Juice w/attitude ?????

***fergusonmichael*** · 08-08-2008, 10:39 PM

I plan to buy the juice w/attitude soon. If I have gauges already and dont plan to install the egt probe. Can I disable that feature ? Also can you disable the backdown completely on any other parameters ? Any info is appreciated !

__________________
2007 2500 4x4 5.9L 48RE Quad Cab

s&b intake, cfm+ intake, 5in mbrp exhaust, airdog 100, edge juice w/attitude, isspro boost, pyro, & fuel.

2.5in skyjacker leveling kit, 18x9 xd badlnds & 33in toyo m/t's

2007 Honda CBR 600RR

joe03dodge · 08-08-2008, 11:06 PM

The juice will need the egt probe to operate, you can use the same probe for both gauges. If you get the hot unlock code it will not back down till you let off the go pedal. Dont run the top setings till you are ready to buy a trans my 48re lasted me a few weeks with the hot code, and i was not that hard on it.....

__________________
2007.5 3500 mega cab drw

2006 2500 ctd auto. Edge juice with attitude. sold

2003 international 4400

Last edited by joe03dodge : 08-08-2008 at 11:09 PM.

***btolenti*** · 08-08-2008, 11:22 PM

I ran my juice without the egt probe hooked up. It worked fine - but like was stated, the EGT backdown feature, egt temp reading and turbo timer would not work. But the juice itself does not 'need' the probe installed to work okay. You can run the juice and a regular gaude off the same probe though - or so I have heard.

__________________
06 Silver Quad Cab 4x4 Automatic
-4" Rancho Lift w/Superlift Traction Bars & Defiant Steering Support, 315 MTZ's on H2's
-Smarty, AFE Intake, Muffler Delete, Airdog100/Liberty Setup, ISSPRO Gauges, Amsoil BMK-11

***fergusonmichael*** · 08-09-2008, 01:23 AM

I was kinda wondering if you could run it off the same probe. I might have to try that.

__________________
2007 2500 4x4 5.9L 48RE Quad Cab

s&b intake, cfm+ intake, 5in mbrp exhaust, airdog 100, edge juice w/attitude, isspro boost, pyro, & fuel.

2.5in skyjacker leveling kit, 18x9 xd badlnds & 33in toyo m/t's

2007 Honda CBR 600RR

08-08-2008, 10:39 PM	#1 (permalink)
*fergusonmichael* Cummins Freak Join Date: Jun 2007 Location: Hemphill, Texas Posts: 93 fergusonmichael's Truck Pics	Juice w/attitude ????? I plan to buy the juice w/attitude soon. If I have gauges already and dont plan to install the egt probe. Can I disable that feature ? Also can you disable the backdown completely on any other parameters ? Any info is appreciated ! __________________ *2007 2500 4x4 5.9L 48RE Quad Cab* s&b intake, cfm+ intake, 5in mbrp exhaust, airdog 100, edge juice w/attitude, isspro boost, pyro, & fuel. 2.5in skyjacker leveling kit, 18x9 xd badlnds & 33in toyo m/t's 2007 Honda CBR 600RR

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Remove Advertisements Sponsored Links
Dodge Cummins Diesel Forum Advertisement

08-08-2008, 11:06 PM	#2 (permalink)
joe03dodge Cummins Fan Join Date: Jun 2008 Posts: 37 joe03dodge's Truck Pics	The juice will need the egt probe to operate, you can use the same probe for both gauges. If you get the hot unlock code it will not back down till you let off the go pedal. Dont run the top setings till you are ready to buy a trans my 48re lasted me a few weeks with the hot code, and i was not that hard on it..... __________________ 2007.5 3500 mega cab drw 2006 2500 ctd auto. Edge juice with attitude. sold 2003 international 4400 Last edited by joe03dodge : 08-08-2008 at 11:09 PM.

08-08-2008, 11:22 PM	#3 (permalink)
*btolenti* Diesel Freak Join Date: Nov 2006 Location: Orange, CA Posts: 782 btolenti's Truck Pics	I ran my juice without the egt probe hooked up. It worked fine - but like was stated, the EGT backdown feature, egt temp reading and turbo timer would not work. But the juice itself does not 'need' the probe installed to work okay. You can run the juice and a regular gaude off the same probe though - or so I have heard. __________________ 06 Silver Quad Cab 4x4 Automatic -4" Rancho Lift w/Superlift Traction Bars & Defiant Steering Support, 315 MTZ's on H2's -Smarty, AFE Intake, Muffler Delete, Airdog100/Liberty Setup, ISSPRO Gauges, Amsoil BMK-11

08-09-2008, 01:23 AM	#4 (permalink)
*fergusonmichael* Cummins Freak Join Date: Jun 2007 Location: Hemphill, Texas Posts: 93 fergusonmichael's Truck Pics	I was kinda wondering if you could run it off the same probe. I might have to try that. __________________ *2007 2500 4x4 5.9L 48RE Quad Cab* s&b intake, cfm+ intake, 5in mbrp exhaust, airdog 100, edge juice w/attitude, isspro boost, pyro, & fuel. 2.5in skyjacker leveling kit, 18x9 xd badlnds & 33in toyo m/t's 2007 Honda CBR 600RR