DTT1140 Smart Controller Manual?

[clc]

Is there a manual for the 1140? An electronic copy would be great.

I just got my 97 this month. It has a DTT1140 (SN 1101048) and a PAC exhaust brake on it. Not all of the lines are connected on the PACBrake so it is not currently working. I need to clean up (cut out and replace) much of the aftermarket wiring on the truck.

I have not had time to play with the controller. The adjustments are probably pretty obvious but some suggested settings and a wiring diagram would be nice to have.

The previous owner seemed to think it has an ATS VB and TC. I don't know if anything else in the transmission has been modified. It sure does not shift like stock.

Thanks,
Christopher

__________________
96 3500 4WD, 47RE, gauges; 97 3500 4WD 47RE, gauges; 97 3500 2WD 5-spd; all club cab. 98.5 2500 2WD SB, 5-spd, gauges, quad cab

[S. KONDOLAY]

I am not sure if you have already called in or not but the controller will only work properly with our vb. The controller was designed for our valve bodys back when they were done .

__________________
DTT -
www.dieseltrans.com
1-866-504-4002