, but I would like to welcome you to the site. I'll chck you guys out when I am shopping for parts. I always like to support the guys who support us. George __________________ 1997 2500 ext cab long bed 4x4 Boost control elbow, KDP tabbed, silncer ring MIA, Z-series gauges, 47RE built w/valve body & converter, #100 plate.

01-21-2007, 12:54 AM	#3 (permalink)
*AK RAM* Tech Specialist Join Date: Feb 2006 Location: Alaska Posts: 2,610 AK RAM's Truck Pics	Welcome to the site! __________________ 03, 4X4, QUAD, LWB, Standard Output, 47RE, 3.73, ATS TC/VB, DTT Trans/Billet, Flex Plate, TorqLoc, RAD, Twins, Snow, Hot Cp3, Injectors, Cam, 315s, 8,200 lbs wet. 12.32 @ 109 Videos: Vid 1 & Vid 2 Add yourself to the Cummins Forum Map.

01-21-2007, 07:37 AM	#4 (permalink)
*rgtrdt38* V-10 to Cummins Join Date: Nov 2006 Location: Idaho Falls, Idaho Posts: 137 rgtrdt38's Truck Pics	Welcome and thanks for sponsoring our site. __________________ 2007, 1-ton, 2WD, Khaki, Quad-Cab SLT, 5.9L, automatic with Jake brake. Quadzilla M3 with Commander on 'A' pillar. aFe Torque Tube installed with an AMSOIL 4090 in an Ice Box. Eric Buckel winter front and Stromberg-Carlson drop-center louvered tailgate. Tow 33' HitchHiker fifth-wheel.

01-21-2007, 07:55 AM	#5 (permalink)
*bway1341* Cummins crazy Join Date: Nov 2006 Location: Jacksonville, NC Posts: 903 bway1341's Truck Pics	Welcome to the site thanks for the support i will check out your site. __________________ I got a gasser for now. http://www.farmboysdiesel.com/ Wifes 05 2500 Afe Stage 2 South Bend DD-Clutch Air Dog 150, Smarty, Edge Juice with Att. And some more stuff

01-21-2007, 08:05 AM	#6 (permalink)
Duluth Diesel Twin Port Sales, Authorized Amsoil Dealer Join Date: Mar 2006 Location: Superior, WI Posts: 6,156 Duluth Diesel's Truck Pics	Welcome to Cummins Forum! __________________ AMSOIL ONLINE STORE - DISCOUNT PRICING AVAILABLE CLICK HERE FOR A FREE AMSOIL CATALOG *TWIN PORT SALES - AMSOIL* SHIPPED DIRECT CHANGE YOUR THINKING, NOT YOUR OIL. INJEN Nanofiber Intake Systems**

01-21-2007, 09:18 AM	#7 (permalink)
TOMTOM Diesel Freak Join Date: Jun 2006 Location: SULPHUR LOUISIANA Posts: 526 TOMTOM's Truck Pics	Welcome, your not far from me. Keep us posted on open house or dyno days. Lot of diesels in our area. TOMTOM __________________ 93 SRW D2500 X-CAB SHORT BED LE CTD AUTO BHAF P7100 PUMP PUMP MODS 4000 GSK 60# SPRINGS A1 STUDS FULL MANUAL 47RE BILLET INPUT SHAFT SUNCOAST TRIPLE DISC 440/967 13.31@101mph 0N #2

01-21-2007, 09:38 AM	#8 (permalink)
bow2no1 Cummins Fan Join Date: Jun 2006 Location: maine Posts: 0 bow2no1's Truck Pics	welcome to CF! glad to have you here!

01-21-2007, 10:40 AM	#9 (permalink)
Guest Posts: n/a	Hello David.....welcome to the site Sounds like you have alot to offer us Cheers,Kevin