DTT Trans quote

[Cumminsturbo22]

hey Guys, how much for some parts for my trans based on my signature? i dont want full billet. maybe just a TC,VB,billet input. or do you think i should be running more? THanks
Nick

__________________

2006 Ram 2500 6 inch lift, 37' BFG MBRP stacks 6" Mitre tips, AIRAID intake, Raptor 150, AFE Bladerunner, MP-8,Smarty!,

Why is there never enough time to do it right the first time,
But always enough time to do it again?

[S. KONDOLAY]

On the 2005 - 2007 Dodges it is tough to tell how far to go without seeing the unit.
The reason being , they have the electronic actuator on the side of the transmission that causes some light throttle hunting , 2 - 3 flare shifting , and some stacked shifting.
If your truck is experiencing these symptoms it may already have some clutch damgage that will dictate if you need to go farther. These conditions can have 2 causes. Either your electronics need replacing or you need to add a shift enhanser if your electronics are fine and you are still experiencing the issue.


Having said that , if your truck is not experiencing any of the above and you wish to do a partial upgrade only for the present, the vb, tc, servo and accum to help seal up the unit and the input is a nice upgrade. You can add the shift enhanser when you need it as well as it is an electronic box that can be added as required.

We do take a profile sheet on your truck to get a little more specific if we are doing the job for you as our stuff is custom but you can do partial if your truck is not having any issues .

__________________
DTT -
www.dieseltrans.com
1-866-504-4002

[S. KONDOLAY]

What is your email address , i will send you a truck profile sheet so we can send you some pricing info based on the specs on the truck.

__________________
DTT -
www.dieseltrans.com
1-866-504-4002

[Cumminsturbo22]

Originally Posted by S. KONDOLAY

What is your email address , i will send you a truck profile sheet so we can send you some pricing info based on the specs on the truck.

cumminsturbo22@aol.com
thanks! ill get back to you after i read it!
i appreciate it
Nick

__________________

2006 Ram 2500 6 inch lift, 37' BFG MBRP stacks 6" Mitre tips, AIRAID intake, Raptor 150, AFE Bladerunner, MP-8,Smarty!,

Why is there never enough time to do it right the first time,
But always enough time to do it again?

[S. KONDOLAY]

No problem.

__________________
DTT -
www.dieseltrans.com
1-866-504-4002

[BBRam]

Originally Posted by S. KONDOLAY

What is your email address , i will send you a truck profile sheet so we can send you some pricing info based on the specs on the truck.

What's the chances of me getting a profile sheet on the trans I have? I have talked with you before, but I purchased the trans from Charles Estep. Not sure where we stand with everything.

Thanks, BRIAN

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[S. KONDOLAY]

If it is something we specifically shipped parts to him for your build then we will have something coded . If it was his spare tranny he sold a few years ago , he is the best guy to give you the info. on the unit.

__________________
DTT -
www.dieseltrans.com
1-866-504-4002

[BBRam]

Originally Posted by S. KONDOLAY

If it was his spare tranny he sold a few years ago , he is the best guy to give you the info. on the unit.

It was.

__________________

03-3500, DRW, QC, 4x4, DTT Trans, Mag-Hytec, R700 BD Twins, BD IC Boots, BD Billet Flexplate, Lockup Switch, SMARTY TNT-R BETA/TS MP-8, Eliminator Fuel System, Floor It Stage 3 CP3 & Rail Cap, BIG Stix's by FTE, ARP Head Stud's, Springs, Fluidampr, ATS ARC-FLOW, AFE, Boost, Drive Pressure, Pyro, Fuel Pressure, Tran's Temp, Rail Pressure Gauge, GDP Ladder Bars, GrandRock 7" Miters. Old #'s (R/T .021, 60' 1.76, 1/4 ET 13.14 @ 100.45 mph)

[Turbod2500]

can i get a quote on a tc,vb,input also and maybe like a shift kit..?

__________________
01 extcab longbed....6in Stack..cfm intake elbow... Edge Comp....aFg stage 1..

[Stefan Kondolay]

I was out of town just saw your request. Sent it out.

[porkchop05]

if i could get a quot on a full trany i dont want break them any more im on my 3rd only 90,000 in the truck my email is mykelbonesteel@yahoo.com thanks

__________________
05 2wd cummins reg cab long bed with mbrp 5 inch and a airaid MXP intake, silencer ring got ate by the turbo no more, runs a 14.23 @ 98 mph

[S. KONDOLAY]

I sent you off an email .

__________________
DTT -
www.dieseltrans.com
1-866-504-4002