What to do with the factory fuel line at the motor?

[Racing4funn]

It unhooked and plastic bagged because I have the FASS hooked up but its pushing very little fuel out and is always wet with fuel. I think the tank is pressurizing and pushing a small amount. If this is the case then this summer with more heat is going to make it worse.

__________________
2007 5.9 LWB Quad 4x4 Auto SLT
Bully Dog PMT, CFM+, 5" exhaust, Fass 95/150, Edge EZ, IceBox (Killer intake, get your money's worth ) DDP 90 sticks, MPI twins ordered

[Diesel-Dan]

Originally Posted by Racing4funn

It unhooked and plastic bagged because I have the FASS hooked up but its pushing very little fuel out and is always wet with fuel. I think the tank is pressurizing and pushing a small amount. If this is the case then this summer with more heat is going to make it worse.

Did you drain the filter head using the water drain? I bet that is your issue. Fuel will slosh with stop and go driving.

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[Racing4funn]

No.. I knew nothing about it.. I didnt hear anything here and nothing in the directions. So I just drain the filter?

__________________
2007 5.9 LWB Quad 4x4 Auto SLT
Bully Dog PMT, CFM+, 5" exhaust, Fass 95/150, Edge EZ, IceBox (Killer intake, get your money's worth ) DDP 90 sticks, MPI twins ordered

[Diesel-Dan]

Originally Posted by Racing4funn

No.. I knew nothing about it.. I didnt hear anything here and nothing in the directions. So I just drain the filter?

Yes...i would start there....

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[hillbillydeluxe]

Diesel dan just had a fass 150/150 installed by doug at advanced diesel technologies i love your system its great also seen an increase in mpgs and i am also glad with the lifetime warranty that shows how good your product is,just sent the warranty papers in today!!

[bahrfly]

not to hijack but i installed the airdog and was wondering what will happen if i remove the stock filter assembly it has the heater and water sensor in it will this give a code if unhooked??

__________________
:01.5 H/O 2500,6 speed ,Ice box , 4" Aero turbine ,edge comp:
, Airdog, isspro A pillar gauges, amsoil bybass,60 hp injectors,Valair clutch 20.5 mpg,Hwy

[Diesel-Dan]

WELL with an AD....Pandora's box will open and demons will come take your truck away from you, all the puppies and kitties will die, and beer will cease to exist........



Naw.....nothing....just bag up the plug ends and you will be just fine.

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[avshi750]

Originally Posted by Diesel-Dan

WELL with an AD....Pandora's box will open and demons will come take your truck away from you, all the puppies and kitties will die, and beer will cease to exist........

classic... comic timing on the net!

__________________
'95 Ram 2500 CTD 4x4
5" GrandRock turboback- HTT manifold-#5 TST plate-TST AFC spring w/washer swap-KDP tabbed-Fluidampr

[Harley27]

[quote=Diesel-Dan;545276]WELL with an AD....Pandora's box will open and demons will come take your truck away from you, all the puppies and kitties will die, and beer will cease to exist........

NO BEER!!!!!!!!!!!!

__________________


2006 Ram 2500 QC SB 6 Speed 4X4
Smarty, Banks High Ram intake, Silverline turbo back,
AEM Workhorse, Line-X, Auto Meter Fuel pressure, Boost, EGT,
BFG AT's , Airdog 150 and Southbend DD .

[Diesel-Dan]

Ain't I a Stinker?

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.

[hillbillydeluxe]

diesel dan if the fass would quit will the truck shut off or what also can i tape the ends with electrical tape or bag?

[Diesel-Dan]

Originally Posted by hillbillydeluxe

diesel dan if the fass would quit will the truck shut off or what also can i tape the ends with electrical tape or bag?

OK...im guessing you got 2 separate questions there.....

The FASS is designed to allow fuel to by-pass around the pump if the pump was to shut off. BUT it still draws through the filters.

As for bagging up the hose ends.....i would get a heavy duty garbage bag and cut it to fit. Then zip tie the bag to the line or plug.

Glad you are enjoying the FASS! Doug is a great guy!

__________________
Dan MacDonald
Diesel Performance Products
Head of Wnty/Trouble Shooting

Please don't PM me. I have a Vendor section just for CF users to post questions. I would like to keep everything public as it might help others with similar issues. Thanks for your understanding.