Water Seperator location..

[rufushusky]

Hi CF,

I am adding a P551311 water seperator to my set up...should I add this on the suction side or the pressure side of my Fass HPFP? TIA.

__________________
Dennis
04.5 Ram 2500 Reg Cab 4x4 5.9, 48re, AEM, Smarty, TS Ramifier, Banks High Ram,FASS HPFP, Boost/pyro/trans/FP/RP gauges, 5" Exhaust, Cat 2 micron fuel filter, Amsoil Bypass

[Diesel-Dan]

Originally Posted by rufushusky

Hi CF,

I am adding a P551311 water seperator to my set up...should I add this on the suction side or the pressure side of my Fass HPFP? TIA.

Im guessing this is the filter?

If its tighter than 100-150 microns....needs to go on the pressure side. Will have nothing but pressure issues if you put on the suction side of the pump.

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[rufushusky]

Originally Posted by Diesel-Dan

Im guessing this is the filter?

If its tighter than 100-150 microns....needs to go on the pressure side. Will have nothing but pressure issues if you put on the suction side of the pump.

Yeah it is a 10 micron. I was just thinking that after I posted that the Fass W/S are like 144 micron. Thanks a lot!

__________________
Dennis
04.5 Ram 2500 Reg Cab 4x4 5.9, 48re, AEM, Smarty, TS Ramifier, Banks High Ram,FASS HPFP, Boost/pyro/trans/FP/RP gauges, 5" Exhaust, Cat 2 micron fuel filter, Amsoil Bypass